基于深度学习的金属-绝缘体-金属超表面高精度预测
High-Accuracy Prediction of Metal-Insulator-Metal Metasurface with Deep Learning
AI总结:
本文提出用ResNets-10深度学习模型高精度预测金属-绝缘体-金属超表面的S11参数,通过两阶段训练实现超低预测误差,可替代传统电磁计算并加速器件设计。
摘要:
近年来,利用深度学习预测电磁软件计算结果已成为广泛讨论的问题,但预测精度仍然是待解决的挑战之一。本工作提出使用ResNets-10模型预测等离激元超表面的S11参数。通过k折交叉验证和小学习率进行两阶段训练。训练完成后,铝、金和银金属-绝缘体-金属超表面的预测损失分别为-48.45、-46.47和-35.54。由于误差值极低,所提出的网络在一定结构范围内可以替代传统电磁计算方法进行计算。此外,该网络可在少于1,100个训练轮次内完成训练过程,这意味着网络训练过程可以有效缩短设计流程时间。我们提出的ResNets-10模型还可用于设计超衍射器件和生物传感器,从而减少计算过程所需的时间。该网络的超低误差表明,本工作有助于未来人工智能电磁计算软件的发展。
英文摘要:
Deep learning prediction of electromagnetic software calculation results has been a widely discussed issue in recent years. But the prediction accuracy was still one of the challenges to be solved. In this work, we proposed that the ResNets-10 model was used for predicting plasmonic metasurface S11 parameters. The two-stage training was performed by the k-fold cross-validation and small learning rate. After the training was completed, the prediction loss for aluminum, gold, and silver metal-insulator-metal metasurfaces was -48.45, -46.47, and -35.54, respectively. Due to the ultralow error value, the proposed network can replace the traditional electromagnetic computing method for calculation within a certain structural range. Besides, this network can finish the training process less than 1,100 epochs. This means that the network training process can effectively lower the design process time. The ResNets-10 model we proposed can also be used to design meta-diffractive devices and biosensors, thereby reducing the time required for the calculation process. The ultralow error of the network indicates that this work contributes to the development of future artificial intelligence electromagnetic computing software.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。