多晶Fe$_2$Al$_{1.15-x}$B$_2$Ge$_x$Ga$_x$($x=0, 0.05$)MAB相的反应式单步热压及磁热性能
Reactive single-step hot-pressing and magnetocaloric performance of polycrystalline Fe$_2$Al$_{1.15-x}$B$_2$Ge$_x$Ga$_x$ ($x=0, 0.05$) MAB phases
AI总结:
本研究通过反应式单步热压制备近单相铁基MAB相磁热材料,Ge/Ga掺杂可调控其磁性能,提升磁热效应,该方法更易规模化,为室温低成本磁制冷应用提供了有潜力的材料方案。
摘要:
在1473 K、35 MPa条件下进行4小时的反应式单步热压,可制备出致密、块体、近单相、低成本且低临界性的Fe$_2$Al$_{1.15}$B$_2$和Fe$_2$Al$_{1.1}$B$_2$Ge$_{0.05}$Ga$_{0.05}$ MAB样品,这些样品在室温附近表现出二级磁相变,具备良好的磁热性能。Ge和Ga掺杂可调控其磁性与磁热性能,使居里温度$T_C$和自发磁化强度$m_S$升高。热压制备的Fe$_2$Al$_{1.15}$B$_2$在2 T和5 T的磁场变化下,最大等温熵变$Δs_{T,max}$在287.5 K时分别达到2.5和5 J(kgK)$^{-1}$;添加Ge和Ga后,该值在306.5 K时分别提升至3.1和6.2 J(kgK)$^{-1}$。成分改性后,直接测量的最大绝热温度变化$ΔT_{ad,max}$在1.93 T的磁场变化下从0.9 K提升至1.1 K。总体而言,我们证明与传统合成路线相比,热压法为制备磁制冷设备用换热器提供了一种更快速、更易规模化且降低加工成本的替代方案。因此,我们的临界性评估表明,热压铁基MAB相在材料与加工成本、临界性和磁热性能之间实现了颇具前景的平衡,展现出在室温附近低成本、低临界性磁热应用中的潜力。
英文摘要:
Reactive single-step hot-pressing at 1473 K and 35 MPa for 4 h produces dense, bulk, near single-phase, low-cost and low-criticality Fe$_2$Al$_{1.15}$B$_2$ and Fe$_2$Al$_{1.1}$B$_2$Ge$_{0.05}$Ga$_{0.05}$ MAB samples, showing a second-order magnetic phase transition with favorable magnetocaloric properties around room temperature. The magnetic as well as magnetocaloric properties can be tailored upon Ge and Ga doping, leading to an increase of Curie temperature $T_C$ and spontaneous magnetization $m_S$. The maximum isothermal entropy change $Δs_{T,max}$ of hot-pressed Fe$_2$Al$_{1.15}$B$_2$ in magnetic field changes of 2 and 5 T amounts to 2.5 and 5 J(kgK)$^{-1}$ at 287.5 K and increases by Ge and Ga addition to 3.1 and 6.2 J(kgK)$^{-1}$ at 306.5 K, respectively. The directly measured maximum adiabatic temperature change $ΔT_{ad,max}$ is improved by the composition modification from 0.9 to 1.1 K in magnetic field changes of 1.93 T. Overall, we demonstrate that hot-pressing provides a much faster, more scalable and processing cost reducing alternative compared to conventional synthesis routes to produce heat exchangers for magnetic cooling devices. Therefore, our criticality assessment shows that hot-pressed Fe-based MAB phases provide a promising compromise of material and processing cost, criticality and magnetocaloric performance, demonstrating the potential for low-cost and low-criticality magnetocaloric applications around room temperature.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。