Targetless IMU-LiDAR extrinsic calibration methods are gaining significant attention as the importance of the IMU-LiDAR fusion system increases. Notably, existing calibration methods derive calibration parameters under the assumption that the methods require full motion in all axes. When IMU and LiDAR are mounted on a ground robot the motion of which is restricted to planar motion, existing calibration methods are likely to exhibit degraded performance. To address this issue, we present GRIL-Calib: a novel targetless Ground Robot IMU-LiDAR Calibration method. Our proposed method leverages ground information to compensate for the lack of unrestricted full motion. First, we propose LiDAR Odometry (LO) using ground plane residuals to enhance calibration accuracy. Second, we propose the Ground Plane Motion (GPM) constraint and incorporate it into the optimization for calibration, enabling the determination of full 6-DoF extrinsic parameters, including theoretically unobservable direction. Finally, unlike baseline methods, we formulate the calibration not as sequential two optimizations but as a single optimization (SO) problem, solving all calibration parameters simultaneously and improving accuracy. We validate our GRIL-Calib by applying it to various real-world datasets and comparing its performance with that of existing state-of-the-art methods in terms of accuracy and robustness. Our code is available at https://github.com/Taeyoung96/GRIL-Calib.
MFCalib: Single-shot and Automatic Extrinsic Calibration for LiDAR and Camera in Targetless Environments Based on Multi-Feature Edge
College of Mechatronics and Control Engineering, Shenzhen University（深圳大学机电与控制工程学院）；Peng Cheng Laboratory（鹏城实验室）；Manifold Tech Limited（万孚科技有限公司）；The University of Hong Kong（香港大学）
The University of Hong Kong（香港大学）；Southern University of Science and Technology（南方科技大学）
In this letter, we present a novel method for automatic extrinsic calibration of high-resolution LiDARs and RGB cameras in targetless environments. Our approach does not require checkerboards but can achieve pixel-level accuracy by aligning natural edge features in the two sensors. On the theory level, we analyze the constraints imposed by edge features and the sensitivity of calibration accuracy with respect to edge distribution in the scene. On the implementation level, we carefully investigate the physical measuring principles of LiDARs and propose an efficient and accurate LiDAR edge extra…
Institute of Cyber-Systems and Control, Zhejiang University（浙江大学工业控制研究所）
Sensor calibration is the fundamental block for a multi-sensor fusion system. This paper presents an accurate and repeatable LiDAR-IMU calibration method (termed LI-Calib), to calibrate the 6-DOF extrinsic transformation between the 3D LiDAR and the Inertial Measurement Unit (IMU). % Regarding the high data capture rate for LiDAR and IMU sensors, LI-Calib adopts a continuous-time trajectory formulation based on B-Spline, which is more suitable for fusing high-rate or asynchronous measurements than discrete-time based approaches. % Additionally, LI-Calib decomposes the space into cells and iden…
Joint Optimization-based Targetless Extrinsic Calibration for Multiple LiDARs and GNSS-Aided INS of Ground Vehicles
Institute of Systems Engineering and Collaborative Laboratory for Intelligent Science and Systems, Macau University of Science and Technology（系统工程研究院和智能科学与系统联合实验室，澳门科学技术大学）；Institute for AI Industry Research (AIR), Tsinghua University（人工智能产业研究院（AIR），清华大学）
Determining the extrinsic parameter between multiple LiDARs and cameras is essential for autonomous robots, especially for solid-state LiDARs, where each LiDAR unit has a very small Field-of-View (FoV), and multiple units are often used collectively. The majority of extrinsic calibration methods are proposed for 360$^\circ$ mechanical spinning LiDARs where the FoV overlap with other LiDAR or camera sensors is assumed. Few research works have been focused on the calibration of small FoV LiDARs and cameras nor on the improvement of the calibration speed. In this work, we consider the problem of …
Multi-LiCa: A Motion and Targetless Multi LiDAR-to-LiDAR Calibration Framework
Institute of Automotive Technology（汽车技术研究所）；Munich Institute of Robotics and Machine Intelligence (MIRMI)（慕尼黑机器人与智能机械研究所）；Technical University of Munich（慕尼黑技术大学）
DATA61, CSIRO（联邦科学与工业研究组织数据61研究所）；Queensland University of Technology (QUT)（昆士兰科技大学）；Sun Moon University（鲜文大学）
The demand for multimodal sensing systems for robotics is growing due to the increase in robustness, reliability and accuracy offered by these systems. These systems also need to be spatially and temporally co-registered to be effective. In this paper, we propose a targetless and structureless spatiotemporal camera-LiDAR calibration method. Our method combines a closed-form solution with a modified structureless bundle adjustment where the coarse-to-fine approach does not {require} an initial guess on the spatiotemporal parameters. Also, as 3D features (structure) are calculated from triangula…
Accurate Calibration and Robust LiDAR-Inertial Odometry for Spinning Actuated LiDAR Systems
Engineering Research Center of Low-Altitude Perception and Detection Technology & Intelligent IoT, Ministry of Education, School of Automation, Guangdong University of Technology（低空感知与探测技术及智能物联网工程研究中心，教育部，自动化学院，广东工业大学）；School of Electrical and Electronic Engineering, Nanyang Technological University（电子与电气工程学院，南洋理工大学）
UniCalib: Targetless LiDAR-Camera Calibration via Probabilistic Flow on Unified Depth Representations
School of Computer Science, Wuhan University（武汉大学计算机学院）；School of Electronic Information, Wuhan University（武汉大学电子信息学院）；School of Artificial Intelligence, Wuhan University（武汉大学人工智能学院）
Achieving safe and reliable autonomous driving relies greatly on the ability to achieve an accurate and robust perception system; however, this cannot be fully realized without precisely calibrated sensors. Environmental and operational conditions as well as improper maintenance can produce calibration errors inhibiting sensor fusion and, consequently, degrading the perception performance. Traditionally, sensor calibration is performed in a controlled environment with one or more known targets. Such a procedure can only be carried out in between drives and requires manual operation; a tedious …
Institute of Industrial Science, The University of Tokyo（东京大学产业技术研究所）；Microsoft（微软）
In this paper, we propose a method of targetless and automatic Camera-LiDAR calibration. Our approach is an extension of hand-eye calibration framework to 2D-3D calibration. By using the sensor fusion odometry method, the scaled camera motions are calculated with high accuracy. In addition to this, we clarify the suitable motion for this calibration method. The proposed method only requires the three-dimensional point cloud and the camera image and does not need other information such as reflectance of LiDAR and to give initial extrinsic parameter. In the experiments, we demonstrate our method…
Southern University of Science and Technology（南方科技大学）；Zhejiang University（浙江大学）
This paper presents a novel 3D mapping robot with an omnidirectional field-of-view (FoV) sensor suite composed of a non-repetitive LiDAR and an omnidirectional camera. Thanks to the non-repetitive scanning nature of the LiDAR, an automatic targetless co-calibration method is proposed to simultaneously calibrate the intrinsic parameters for the omnidirectional camera and the extrinsic parameters for the camera and LiDAR, which is crucial for the required step in bringing color and texture information to the point clouds in surveying and mapping tasks. Comparisons and analyses are made to target…
This paper presents a framework for the targetless extrinsic calibration of stereo cameras and Light Detection and Ranging (LiDAR) sensors with a non-overlapping Field of View (FOV). In order to solve the extrinsic calibrations problem under such challenging configuration, the proposed solution exploits road markings as static and robust features among the various dynamic objects that are present in urban environment. First, this study utilizes road markings that are commonly captured by the two sensor modalities to select informative images for estimating the extrinsic parameters. In order to…
3DGS-Calib: 3D Gaussian Splatting for Multimodal SpatioTemporal Calibration
Huawei Paris Research Center（华为巴黎研究中心）；Noah’s Ark（诺亚方舟）；ICB UMR CNRS 6303, Université de Bourgogne（勃艮第大学ICB UMR CNRS 6303研究所）；Huawei London Research Center（华为伦敦研究中心）；ImViA UR 7535, Université de Bourgogne（勃艮第大学ImViA UR 7535研究所）；MIS UR 4290, Université de Picardie Jules Verne（儒勒·凡尔纳皮卡第大学MIS UR 4290研究所）
RAVES-Calib: Robust, Accurate and Versatile Extrinsic Self Calibration Using Optimal Geometric Features
School of Systems Science and Engineering, Sun Yat-Sen University（系统科学与工程学院，中山大学）；Defense Innovation Institute, Chinese Academy of Military Science（国防创新研究院，中国人民解放军军事科学院）；Intelligent Game and Decision Laboratory（智能游戏与决策实验室）；College of Computer Science and Technology, Harbin Engineering University（计算机科学与技术学院，哈尔滨工程大学）
