采用DOB/CDOB补偿的离散时间鲁棒PD控制系统用于高速自动驾驶车辆路径跟随
Discrete-time Robust PD Controlled System with DOB/CDOB Compensation for High Speed Autonomous Vehicle Path Following
AI总结:
针对高速自动驾驶车辆路径跟随中的参数不确定性、外部扰动及CAN总线时延,本文提出直接离散时间设计的鲁棒PD控制,并嵌入DOB与CDOB补偿,仿真验证了性能提升。
摘要:
自动驾驶车辆的路径跟随性能是重要考量之一。本文提出了带有扰动观测器(DOB)和通信扰动观测器(CDOB)补偿的鲁棒PD控制系统的离散时间设计,以提升自动驾驶车辆的路径跟随性能。尽管DOB和CDOB结构总是在数字设备上实现,但在文献以及我们此前的工作中,它们通常采用连续时间设计。然而,若使用快速控制器原型系统将连续时间设计框图自动转换为相应的离散时间控制器,则需要很高的采样率。本文开展了直接离散时间设计。基于所提出的参数空间方法,根据标称对象设计了数字PD反馈控制器。采用零阶保持方法对标称对象以及连续域中的DOB和CDOB结构进行离散化。离散时间DOB被嵌入从转向到路径跟随误差的回路中,用于在车辆质量、车速和路面—轮胎摩擦系数等车辆参数存在不确定性时进行模型调节,并抑制侧风力等外部扰动。另一方面,来自基于CAN总线的传感器和执行器指令接口的时间延迟会导致系统性能下降,因为较大的负相位角被加入到对象频率响应中。离散时间CDOB补偿控制系统可用于时间延迟补偿,且无需准确获知延迟时间值。仿真分析使用了本实验室经过验证的Ford Fusion混合动力自动驾驶研究车辆模型,且车辆处于高速行驶状态。仿真结果成功证明了所提出的离散时间DOB和CDOB结构对自动驾驶车辆路径跟随性能的改善。
英文摘要:
Autonomous vehicle path following performance is one of significant consideration. This paper presents discrete time design of robust PD controlled system with disturbance observer (DOB) and communication disturbance observer (CDOB) compensation to enhance autonomous vehicle path following performance. Although always implemented on digital devices, DOB and CDOB structure are usually designed in continuous time in the literature and also in our previous work. However, it requires high sampling rate for continuous-time design block diagram to automatically convert to corresponding discrete-time controller using rapid controller prototyping systems. In this paper, direct discrete time design is carried out. Digital PD feedback controller is designed based on the nominal plant using the proposed parameter space approach. Zero order hold method is applied to discretize the nominal plant, DOB and CDOB structure in continuous domain. Discrete time DOB is embedded into the steering to path following error loop for model regulation in the presence of uncertainty in vehicle parameters such as vehicle mass, vehicle speed and road-tire friction coefficient and rejecting external disturbance like crosswind force. On the other hand, time delay from CAN bus based sensor and actuator command interfaces results in degradation of system performance since large negative phase angles are added to the plant frequency response. Discrete time CDOB compensated control system can be used for time delay compensation where the accurate knowledge of delay time value is not necessary. A validated model of our lab Ford Fusion hybrid automated driving research vehicle is used for the simulation analysis while the vehicle is driving at high speed. Simulation results successfully demonstrate the improvement of autonomous vehicle path following performance with the proposed discrete time DOB and CDOB structure.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。