arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2306.06013cs.CE
收藏

基于耦合 DEM-FEM 仿真的增材制造中内聚粉末改进辊铺粉策略探索

Exploration of improved, roller-based spreading strategies for cohesive powders in additive manufacturing via coupled DEM-FEM simulations

Reimar Weissbach, Patrick M. Praegla, Wolfgang A. Wall, A. John Hart, Christoph Meier

AI总结:

本研究利用耦合 DEM-FEM 框架探索增材制造中高内聚粉末的改进辊铺粉策略,发现结合适当的辊子表面摩擦力与运动学(如旋转振荡)能有效破坏颗粒内聚力,实现超过 50% 的堆积分数,并提升铺粉质量与稳健性。

摘要:

将细粉(D50 <=20um)铺展成薄层通常需要辊子等机构来克服颗粒间的内聚力。辊铺粉需要仔细优化,且可能根据粉末原料的特性导致低密度和/或不一致的粉末层。在此,我们使用集成的离散元-有限元(DEM-FEM)框架探索针对高内聚粉末的改进型辊铺粉策略。粉末特性采用基于 Ti-6Al-4V 0-20um 粉末实验校准的自相似方法进行模拟。我们发现,最佳的辊铺粉依赖于辊子表面摩擦力与辊子运动学的结合,后者提供足够的动能来破坏粉末颗粒间的内聚键。然而,过度旋转会提供过多的动能,导致颗粒喷出并形成不均匀的粉末层。有趣的是,逆向旋转和旋转振荡所确定的最佳表面速度非常相似,表明该物理量是关键的运动学参数。当这些条件被适当地选择时,对于小至示例粉末 D90 约 2 倍的层厚,预测其堆积分数可超过 50%,并且粉末层质量在 10 倍范围内的基底附着力下保持稳健。鉴于增材制造(AM)中由于熔合/结合与裸露粉末区域的结合导致基底条件在空间上变化,后者是一个重要的考量因素。与逆向旋转相比,所提出的旋转振荡特别具有吸引力,因为它可以克服辊子机构机械径向跳动带来的实际问题。特别是,建议未来研究将其应用于橡胶涂层辊,这有望降低工具损坏和颗粒条纹的风险。

英文摘要:

Spreading of fine (D50 <=20um) powders into thin layers typically requires a mechanism such as a roller to overcome the cohesive forces between particles. Roller-based spreading requires careful optimization and can result in low density and/or inconsistent layers depending on the characteristics of the powder feedstock. Here, we explore improved, roller-based spreading strategies for highly cohesive powders using an integrated discrete element-finite element (DEM-FEM) framework. Powder characteristics are emulated using a self-similarity approach based on experimental calibration for a Ti-6Al-4V 0-20um powder. We find that optimal roller-based spreading relies on a combination of surface friction of the roller and roller kinematics that impart sufficient kinetic energy to break cohesive bonds between powder particles. However, excess rotation can impart excessive kinetic energy, causing ejection of particles and a non-uniform layer. Interestingly, the identified optimal surface velocities for counter-rotation as well as rotational oscillation are very similar, suggesting this quantity as the critical kinematic parameter. When these conditions are chosen appropriately, layers with packing fractions beyond 50% are predicted for layer thicknesses as small as ~2 times D90 of the exemplary powder, and the layer quality is robust with respect to substrate adhesion over a 10-fold range. The latter is an important consideration given the spatially varying substrate conditions in AM due to the combination of fused/bound and bare powder regions. As compared to counter-rotation, the proposed rotational oscillation is particularly attractive because it can overcome practical issues with mechanical runout of roller mechanisms. In particular, the application to rubber-coated rollers, which promises to reduce the risk of tool damage and particle streaking, is recommended for future investigation.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑