断裂相场方法中加压裂纹建模的公式研究
On Formulations for Modeling Pressurized Cracks Within Phase-Field Methods for Fracture
AI总结:
本研究比较了相场断裂模型中多种加压裂纹公式,提出一种新公式,通过修改试验空间或新泛函导出,并用J积分分析验证其在一维内聚裂纹、稳态扩展及加压成核中的优势。
摘要:
在过去的几十年里,断裂相场方法因其能够正则化尖锐裂纹几何形状所带来的诸多优势而受到广泛欢迎。在此过程中,人们开发了多种不同的模型来考虑裂纹面上的压力载荷效应。本研究考察了这些模型的性能,并将它们与一种相对较新的用于纳入裂纹面压力载荷的公式进行了比较。研究表明,新公式既可以通过在传统变分原理中修改试验空间来获得,也可以通过假设一个新的依赖于主变量变化率的泛函来得到。本文重点阐述了新公式与相场框架下现有加压裂纹模型之间的关键差异。随后,利用基于新公式和现有模型的离散化版本进行的模型仿真,展示了新公式的优势及差异。为了分析结果,针对承受压力载荷的弥散裂纹,推导了一种域形式的J积分。文中给出了关于一维内聚裂纹、稳态裂纹扩展以及加压封闭体引发裂纹成核的结果。
英文摘要:
Over the past few decades, the phase-field method for fracture has seen widespread appeal due to the many benefits associated with its ability to regularize a sharp crack geometry. Along the way, several different models for including the effects of pressure loads on the crack faces have been developed. This work investigates the performance of these models and compares them to a relatively new formulation for incorporating crack-face pressure loads. It is shown how the new formulation can be obtained either by modifying the trial space in the traditional variational principle or by postulating a new functional that is dependent on the rates of the primary variables. The key differences between the new formulation and existing models for pressurized cracks in a phase-field setting are highlighted. Model-based simulations developed with discretized versions of the new formulation and existing models are then used to illustrate the advantages and differences. In order to analyze the results, a domain form of the J-integral is developed for diffuse cracks subjected to pressure loads. Results are presented for a one-dimensional cohesive crack, steady crack growth, and crack nucleation from a pressurized enclosure.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。