三维打印微流控芯片中层流合成亚微米CaCO$_3$颗粒
Laminar flow synthesis of submicron CaCO$_3$ particles in 3D printed microfluidic chips
AI总结:
本研究利用三维打印微流控芯片,通过层流与湍流两种机制合成CaCO$_3$颗粒,实现了亚微米及纳米级颗粒的可控生产,为微流控合成优化提供了重要见解。
摘要:
微流控技术为连续合成CaCO$_3$颗粒的挑战提供了解决方案。在本研究中,我们利用三维打印的微流控芯片合成了球霰石形式的CaCO$_3$微米和纳米颗粒。我们的主要焦点是研究一种专为这些颗粒结晶而设计的连续单相合成方法。通过结合共聚焦显微镜和扫描电子显微镜以及拉曼光谱,我们能够全面评估合成效率。该评估包括颗粒尺寸分布、形貌和多晶型组成等方面。结果揭示了在通道横截面积为2 mm$^2$的三维打印微流控芯片内存在两种不同的合成机制。在第一种机制中,以湍流为特征,产生了平均直径约为2 $\mu$m的颗粒,显示出较宽的尺寸分布。相反,第二种机制以层流为特征,导致亚微米颗粒(直径约800-900 nm)甚至纳米级颗粒(70-80 nm)的合成。这项研究为理解和优化微流控合成过程提供了宝贵的见解,特别是在实现亚微米和纳米级颗粒的可控生产方面。
英文摘要:
Microfluidic technology provides a solution to the challenge of continuous CaCO$_3$ particle synthesis. In this study, we utilized a 3D-printed microfluidic chip to synthesize CaCO$_3$ micro and nanoparticles in vaterite form. Our primary focus was on investigating a continuous one-phase synthesis method tailored for the crystallization of these particles. By employing a combination of confocal and scanning electron microscopy, along with Raman spectroscopy, we were able to thoroughly evaluate the synthesis efficiency. This evaluation included aspects such as particle size distribution, morphology, and polymorph composition. The results unveiled the existence of two distinct synthesis regimes within the 3D-printed microfluidic chips, featuring a channel cross-section of 2 mm$^2$. In the first regime, characterized by turbulence, particles with an average diameter of around 2 $μ$m were produced, displaying a broad size distribution. Conversely, the second regime, marked by laminar flow, led to the synthesis of submicron particles (approximately 800-900 nm in diameter) and even nanosized particles (70-80 nm). This research significantly contributes valuable insights to both the understanding and optimization of microfluidic synthesis processes, particularly in achieving controlled production of submicron and nanoscale particles.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。