arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2312.09462eess.SPcs.AIcs.LGphysics.app-ph
收藏

在计量数据上应用机器学习模型以预测器件电学性能

Applying Machine Learning Models on Metrology Data for Predicting Device Electrical Performance

imec(比利时微电子研究中心);University of Bologna(博洛尼亚大学)

Bappaditya Dey, Anh Tuan Ngo, Sara Sacchi, Victor Blanco, Philippe Leray, Sandip Halder

AI总结:

本研究针对半导体套刻误差影响器件电学性能的问题,基于imec N14 BEOL工艺的多阶段计量数据,用多种机器学习模型预测电容,证明其可提升电学结果预测效果。

摘要:

摩尔定律指出晶体管密度每两年会翻一番,得益于极紫外光刻、新型图案化技术等多方向的持续创新,这一定律至今仍得以维持,推动半导体产业迈向3nm节点及更先进制程。对于任何图案化方案而言,评估印刷图案质量的最重要指标是EPE(边缘放置误差),其中套刻误差是其最大的影响因素。套刻误差可能导致集成电路器件出现致命故障,例如在P2P电接触方面出现短路或连接断裂。因此,开发有效的套刻误差分析与控制技术,以确保制造出的半导体器件具备良好功能至关重要。\n在本研究中,我们采用imec N14后端制程(BEOL)工艺流程,使用LELE(光刻-刻蚀-光刻-刻蚀)图案化技术,通过193i光刻工艺印刷最小间距为48nm的金属层。FF结构被分解为两个掩模层(M1A和M1B),随后执行LELE工艺流程以制作最终图案。由于单个M1层被分解为两个掩模,控制两个掩模之间的套刻误差至关重要。本研究的目标有两方面:(a)量化套刻误差对电容的影响;(b)探究我们能否在早期阶段通过选定的机器学习模型预测最终的电容测量值。\n为此,我们在以下三个阶段对这些电学测试结构收集了散射测量光谱:(a)光刻后、(b)TiN硬掩模刻蚀后、(c)铜电镀与化学机械抛光(CMP)后。我们在光刻后、刻蚀后和铜CMP后,使用扫描电子显微镜(SEM)对线条-间距图案进行了关键尺寸和套刻误差测量。我们应用了多种机器学习模型,利用晶圆加工不同步骤的多种计量输入进行电容预测。最终我们证明,通过使用合适的机器学习模型,我们能够实现对电学结果更优的预测。

英文摘要:

Moore Law states that transistor density will double every two years, which is sustained until today due to continuous multi-directional innovations, such as extreme ultraviolet lithography, novel patterning techniques etc., leading the semiconductor industry towards 3nm node and beyond. For any patterning scheme, the most important metric to evaluate the quality of printed patterns is EPE, with overlay being its largest contribution. Overlay errors can lead to fatal failures of IC devices such as short circuits or broken connections in terms of P2P electrical contacts. Therefore, it is essential to develop effective overlay analysis and control techniques to ensure good functionality of fabricated semiconductor devices. In this work we have used an imec N14 BEOL process flow using LELE patterning technique to print metal layers with minimum pitch of 48nm with 193i lithography. FF structures are decomposed into two mask layers (M1A and M1B) and then the LELE flow is carried out to make the final patterns. Since a single M1 layer is decomposed into two masks, control of overlay between the two masks is critical. The goal of this work is of two-fold as, (a) to quantify the impact of overlay on capacitance and (b) to see if we can predict the final capacitance measurements with selected machine learning models at an early stage. To do so, scatterometry spectra are collected on these electrical test structures at (a)post litho, (b)post TiN hardmask etch, and (c)post Cu plating and CMP. Critical Dimension and overlay measurements for line-space pattern are done with SEM post litho, post etch and post Cu CMP. Various machine learning models are applied to do the capacitance prediction with multiple metrology inputs at different steps of wafer processing. Finally, we demonstrate that by using appropriate machine learning models we are able to do better prediction of electrical results.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑