arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2401.00178physics.flu-dyn
收藏

通过挤压流动实验的数值模拟对触变性半固态浆料进行流变表征

Rheological characterization of a thixotropic semisolid slurry by means of numerical simulations of squeeze flow experiments

Georgios C. Florides, Georgios C. Georgiou, Michael Modigell, Eugenio José Zoqui

AI总结:

本研究提出一种利用挤压流动实验数据,通过数值模拟表征半固态金属浆料流变特性的方法,模型考虑结构参数变化,并与铝合金实验数据取得良好一致。

摘要:

我们提出了一种利用实验挤压流动数据对半固态金属浆料进行流变表征的方法。该浆料被建模为一种结构触变性粘塑性材料,遵循正则化的Herschel-Bulkley本构方程。所有流变参数均假定随结构参数变化,该结构参数由考虑材料结构破坏与重建的一阶动力学控制。在拉格朗日框架下,使用有限元方法对挤压流动进行模拟。我们研究了样品高度在宽范围的Bingham数和Reynolds数、幂律指数以及结构参数的动力学参数下的演变。我们与半固态铝合金(A356)的现有实验数据进行了系统比较,实验中样品在582°C的温度下,在指定应变80%的条件下从顶部压缩,而底部保持固定。只要在实验初始时刻(至0.01秒)施加的载荷远高于名义实验载荷,并且屈服应力和幂律指数随结构参数线性变化,就能与实验数据取得极好的一致性。第一个假设意味着在实验初始阶段需要采用不同的模型,例如弹粘塑性模型。至于第二个假设,通过允许屈服应力从0(无结构)变化到最大名义值(完全结构),以及幂律指数从0.2变化到1.4(即从剪切稀化到剪切增稠区域),可以重现样品高度的演变。这些变化与半固态浆料已知表现出的内部微观结构变化模式一致。

英文摘要:

We propose a methodology for the rheological characterization of a semisolid metal slurry using experimental squeeze flow data. The slurry is modeled as a structural thixotropic viscoplastic material, obeying the regularized Herschel-Bulkley constitutive equation. All rheological parameters are assumed to vary with the structure parameter that is governed by a first-order kinetics accounting for the material structure breakdown and build-up. The squeeze flow is simulated using finite elements in a Lagrangian framework. The evolution of the sample height has been studied for wide ranges of the Bingham and Reynolds numbers, the power-law exponent as well as the kinetics parameters of the structure parameter. Systematic comparisons have been carried out with available experimental data on a semisolid aluminium alloy (A356), where the sample is compressed from its topside under a specified strain of 80% at a temperature of 582 oC while the bottom side remains fixed. Excellent agreement with the experimental data could be achieved provided that at the initial instances (up to 0.01s) of the experiment the applied load is much higher than the nominal experimental load and that the yield stress and the power-law exponent vary linearly with the structure parameter. The first assumption implies that a different model, such as an elastoviscoplastic one, needs to be employed during the initial stages of the experiment. As for the second one, the evolution of the sample height can be reproduced allowing the yield stress to vary from 0 (no structure) to a maximum nominal value (full structure) and the power-law exponent from 0.2 to 1.4, i.e., from the shear-thinning to the shear-thickening regime. These variations are consistent with the internal microstructure variation pattern known to be exhibited by semisolid slurries.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑