无需稳定照明和扫描位置信息的扫描衍射成像
Scanning diffraction imaging without stable illumination and scan position information
AI总结:
提出一种无需稳定照明和精确扫描位置信息的叠层衍射成像框架,通过波前调制器和新相位恢复流程,实现亚像素定位与多参数定量恢复,简化纳米尺度成像。
摘要:
叠层衍射成像(Ptychography)因其无透镜、高定量相衬成像的特点,已在全球同步辐射设施中成为表征生物和材料样品在纳米或原子尺度拓扑结构与性质的重要技术。其高分辨率成像依赖于精确的横向扫描位置信息、较大的重叠率以及稳定的探针函数。然而,随着研究向原子尺度推进,满足这些要求变得越来越困难,通常需要高精度运动控制和手动预校准。本文提出了一种新的成像框架。通过引入波前调制器和新的相位恢复流程,该方法消除了传统叠层衍射成像的严格限制。重要的是,我们的方法无需对波前调制器进行预校准。光学验证表明,恢复位置与顶级运动平台之间的偏差小于10纳米。即使在13%的重叠率下,也能实现亚像素位置精度。在一次X射线实验中,使用空间不稳定的探针(违反叠层衍射模型)且重叠率为18%,我们的方法同时定量恢复了光束空间偏差、扫描位置、探针函数和样品透射函数。值得注意的是,它测量到探针沿X轴500纳米和沿Y轴50纳米的空间偏差,这是以往方法无法实现的。凭借这些实验验证的优势,我们预期该方法将成为一种具有多参数自动定量校准能力的强大成像工具。它将简化扫描衍射显微镜的实现,并扩大其应用范围,尤其是在纳米和原子尺度成像领域。
英文摘要:
Ptychography has become prominent at synchrotron facilities worldwide for characterizing biological and material specimens' topological structures and properties at the nanometer or atomic scale, due to its lens - less, highly quantitative phase imaging. Its high - resolution imaging depends on accurate lateral scan position info, a large overlap ratio, and a stable probe function. But as research moves to atomic scales, meeting these requirements gets harder, often needing high - precision motion control and manual pre - calibration. This paper presents a new imaging framework. By adding a wavefront modulator and a new phase retrieval workflow, it removes the strict requirements of traditional ptychography. Significantly, our method doesn't need pre - calibration of the wavefront modulator. Optical validation showed the deviation between the recovered position and a top - tier motion stage was less than 10 nm. Sub - pixel position accuracy was achievable even with a 13% overlap ratio. In an X - ray experiment with a spatially unstable probe violating the ptychographic model and an 18% overlap ratio, our method simultaneously and quantitatively retrieved beam spatial deviation, scan position, probe function, and sample transmission function. Notably, it measured probe spatial deviations of 500nm along the X - axis and 50nm along the Y - axis, which is not feasible by previous methods. With these experimentally proven advantages, we anticipate our method to be a powerful imaging tool with auto - quantitative calibration of various parameters. It will simplify scanning diffraction microscopy implementation and expand its application scope, especially in nanometer and atomic scale imaging.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。