arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2306.07510eess.SYcs.SY
收藏

需要过程控制?LSTMc 就够了!

Require Process Control? LSTMc is all you need!

Niranjan Sitapure, Joseph S Kwon

AI总结:

针对传统化工过程控制器的局限性,提出一种无模型数据驱动的LSTMc控制器,结合序列模型与过程数据,在葡萄糖结晶控制中实现低于2%的设定点偏差,性能优于PI和MPC,且抗噪性强。

摘要:

在过去三十年中,研究人员开发了大量控制器用于调控复杂化工过程,但这些控制器存在一定局限性。传统PI/PID控制器通常需要针对不同设定点场景进行定制化整定。另一方面,MPC(模型预测控制)框架包含大量资源密集型步骤,而黑箱机器学习(ML)模型的使用可能引发局部最小值、不可行性等问题。因此,亟需一种兼具PI控制器简洁性与MPC方法批次间(G2G)可迁移性的替代控制器范式。\n为此,我们开发了一种新型LSTM控制器(LSTMc),作为无模型的数据驱动控制器框架。LSTMc采用增强输入张量,该张量整合了当前及前W个时间步的状态演化信息与误差动态信息,用于预测下一步的操纵输入(u_{t+1})。\n为验证LSTMc的性能,我们选取葡萄糖间歇结晶过程作为代表性案例研究。设定点跟踪的期望输出为平均晶体尺寸(\bar{L}),操纵输入为夹套温度(T_j)。我们构建了涵盖7000余种不同操作条件的大规模训练数据,确保LSTMc能在广阔的状态空间区域内得到充分训练。作为对比,我们还针对不同设定点跟踪场景设计了PI控制器和LSTM-MPC。\n实验结果一致表明,LSTMc实现了最低的设定点偏差(<2%),比MPC低三倍。值得注意的是,即使传感器测量值包含10%至15%的噪声水平,LSTMc仍能在所有设定点下保持这种优异性能。综上,通过有效利用过程数据并采用序列机器学习模型,LSTMc提供了一种更优的控制器设计方案。

英文摘要:

Over the past three decades, numerous controllers have been developed to regulate complex chemical processes, but they have certain limitations. Traditional PI/PID controllers often require customized tuning for various set-point scenarios. On the other hand, MPC frameworks involve resource-intensive steps, and the utilization of black-box machine learning (ML) models can lead to issues such as local minima and infeasibility. Thus, there is a need for an alternative controller paradigm that combines the simplicity of a PI controller with the grade-to-grade (G2G) transferability of an MPC approach. To this end, we developed a novel LSTM controller (LSTMc) as a model-free data-driven controller framework. The LSTMc considers an augmented input tensor that incorporates information on state evolution and error dynamics for the current and previous $W$ time steps, to predict the manipulated input at the next step ($u_{t+1}$). To demonstrate LSTMc, batch crystallization of dextrose was taken as a representative case study. The desired output for set-point tracking was the mean crystal size ($\bar{L}$), with the manipulated input being the jacket temperature ($T_j$). Extensive training data, encompassing 7000+ different operating conditions, was compiled to ensure comprehensive training of LSTMc across a wide state space region. For comparison, we also designed a PI controller and an LSTM-MPC for different set-point tracking cases. The results consistently showed that LSTMc achieved the lowest set-point deviation ($<$2\%), three times lower than the MPC. Remarkably, LSTMc maintained this superior performance across all set points, even when sensor measurements contained noise levels of 10\% to 15\%. In summary, by effectively leveraging process data and utilizing sequential ML models, LSTMc offers a superior controller design approach.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑