M87在中心引擎100微角秒内的柱状喷流基部
The cylindrical jet base of M87 within 100$μ\rm{as}$ of the central engine
AI总结:
本文基于86 GHz高分辨率观测分析M87中心引擎100微角秒内的柱状喷流基部,通过厚壁柱状壳层模型约束其半径约144微角秒、壁宽约36微角秒,首次为黑洞喷流发射区几何提供直接观测约束。
摘要:
最近一篇关于利用全球毫米波甚长基线干涉阵列(Global Millimeter VLBI Array)、相位化阿塔卡马大型毫米/亚毫米阵列(Atacama Large Millimeter/submillimeter Array)和格陵兰望远镜(Greenland Telescope)进行86 GHz高分辨率观测的文章,描述了在25 μas < z < 100 μas范围内探测到一个边缘增亮的柱状喷流,其中z是天空中平面内相对于超大质量黑洞的轴向位移。研究表明,该喷流比事件视界出发的电磁(Blandford-Znajek)喷流的二维模拟所预测的要宽得多,准直性也强得多。这是一个出乎意料的发现。所声称的与吸积流相连的喷流探测,首次在任何黑洞喷流系统中为喷流发射区域的几何结构和物理过程提供了直接的观测约束。这一具有里程碑意义的探测值得进一步分析。本文重点关注最基本的性质,即所探测到的喷流发射源形状和尺寸,由于视线效应,其确定并非易事。我们分析了简单的厚壁柱状壳层源模型,以约束喷流壁的厚度。分析表明,这是一个管状喷流源,半径R ≈ 144 μas ≈ 38M,管状喷流壁的宽度W ≈ 36 μas ≈ 9.5M,其中M是黑洞的几何化质量(其体积与内部空腔的体积相当)。观测到的柱状喷流与高度边缘增亮的喷流(此前被描述为厚壁管状喷流)连续相连,后者延伸至z > 0.65 mas,两者很可能实际上是同一股外流(即来自同一中心引擎)。
英文摘要:
A recent article on high-resolution 86 GHz observations with the Global Millimeter VLBI Array, the phased Atacama Large Millimeter/submillimeter Array, and the Greenland Telescope describes the detection of a limb-brightened cylindrical jet, $25 μ\rm{as}< z< 100 μ\rm{as}$, where $z$ is the axial displacement from the supermassive black hole in the sky plane. It was shown to be much wider and much more collimated than 2D simulations of electromagnetic (Blandford-Znajek) jets from the event horizon predicted. This was an unanticipated discovery. The claimed detection of a jet connected to the accretion flow provides a direct observational constraint on the geometry and physics of the jet launching region for the first time in any black hole jetted system. This landmark detection warrants further analysis. This Letter focuses on the most rudimentary properties, the shape and size of the source of the detected jet emission, the determination of which is not trivial due to line-of-sight effects. Simple thick-walled cylindrical shell models for the source were analyzed to constrain the thickness of the jet wall. The analysis indicates a tubular jet source with a radius $R\approx 144 μ\rm{as}\approx 38M$ and that the tubular jet walls have a width $W \approx 36μ\rm{as} \approx 9.5 M$, where $M$ is the geometrized mass of the black hole (a volume comparable to that of the interior cavity). The observed cylindrical jet connects continuously to the highly limb-brightened jet (previously described as a thick-walled tubular jet) that extends to $z> 0.65$ mas, and the two are likely in fact the same outflow (i.e., from the same central engine).
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。