用于3D打印的机器人胶带操控
Robot Tape Manipulation for 3D Printing
AI总结:
本文提出一种定制末端执行器胶带打印模块(TPM),利用胶带两端张力实现连续柔性胶带的机器人操控与3D打印,并验证了二维、三维结构及导电铜带电路和传感器的制造可行性。
摘要:
3D打印已经利用不同形式的材料(如丝材、片材和墨水)实现了各种应用。通常,在3D打印过程中,原料被转化为离散的构建单元,并被放置或沉积在指定位置,类似于离散物体的操控与组装。然而,对连续且柔性的胶带(其几何形态介于丝材和片材之间)进行不破坏、不转化的3D打印仍处于探索不足且具有挑战性的阶段。在此,我们报告了一种定制末端执行器——即胶带打印模块(TPM)的设计与实现,通过利用胶带在两个端点之间形成的张力来实现机器人胶带操控以进行3D打印。我们展示了制造具有代表性的二维和三维结构的可行性,同时利用导电铜带实现各种电子应用,如电路和传感器。我们相信,这种操控策略可以释放其他胶带材料在制造中的潜力,包括包装胶带和碳纤维预浸料胶带,并为机器人操控、3D打印和包装激发新的机制。
英文摘要:
3D printing has enabled various applications using different forms of materials, such as filaments, sheets, and inks. Typically, during 3D printing, feedstocks are transformed into discrete building blocks and placed or deposited in a designated location similar to the manipulation and assembly of discrete objects. However, 3D printing of continuous and flexible tape (with the geometry between filaments and sheets) without breaking or transformation remains underexplored and challenging. Here, we report the design and implementation of a customized end-effector, i.e., tape print module (TPM), to realize robot tape manipulation for 3D printing by leveraging the tension formed on the tape between two endpoints. We showcase the feasibility of manufacturing representative 2D and 3D structures while utilizing conductive copper tape for various electronic applications, such as circuits and sensors. We believe this manipulation strategy could unlock the potential of other tape materials for manufacturing, including packaging tape and carbon fiber prepreg tape, and inspire new mechanisms for robot manipulation, 3D printing, and packaging.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。