基于相似变换的干涉切趾——II. 实验验证
Interferometric apodization by homothety -- II. Experimental validation
AI总结:
本文通过基于马赫-曾德尔干涉仪的实验验证IAH孔径切趾技术,证实理论与实验高度吻合,并分析了波长和滤光片密度等参数的影响。
摘要:
本工作展示了采用基于相似变换的干涉切趾(Interferometric Apodization by Homothety,IAH)技术对圆形和矩形孔径进行切趾的实验室测试结果。IAH方法将仪器点扩散函数(PSF)的振幅分成两个相等部分。所产生的两个PSF之一经过相似变换,以改变其横向尺寸,同时对其振幅进行适当控制。随后将两个PSF组合,产生切趾图像。所得PSF的衍射翼随后按某一可变衰减因子降低,该因子取决于振幅参数γ和展宽参数η。这种切趾方法在实验室中通过基于马赫-曾德尔干涉仪(Mach-Zehnder Interferometer,MZI)的干涉装置实现。实验结果表明理论与实验高度一致。例如,在2.4λ/D的小角间隔下获得的平均实验对比度不超过5×10⁻⁴。本工作还使我们能够研究波长和中性滤光片密度等参数对切趾器性能的影响。
英文摘要:
This work presents the results of experimental laboratory tests on the apodization of circular and rectangular apertures using the Interferometric Apodization by Homothety (IAH) technique. The IAH approach involves splitting the amplitude of the instrumental PSF into two equal parts. One of the two produced PSFs undergoes a homothety to change its transverse dimensions while its amplitude is properly controlled. The two PSFs are then combined to produce an apodized image. The diffraction wings of the resulting PSF are subsequently reduced by some variable reduction factor, depending on an amplitude parameter $γ$ and a spread parameter $η$. This apodization approach was implemented in the laboratory using an interferometric setup based on the Mach-Zehnder Interferometer (MZI). The experimental results exhibit a strong agreement between theory and experiment. For instance, the average experimental contrast obtained at a low angular separation of $2.4λ/D$ does not exceed $5\times10^{-4}$. This work also allowed us to study the influence on the apodizer's performance of some parameters such as the wavelength and the density of the neutral filters.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。