arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2312.09145nucl-exphysics.app-phphysics.plasm-ph
收藏

利用激光生产放射性同位素:从基础科学到应用

Radioisotopes production using lasers: from basic science to applications

M. R. D. Rodrigues, A. Bonasera, M. Scisciò, J. A. Pérez-Hernández, M. Ehret, F. Filippi, P. L. Andreoli, M. Huault, H. Larreur, D. Singappuli, D. Molloy, D. Ra… 展开作者

M. R. D. Rodrigues, A. Bonasera, M. Scisciò, J. A. Pérez-Hernández, M. Ehret, F. Filippi, P. L. Andreoli, M. Huault, H. Larreur, D. Singappuli, D. Molloy, D. Raffestin, M. Alonzo, G. G. Rapisarda, D. Lattuada, G. L. Guardo, C. Verona, Fe. Consoli, G. Petringa, A. McNamee, M. La Cognata, S. Palmerini, T. Carriere, M. Cipriani, G. Di Giorgio, G. Cristofari, R. De Angelis, G. A. P. Cirrone, D. Margarone, L. Giuffrida, D. Batani, P. Nicolai, K. Batani, R. Lera, L. Volpe, D. Giulietti, S. Agarwal, M. Krupka, S. Singh, Fa. Consoli

AI总结:

本研究利用Vega III的1PW激光设施,通过激光加速质子的核反应生产医用放射性同位素,测量相关同位素角分布,验证了激光产同位素与传统加速器方法相比的竞争力。

摘要:

在理解啁啾脉冲放大(Chirped Pulse Amplification, CPA)技术后,激光技术得到了发展,该技术可将高能激光束压缩至数十飞秒(fs)的脉冲持续时间,并聚焦到几微米($μ$m)的尺度。例如,可采用靶法线鞘层加速(Target Normal Sheath Acceleration, TNSA)方法将数十MeV的质子加速,并聚焦到次级靶上。在这种条件下,会发生核反应,并可生产具有医疗用途的放射性同位素。高重复频率激光可用于生产足够医疗应用的同位素,这一途径与主要基于加速器的传统方法相比具有竞争力。本文研究了目前用于正电子发射断层扫描(positron emission tomography, PET)及其他应用的$^{67}$Cu、$^{63}$Zn、$^{18}$F和$^{11}$C的生产情况。同时,我们研究了$^{10}$B(p,$α$)$^{7}$Be和$^{70}$Zn(p,4n)$^{67}$Ga反应,以进一步约束不同角度下的质子分布;还研究了与能源生产相关的$^{11}$B(p,$α$)$^{8}$Be反应。实验在位于西班牙萨拉曼卡的Vega III装置的1拍瓦(petawatt, PW)激光设施上进行。使用高纯锗探测器(High Purity Germanium Detector, HPGE)测量了放射性同位素在(相对于激光方向的)前向和后向的角分布。我们的结果与采用Kimura等人(NIMA637(2011)167)方法得到的数值估计结果吻合良好。

英文摘要:

Laser technologies improved after the understanding of the Chirped Pulse Amplification (CPA) which allows energetic laser beams to be compressed to tens of femtosecond (fs) pulse durations and focused to few $μ$m. Protons of tens of MeV can be accelerated using for instance the Target Normal Sheath Acceleration (TNSA) method and focused on secondary targets. In such conditions, nuclear reactions can occur and radioisotopes relevant for medical purposes be produced. High repetition lasers can be used to produce enough isotopes for medical applications. This route is competitive to conventional methods mostly based on accelerators. In this paper we study the production of $^{67}$Cu, $^{63}$Zn, $^{18}$F and $^{11}$C currently used in positron emission tomography (PET) and other applications. At the same time, we study the reaction $^{10}$B(p,$α$)$^{7}$Be and $^{70}$Zn(p,4n)$^{67}$Ga to put further constraints to the proton distributions at different angles and to the reaction $^{11}$B(p,$α$)$^{8}$Be relevant for energy production. The experiment was performed at the 1 petawatt (PW) laser facility at Vega III located in Salamanca-Spain. Angular distributions of radioisotopes in the forward (with respect to the laser direction) and backward directions were measured using a High Purity Germanium Detector (HPGE). Our results are reasonably reproduced by the numerical estimates following the approach of Kimura et al. (NIMA637(2011)167)

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑