arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2304.08658physics.app-phcs.LG
收藏

基于多模态传感器融合的DED(定向能量沉积)打印SS316L零件表面孔隙率原位预测

In-situ surface porosity prediction in DED (directed energy deposition) printed SS316L parts using multimodal sensor fusion

Texas A&M University(德克萨斯A&M大学)

Adithyaa Karthikeyan, Himanshu Balhara, Abhishek Hanchate, Andreas K Lianos, Satish TS Bukkapatnam

AI总结:

本研究针对DED打印SS316L零件的孔隙检测问题,采用多模态传感器融合与LIME可解释AI方法,结合深度卷积网络实现体素级孔隙实时预测,准确率达87%,并揭示了两类孔隙形成路径的AE信号特征。

摘要:

本研究旨在将混合定向能量沉积(DED)过程中采集的声发射(AE)时频模式及其他多模态传感器数据,与高空间分辨率(0.5 mm)和时间分辨率(<1ms)下的孔隙形成关联起来。研究采用可解释AI方法LIME(局部可解释模型-不可知解释,Local Interpretable Model-Agnostic Explanations),将AE的特定高频波形特征与DED过程中孔隙形成的两大主要路径相关联,即飞溅事件以及低热输入导致的相邻打印道之间熔合不足。该方法为实时预测每个体素(尺寸0.5 mm)打印过程中是否存在孔隙提供了令人振奋的可能,相比已有研究实现了重大突破。\n研究在打印SS316L材料试样并随后进行机加工的过程中,采集了包括力、AE、振动和温度在内的同步多模态传感器数据。研究采用深度卷积神经网络分类器,基于工艺链过程中采集的传感器数据时频模式(频谱图),识别体素表面是否存在孔隙。结果表明,与机加工阶段采集的信号相比,DED过程中采集的信号对体素孔隙的检测更敏感(分类测试准确率达87%)。\nLIME分析得出的底层解释显示,含孔隙体素的高频AE波形捕获的能量低33%,这表明熔池内激光-材料相互作用相对较弱,进而导致相邻打印道之间熔合不足且重叠度较差。打印过程中飞溅事件频发的含孔隙体素,其高频AE频段内的能量含量比其他含孔隙体素高约27%。这些AE信号特征可进一步深化对飞溅和熔合不足导致孔隙形成机制的理解。

英文摘要:

This study aims to relate the time-frequency patterns of acoustic emission (AE) and other multi-modal sensor data collected in a hybrid directed energy deposition (DED) process to the pore formations at high spatial (0.5 mm) and time (< 1ms) resolutions. Adapting an explainable AI method in LIME (Local Interpretable Model-Agnostic Explanations), certain high-frequency waveform signatures of AE are to be attributed to two major pathways for pore formation in a DED process, namely, spatter events and insufficient fusion between adjacent printing tracks from low heat input. This approach opens an exciting possibility to predict, in real-time, the presence of a pore in every voxel (0.5 mm in size) as they are printed, a major leap forward compared to prior efforts. Synchronized multimodal sensor data including force, AE, vibration and temperature were gathered while an SS316L material sample was printed and subsequently machined. A deep convolution neural network classifier was used to identify the presence of pores on a voxel surface based on time-frequency patterns (spectrograms) of the sensor data collected during the process chain. The results suggest signals collected during DED were more sensitive compared to those from machining for detecting porosity in voxels (classification test accuracy of 87%). The underlying explanations drawn from LIME analysis suggests that energy captured in high frequency AE waveforms are 33% lower for porous voxels indicating a relatively lower laser-material interaction in the melt pool, and hence insufficient fusion and poor overlap between adjacent printing tracks. The porous voxels for which spatter events were prevalent during printing had about 27% higher energy contents in the high frequency AE band compared to other porous voxels. These signatures from AE signal can further the understanding of pore formation from spatter and insufficient fusion.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑