arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2310.08656cs.NIcs.LGeess.SP
收藏

SplitBeam:通过拆分计算实现Wi-Fi网络中高效且有效的波束成形

SplitBeam: Effective and Efficient Beamforming in Wi-Fi Networks Through Split Computing

Donald Bren School of Information and Computer Sciences, University of California at Irvine(加州大学欧文分校唐纳德·布伦信息与计算机科学学院);Institute for the Wireless Internet of Things, Northeastern University(东北大学无线物联网研究所)

Niloofar Bahadori, Yoshitomo Matsubara, Marco Levorato, Francesco Restuccia

AI总结:

SplitBeam通过拆分深度神经网络直接从CSI输出波束成形矩阵,并求解瓶颈优化问题,在保持误码率接近现有方法的同时,将反馈大小和计算复杂度分别降低81%和84%,且上报延迟小于10毫秒。

摘要:

现代IEEE 802.11(Wi-Fi)网络广泛依赖多输入多输出(MIMO)技术来显著提升吞吐量。为了正确地对MIMO传输进行波束成形,接入点需要频繁地从每个关联的站点获取波束成形矩阵(BM)。然而,矩阵的大小随天线和子载波数量的增加而增长,导致空中开销和站点计算负载不断增加。传统方法要么带来过高的计算负载,要么损失波束成形精度。为此,我们提出了SplitBeam,这是一个新框架,其中我们训练一个拆分深度神经网络(DNN),以信道状态信息(CSI)矩阵作为输入,直接输出BM。我们构建并求解一个瓶颈优化问题(BOP),以将计算量、空中开销和误码率(BER)保持在应用要求之下。我们在两种不同环境中使用现成的Wi-Fi设备进行了广泛的实验性CSI采集,并将SplitBeam的性能与标准IEEE 802.11算法(用于BM反馈)以及最先进的基于DNN的方法LB-SciFi进行了比较。我们的实验结果表明,SplitBeam将波束成形反馈大小和计算复杂度分别减少了高达81%和84%,同时将BER保持在现有方法的约10^-3以内。我们还在FPGA硬件上实现了SplitBeam DNN,以估计端到端的BM上报延迟,并表明在最复杂的场景中,该延迟小于10毫秒,这符合现实多用户MIMO场景中目标信道探测频率的要求。

英文摘要:

Modern IEEE 802.11 (Wi-Fi) networks extensively rely on multiple-input multiple-output (MIMO) to significantly improve throughput. To correctly beamform MIMO transmissions, the access point needs to frequently acquire a beamforming matrix (BM) from each connected station. However, the size of the matrix grows with the number of antennas and subcarriers, resulting in an increasing amount of airtime overhead and computational load at the station. Conventional approaches come with either excessive computational load or loss of beamforming precision. For this reason, we propose SplitBeam, a new framework where we train a split deep neural network (DNN) to directly output the BM given the channel state information (CSI) matrix as input. We formulate and solve a bottleneck optimization problem (BOP) to keep computation, airtime overhead, and bit error rate (BER) below application requirements. We perform extensive experimental CSI collection with off-the-shelf Wi-Fi devices in two distinct environments and compare the performance of SplitBeam with the standard IEEE 802.11 algorithm for BM feedback and the state-of-the-art DNN-based approach LB-SciFi. Our experimental results show that SplitBeam reduces the beamforming feedback size and computational complexity by respectively up to 81% and 84% while maintaining BER within about 10^-3 of existing approaches. We also implement the SplitBeam DNNs on FPGA hardware to estimate the end-to-end BM reporting delay, and show that the latter is less than 10 milliseconds in the most complex scenario, which is the target channel sounding frequency in realistic multi-user MIMO scenarios.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑