利用远程Pt缓冲生长实现高速PZT-on-SOI电光调制器的三维极化与驱动机制
3-D poling and drive mechanism for high-speed PZT-on-SOI Electro-Optic modulator using remote Pt buffered growth
AI总结:
本文提出通过图案化Pt层和优化PZT生长工艺实现任意方向极化,在Si基MZI上取得304 pm/V直流光谱偏移和0.6 V-cm的VπLπ,并实现45 GHz外推带宽,为钙钛矿电光调制器树立了新的性能标杆。
摘要:
在这项工作中,我们展示了一种新方法,通过优化以金属(Ti/Pt)为基底材料的PZT生长方法以及PZT极化架构,来增强C波段强度调制器中的电光相互作用。这里,我们使用图案化的Pt层代替缓冲层来进行PZT沉积。通过优化PZT生长工艺,我们能够对制备的PZT薄膜进行任意方向的极化,并实现了增强的电光相互作用,在Si基MZI上获得了304 pm/V的直流光谱偏移和0.6 V-cm的VπLπ值。对于电光调制器,我们报告了使用钙钛矿作为活性材料所取得的最佳直流光谱偏移和VπLπ值。高速测量得到了受限于测试工具的>12 GHz带宽。利用调制深度斜率计算得到的外推带宽为45 GHz。我们还通过仿真展示了4.5 μm的最优间隙和1 μm的PZT厚度,使我们获得低于1 V-dB的性能。
英文摘要:
In this work, we have demonstrated a novel method to increase the electro-optic interaction in an intensity modulator at the C-band by optimizing the growth methodology of PZT with the metal (Ti/Pt) as a base material and the PZT poling architecture. Here, we have used a patterned Pt layer for PZT deposition instead of a buffer layer. By optimizing the PZT growth process, we have been able to do poling of the fabricated PZT film in an arbitrary direction as well as have achieved an enhanced electro-optic interaction, leading to a DC spectrum shift of 304 pm/V and a Vπ Lπ value of 0.6 V-cm on a Si-based MZI. For an electro-optic modulator, we are reporting the best values of DC spectrum shift and Vπ Lπ using perovskite as an active material. The high-speed measurement has yielded a tool-limited bandwidth of > 12GHz. The extrapolated bandwidth calculated using the slope of the modulation depth is 45 GHz. We also show via simulation an optimized gap of 4.5 μm and a PZT thickness of 1 μm that gives us a less than 1 V-dB.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。