arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2312.00744physics.flu-dyn
收藏

多孔燃烧器内预混氢气火焰回火的三维数值研究

Three-dimensional numerical investigation of flashback in premixed hydrogen flames within perforated burners

Filippo Fruzza, Hongchao Chu, Rachele Lamioni, Temistocle Grenga, Chiara Galletti, Heinz Pitsch

AI总结:

本研究通过三维数值模拟研究了多孔燃烧器中氢气预混火焰的回火特性,揭示了狭缝端部效应导致二维模拟系统性低估回火速度,证明三维模拟对准确预测家用燃烧器回火极限的必要性。

摘要:

预测回火是开发用于家用电器的新型多孔燃烧器中的关键挑战,尤其是在用氢气替代天然气作为燃料时。现有的大多数数值研究采用二维(2D)模拟来研究这些燃烧器中的回火,主要是为了降低计算成本。然而,回火现象固有的复杂性表明,二维模拟可能无法充分捕捉火焰动力学,从而可能导致对回火极限的估计不准确。在本研究中,采用三维(3D)模拟来考察实际狭缝形状对氢气预混火焰回火速度的影响。进行稳态模拟以计算三种当量比($ϕ=0.6$、$0.8$ 和 $1.0$)下的回火速度,研究具有固定宽度 $W$ 和不同长度 $L$ 的狭缝。此外,还进行了瞬态模拟以研究回火动力学。将结果与二维构型的结果进行比较,以评估无限狭缝近似的可靠性。对于稳定火焰,与具有实际装置典型长度的狭缝相比,二维模拟低估了燃烧器板温度,但当 $L\to\infty$ 时与三维结果一致。相反,与三维模拟相比,二维模拟始终低估回火速度,即使当 $L\to\infty$ 时也是如此。这是由于狭缝端部在回火动力学中起关键作用,在这些区域,有利的空气动力学、优先扩散、Soret效应以及由于较高的表面积与体积比而导致的更高预热触发了回火的起始。这些发现强调了采用三维模拟来准确估计家用多孔燃烧器中回火速度的必要性。

英文摘要:

Predicting flashback represents a pivotal challenge in the development of innovative perforated burners for household appliances, especially for substituting natural gas with hydrogen as fuel. Most existing numerical studies have utilized two-dimensional (2D) simulations to investigate flashback in these burners, primarily to reduce computational costs. However, the inherent complexity of flashback phenomena suggests that 2D simulations may inadequately capture the flame dynamics, potentially leading to inaccurate estimations of flashback limits. In this study, three-dimensional (3D) simulations are employed to examine the impact of the actual slit shapes on the flashback velocities of hydrogen-premixed flames. Steady-state simulations are conducted to compute flashback velocities for three equivalence ratios ($ϕ=0.6$, $0.8$, and $1.0$), investigating slits with fixed width $W$ and varying length $L$. Additionally, transient simulations are performed to investigate the flashback dynamics. The results are compared with those from 2D configurations to assess the reliability of the infinite slit approximation. For stable flames, 2D simulations underpredict the burner plate temperature compared to slits with lengths typical of practical devices but match the 3D results as $L\to\infty$. Conversely, flashback velocities are consistently underpredicted in 2D simulations compared to 3D simulations, even as $L\to\infty$. This is due to the critical role of the slit ends in flashback dynamics, where favorable aerodynamics, preferential diffusion, the Soret effect, and higher preheating due to a higher surface-to-volume ratio trigger the initiation of flashback in those regions. These findings underscore the necessity of employing 3D simulations to accurately estimate the flashback velocities in domestic perforated burners.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑