arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2309.04584astro-ph.IM
收藏

大型蜂窝镜主动光学校正分析

Analysis of active optics correction for a large honeycomb mirror

Solvay Blomquist, Hubert Martin, Hyukmo Kang, Rebecca Whitsitt, Kevin Derby, Heejoo Choi, Ewan S. Douglas, Daewook Kim

AI总结:

针对空间大型蜂窝主镜热致波前误差,本文结合有限元、Zemax光线追迹和作动器弯曲模态分析主动光学校正,在物理限制内实现30小时低于25 nm RMS面形误差。

摘要:

在天基大型望远镜系统的开发中,具备执行主动光学校正的能力,可以校正由热扰动引起的波前像差,从而在放宽稳定性要求的情况下实现衍射极限性能。我们提出了一种用于当前地基望远镜的主动光学校正方法,并仿真了其在空间中大型蜂窝主镜上的有效性。我们使用望远镜的有限元模型来预测由热梯度引起的光学元件失调和主镜面形误差。这些预测的面形误差数据被输入 Zemax 光线追迹分析,以生成像面处的波前误差图。在分析中,我们假设波前误差中的倾斜、离焦和彗差通过调整望远镜指向和移动次镜来校正。剩余的中高阶误差则通过作动器对主镜进行物理弯曲来校正。各个作动器的影响被组合形成弯曲模态,这些模态从低阶到高阶校正,其刚度逐渐增加。所用模态的数量是一个变量,决定了校正精度和作用力的大小。我们探究了在作动器作用力能力和镜内应力限制下能够实现的校正程度。在保持这些物理限制范围内的同时,我们能够在30小时的仿真数据中证明低于25 nm RMS的面形误差。该仿真结果将成为望远镜光学性能端到端仿真的一部分,该端到端仿真包括动态扰动、波前传感,以及在真实作动器性能下对准和镜面形状的主动控制。

英文摘要:

In the development of space-based large telescope systems, having the capability to perform active optics correction allows correcting wavefront aberrations caused by thermal perturbations so as to achieve diffraction-limited performance with relaxed stability requirements. We present a method of active optics correction used for current ground-based telescopes and simulate its effectiveness for a large honeycomb primary mirror in space. We use a finite-element model of the telescope to predict misalignments of the optics and primary mirror surface errors due to thermal gradients. These predicted surface error data are plugged into a Zemax ray trace analysis to produce wavefront error maps at the image plane. For our analysis, we assume that tilt, focus and coma in the wavefront error are corrected by adjusting the pointing of the telescope and moving the secondary mirror. Remaining mid- to high-order errors are corrected through physically bending the primary mirror with actuators. The influences of individual actuators are combined to form bending modes that increase in stiffness from low-order to high-order correction. The number of modes used is a variable that determines the accuracy of correction and magnitude of forces. We explore the degree of correction that can be made within limits on actuator force capacity and stress in the mirror. While remaining within these physical limits, we are able to demonstrate sub-25 nm RMS surface error over 30 hours of simulated data. The results from this simulation will be part of an end-to-end simulation of telescope optical performance that includes dynamic perturbations, wavefront sensing, and active control of alignment and mirror shape with realistic actuator performance.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑