基于半导体聚合物PEDOT的电活性伪三层结构弯曲建模
Modeling of the bending of an electroactive pseudo trilayer based on PEDOT, a semiconductor polymer
AI总结:
针对基于半导体聚合物PEDOT的电活性伪三层结构,建立连续介质模型,推导本构方程并数值求解,预测弯曲行为,与实验数据吻合。
摘要:
电活性聚合物(EAP)是一种智能材料,可在许多领域用作致动器、传感器或能量采集器。我们此前研究了一种离子金属-聚合物复合材料(IPMC),它由离子聚合物薄膜(如饱和水的Nafion)构成,并在两侧涂覆薄层金属作为电极。该系统在受到垂直于薄膜的电场作用时会发生弯曲,因此可用作致动器。反之,薄膜的偏转会在电极之间产生电势差;因此同一系统也可用作传感器。我们已为此系统开发了一个“连续介质”模型。线性不可逆过程热力学使我们能够建立其本构方程。我们目前关注一种基于PEDOT(一种半导体EAP)的具有相近特性的系统。该器件的中心部分由两种互穿聚合物组成,充当离子储层。PEDOT在两侧聚合,并与另外两种聚合物形成互穿网络。由此获得一个伪三层结构,其中含有PEDOT的两个外层充当电极。随后用离子液体使其饱和。当如此获得的叶片被置于垂直于其表面的电场中时,PEDOT在负电极一侧发生还原反应(或去掺杂),该反应吸引来自中心部分的阳离子,从而导致该侧膨胀;叶片最终向正电极方向弯曲。我们首先将我们的模型适配到这一双组分系统:一方面为阳离子,另一方面为三种聚合物和阴离子。我们首先在微观尺度上对每一相写出其平衡方程和热力学关系,然后利用平均化技术在宏观尺度上对整个材料写出这些方程和关系。线性不可逆过程热力学随后提供了其本构关系:Kelvin-Voigt型应力-应变关系以及广义傅里叶定律和达西定律。所获得的方程被应用于悬臂叶片在恒定温度下承受连续电势差的情形。方程组的数值求解使我们能够绘制各物理量的分布曲线,这些量在电极附近变化非常陡峭。我们还评估了尖端位移以及为防止梁自由端位移而必须施加的力(即阻塞力)。所得结果与文献中发表的实验数据吻合良好。
英文摘要:
Electroactive polymers (EAP) are smart materials that can be used as actuators, sensors or energy harvesters in many fields. We had previously studied an ionic metal-polymer composites (IPMC), which consists in an ionic polymer film such as Nafion saturated with water and coated on both sides with a thin layer of metal acting as electrodes. This system bends when it is subject to an electric field orthogonal to the film and can thus be used as an actuator. Conversely, the deflection of the film generates a potential difference between the electrodes ; the same system can therefore be used as a sensor.We have developed a ''continuous medium'' model for this system. The thermodynamics of linear irreversible processes had enabled us to establish its constitutive equations.We are currently interested in a system of close properties based on PEDOT, a semiconductor EAP. The central part of the device consists in two interpenetrating polymers playing the role of an ions reservoir. The PEDOT is polymerized on each side and forms an interpenetrating network with the two other polymers. A pseudo trilayer is obtained, the two outer layers containing the PEDOT acting as electrodes. It is then saturated with an ionic liquid. When the blade thus obtained is placed in an electric field orthogonal to its faces, the PEDOT undergoes a reduction reaction (or dedoping) on the side of the negative electrode, which attracts cations from the central part and therefore swells ; the blade ultimately bends towards the positive electrode.We have first adapted our model to this two-components system : the cations on the one hand, and the three polymers and the anions on the other hand. We have written its balance equations and thermodynamic relations first at the microscopic scale for each phase, then at the macroscopic scale for the whole material using an averaging technique. The thermodynamics of linear irreversible processes then provides its constitutive relations : a Kelvin - Voigt type stress-strain relation and generalized Fourier's and Darcy's laws. The equations obtained were applied to the case of a cantilevered blade subject to a continuous potential difference at constant temperature. The numerical resolution of the equations system enabled us to draw the profiles of the different quantities, which are very steep functions near the electrodes. We also evaluated the tip displacement and the force that must be exerted on the free end of the beam to prevent its displacement (blocking force). The results obtained are in good agreement with the experimental data published in the literature.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。