arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2310.05765cs.CEcs.RO
收藏

检查在可变形地形中挖掘的轮式装载机的仿真到现实差距

Examining the simulation-to-reality gap of a wheel loader digging in deformable terrain

Komatsu Ltd.(小松公司);Umeå University(于默奥大学);Algoryx Simulation(Algoryx仿真公司)

Koji Aoshima, Martin Servin

AI总结:

本研究评估基于物理的仿真器复现轮式装载机铲斗装填过程的能力,发现仿真与现实的差距约为10%,且对保真度依赖性弱,同时验证了力反馈控制器跨域迁移时的性能下降情况。

摘要:

我们研究基于物理的仿真器能在多大程度上复现真实轮式装载机在土壤堆中进行铲斗装填的过程。比较使用了车辆运动和驱动力、装载质量以及总功的现场测试时间序列。车辆被建模为带有摩擦接触、传动系和线性执行器的刚性多体系统。对于土壤,我们测试了不同分辨率的离散元模型,包含和不包含多尺度加速。时空分辨率在50-400 mm和2-500 ms之间,计算速度在比实时快1/10,000到5倍之间。发现仿真到现实差距约为10%,且对保真度水平表现出弱依赖性,例如与实时仿真兼容。此外,还研究了优化的力反馈控制器在不同仿真域之间迁移时的敏感性。观察到域偏差导致性能下降5%,尽管域差距约为15%。

英文摘要:

We investigate how well a physics-based simulator can replicate a real wheel loader performing bucket filling in a pile of soil. The comparison is made using field test time series of the vehicle motion and actuation forces, loaded mass, and total work. The vehicle was modeled as a rigid multibody system with frictional contacts, driveline, and linear actuators. For the soil, we tested discrete element models of different resolutions, with and without multiscale acceleration. The spatio-temporal resolution ranged between 50-400 mm and 2-500 ms, and the computational speed was between 1/10,000 to 5 times faster than real-time. The simulation-to-reality gap was found to be around 10% and exhibited a weak dependence on the level of fidelity, e.g., compatible with real-time simulation. Furthermore, the sensitivity of an optimized force feedback controller under transfer between different simulation domains was investigated. The domain bias was observed to cause a performance reduction of 5% despite the domain gap being about 15%.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑