模拟井筒冷却引起的热应力对水力压裂破裂压力和裂缝几何形态的影响
Modeling the impact of thermal stresses induced by wellbore cooldown on the breakdown pressure and geometry of a hydraulic fracture
AI总结:
本研究通过耦合数值模型模拟井筒冷却产生的热应力,发现冷却可降低破裂压力、促进横向起裂,对水力压裂起裂和早期扩展有重要影响。
摘要:
在增强型地热系统(EGS)和高温石油储层中,井筒冷却常在储层刺激和/或水力压裂应力测试之前采用。冷却活动期间热传导产生的热弹性应力可能对水力压裂行为产生重要影响。本研究开发了一个耦合数值模型,以研究预注入井筒冷却对井筒压力和水力压裂几何形态(沿井筒轴线纵向或横向)的热力学效应。该数值研究的主要新颖之处在于,在水力压裂起裂和扩展的耦合非线性问题中考虑了显著的近井筒热应力,从而能够研究不同裂缝扩展机制下的热力学效应。模拟结果表明,冷却循环导致裂缝更早起裂和更低的破裂压力。广泛的井筒冷却也显著改变了井筒压力的演变,这在不同冷却条件下观察到的差异中得到了证实。最重要的是,在无冷却时裂缝起裂为纵向的情况下,冷却促进了水力裂缝的横向起裂。最容易发生裂缝起裂几何形态完全改变的情况是那些平行于最小水平应力钻探的水平井,但也适用于垂直应力小于任一水平主应力的情况下的垂直井。这些结果共同表明,冷却对水力压裂起裂和早期扩展具有深远的影响潜力,因此在需要冷却作业时,必须在应力测试和储层刺激的规划和解释中予以考虑。
英文摘要:
Wellbore cooldown is often employed before well stimulation and/or hydraulic fracture stress testing in EGS and high temperature petroleum reservoirs. The thermo-elastic stress resulting from heat conduction during the cooling activity can have important influence on the behavior of the hydraulic fractures. A coupled numerical model has been developed to study the thermo-mechanical effect associated with pre-injection wellbore cooldown on the wellbore pressure and geometry of the hydraulic fracture (either longitudinal or transverse to the wellbore axis). The main novelty of this numerical study is the consideration of significant near-wellbore thermal stresses in the coupled non-linear problem of hydraulic fracturing initiation and propagation, which enables investigation of the thermo-mechanical effect under different fracture propagation regimes. Simulation results show earlier fracture initiation and lower breakdown pressure caused by cooling circulation. Extensive wellbore cooling also significantly alters the evolution of wellbore pressure, as evidenced by the differences observed under various cooling conditions. Most importantly, cooling promotes the transverse initiation of hydraulic fractures in situations where the initiation would have been longitudinal in the absence of cooling. The cases most susceptible to the complete change of fracture initiation geometry are those horizontal wells drilled parallel to the minimum horizontal stress but also applicable to vertical wells in cases where the vertical stress is the lower in magnitude than either horizontal principal stress. These results combine to indicate a profound potential for cooling to impact hydraulic fracture initiation and early growth, and therefore needs to be considered in the planning and interpretation of stress testing and reservoir stimulation when cooling operations are necessary.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。