arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2401.14543cond-mat.mtrl-sci
收藏

提升镍基甲烷干重整催化剂性能的蜂窝整体式设计

Honeycomb monolithic design to enhance the performance of Ni-based catalysts for dry reforming of methane

Fazia Agueniou, Hilario Vidal, M. Pilar Yeste, Juan C. Hernandez-Garrido, Miguel A. Cauqui, Jose M. Rodriguez-Izquierdo, Jose J. Calvino, Jose M. Gatica

AI总结:

本研究将铈锆氧化物负载的Ni催化剂浸涂在堇青石蜂窝载体制成整体式催化剂,用于甲烷干重整,在高温高重时空速下性能接近热力学极限且稳定性优异,优于粉末催化剂。

摘要:

采用具有优异氧化还原性能的铈锆氧化物(摩尔比18/82,表面富二氧化铈)作为载体的负载型Ni催化剂(质量分数4.5%),通过浸涂法负载在堇青石蜂窝载体(230和400 cpsi)上。聚焦离子束扫描透射电子显微镜(FIB-STEM)揭示了常规技术无法分辨的纳米结构细节。研究在700-900℃、CH4:CO₂为1:1的进料条件下,在高重时空速(WHSV,115-346 L·g⁻¹·h⁻¹)范围内评估了催化剂的甲烷干重整性能。结构化催化剂的表现优于对应的粉末催化剂,从750℃起,两种反应物的转化率和H₂/CO比均接近热力学极限,且在长时间实验(24-48小时)中未观察到失活。这既与低负载量负载在堇青石上后仍保持的高催化效率有关,也得益于整体式反应器的固有优势,例如避免了高WHSV下粉末样品存在的动力学控制问题,同时抑制了失活。

英文摘要:

Supported Ni catalysts (4,5% wt%) using a Ce-Zr oxide (18/82 molar ratio and a ceria rich surface) depicting advanced redox properties, were deposited by washcoating over cordierite honeycombs (230 and 400 cpsi). FIB-STEM unveiled nanostructure details otherwise undistinguishable by conventional techniques. The catalytic performance was evaluated in the dry reforming of methane al 700-900 degree C, using a CH4:CO2 1:1 feddstock, and exploring high Weight Hourly Space Velocity (115-346 L.g-1.h-1). The structured catalyts exhibited better performance than the corresponding powers, reaching values close to rhermodynamics limits for booth reactants conversion and H2/CO ratio, from 750 dgree C, and no deactivation was observed in prolongued experiments (24-48 h). This was related to both the high catalytic efficiency after being deposited with low loading on the cordierite and the intrinsic advantages of the monolithic reactor, like preventing from the kinetic control that operates in powdered samples under high WHSV or limiting the deactivation.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑