通过控制和校准参数改善X射线衍射仪结果的分析
An analysis on improvement of x-ray diffractometer results by controlling and calibration of parameters
AI总结:
本研究分析了X射线衍射仪的校准参数,通过控制直射光束、光束切割和样品倾斜校准,对粉末和单晶样品的X射线能谱进行详细分析,确定了微晶尺寸和晶格参数等关键信息,并利用摇摆曲线确定了GaN的面外对准和FWHM值。
摘要:
实验室中的X射线衍射仪是科学领域分析材料的关键仪器。它几乎可用于任何晶体材料,如果适当控制机器参数,它能提供大量关于样品特性的信息。然而,这些机器获取的数据会因像差函数而变得复杂,这可以通过校准来解决。在本研究中,使用由硫酸钡(BaSO4)、氧化锌(ZnO)和铝(Al)组成的粉末作为第一个样品,以及由氮化镓(GaN)和氧化铝(Al2O3)组成的单晶样品作为第二个样品。分析并执行了X射线衍射仪所需的校准参数,即两个样品的直射光束校准、光束切割校准和样品倾斜校准。利用X射线能谱的结果,进行了重要参数的分析,包括峰位对应的晶面、晶面间距、强度、最小微晶尺寸和晶格参数,并与参考数据进行了比较。另一个结果是,可以使用摇摆曲线确定GaN的面外对准和半高全宽(FWHM)值。
英文摘要:
The X-ray diffractometer in the laboratory is a crucial instrument for analyzing materials in science. It can be used on almost any crystal material, and if the machine parameters are appropriately controlled, it can offer a lot of information about the samples characteristics. Nevertheless, the data obtained from these machines are complicated by an aberration function that can be resolved through calibration. In this study, a powder comprising of Barium Sulfate (BaSO4), Zinc Oxide (ZnO) and Aluminum (Al) was used as the first sample and a single crystal sample comprised of Gallium Nitride (GaN) and Aluminum Oxide (Al2O3). The required calibration parameters of the X-ray diffractometer namely: Straight Beam Alignment, Beam Cut Alignment and Sample Tilt Alignment for two samples were analyzed and carried out. Using the results of the X-ray spectrum, important parameters such as corresponding planes for peak positions, d-spacing of planes, intensities, smallest crystallite sizes and lattice parameters, and a comparison with the reference data were all carried out. As another result, the out-of-plane alignment and Full-Width at Half-Maximum (FWHM) value for GaN could be determined using the rocking curve.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。