基于非线性带宽特性评估颗粒冲击阻尼器的耗能能力
Assessing the Dissipative Capacity of Particle Impact Dampers Based on their Nonlinear Bandwidth Characteristics
AI总结:
本文通过非线性带宽度量评估颗粒冲击阻尼器的耗能能力,发现颗粒初始拓扑显著影响时间-带宽积,最优配置可产生大非线性带宽,实现快速高效的冲击振动抑制。
摘要:
本文评估了与颗粒冲击阻尼器(PIDs)耦合的受冲击主结构(PSs)的耗能能力,该能力通过非线性带宽度量进行量化。所考虑的PIDs通过初始放置不同数量的球形线性粘弹性颗粒于不同的二维初始拓扑结构和间隙中而设计。利用离散元方法模拟了PIDs的强非线性和高度不连续的动力学,考虑了赫兹相互作用、滑动摩擦和颗粒旋转。采用非线性带宽的一般定义来评估集成PS-PID系统的能量耗散能力。此外,研究了PIDs的动力学对这些系统的时间-带宽积的影响,作为其存储或耗散振动能量能力的度量。研究发现,PID中颗粒的初始拓扑结构显著影响时间-带宽积,该积取决于冲击强度,可能打破线性时不变耗散谐振器所持有的经典单位极限。由多个颗粒组成的最优PS-PID系统产生较大的非线性带宽,表明PIDs对宽带输入能量具有强耗散能力。此外,在最优配置中,时间-带宽积(即存储在PS-PID系统中的输入冲击频率带宽的度量)与系统耗散初始能量的(1/e)所需时间相结合,可通过改变施加的冲击强度调谐至单位以上或以下。讨论了这些发现对所考虑系统耗能能力的影响,表明该能力可以被预测性地评估,从而使PIDs能够作为高度有效的非线性能量汇,快速且高效地抑制冲击引起的振动。
英文摘要:
The dissipative capacity as quantified by the nonlinear bandwidth measure of impulsively loaded primary structures (PSs) coupled to particle impact dampers (PIDs) is assessed. The considered PIDs are designed by initially placing different numbers of spherical, linearly viscoelastic granules at different 2D initial topologies and clearances. The strongly nonlinear and highly discontinuous dynamics of the PIDs are simulated via the discrete element method taking Hertzian interactions, slipping friction and granular rotations into account. The general definition of nonlinear bandwidth is used to evaluate the energy dissipation capacity of the integrated PS-PID systems. Moreover, the effect of the dynamics of the PIDs on the time-bandwidth product of these systems is studied, as a measure of their capacity to store or dissipate vibration energy. It is found that the initial topologies of the granules in the PID drastically affect the time-bandwidth product, which, depending on shock intensity, may break the classical limit of unity which holds for linear time-invariant dissipative resonators. The optimal PS-PID systems composed of multiple granules produce large nonlinear bandwidths, indicating strong dissipative capacity of broadband input energy by the PIDs. Additionally, in the optimal configurations, the time-bandwidth product, i.e., the measure of the frequency bandwidth of the input shock that is stored in the PS-PID system, in tandem with the amount of time it takes for the system to dissipate (1/e) of the initial energy, can be tuned either above or below unity by varying the applied shock intensity. The implications of these findings on the dissipative capacity of the system considered are discussed, showing that it can be predictively assessed so that PIDs can act as highly effective nonlinear energy sinks capable of rapid and efficient suppression of vibration induced by shocks.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。