传感器灵敏度故障下洗涤塔装置的容错控制设计
Fault-Tolerant Control Design in Scrubber Plant with Fault on Sensor Sensitivity
AI总结:
针对洗涤塔装置的传感器灵敏度故障,提出含观测器的容错控制方法,基于印尼公司真实数据建模,仿真验证70%和85%灵敏度缺失场景下系统可跟踪设定点,优于仅PI控制器的方案。
摘要:
容错控制的概念已通过多种发展路径得到广泛探索,涵盖系统特性、控制器鲁棒性、估计方法与优化,以及故障组合等方面,以贴合真实观测系统。本文提出了考虑压力参数、传感元件和执行器的洗涤塔装置数学模型,设计数据来源于印尼某公司的真实值。仿真结果表明,开环和闭环系统的性能与实际结果一致。此外,本文提出观测器以估计状态$(\hat{x})$和$(\hat{f}_s)$,在残差故障设定点上呈现积极轨迹,随后针对传感器灵敏度故障设计容错控制。实验场景设定传感器灵敏度缺失为70%和85%,并与无容错控制(仅PI控制器)的系统对比。结果显示,带容错控制的系统可应对这些传感器故障场景,而无容错控制的系统则无法跟踪设定点,表现出故障状态。最后一节还提及了与本文相关的后续项目。
英文摘要:
The concept of fault-tolerant control has extensively been explored with various mapping of development. It starts from the system characteristic, the robustness of the controller, estimation methods and optimization, to the combination of the faults such that it can touch the true observed system. The mathematical concepts of the scrubber plant taking into account the pressure parameter along with sensing element and actuator are proposed. The data to construct the designs derive from the true values in one of Indonesian company. The performances coming from the simulations depict that the open- and closed-loop system could be the same as those of the real results. Furthermore, the observer is proposed to give the estimates of the states of $(\hat{x})$ and $(\hat{f}_s)$ showing the positive trace on the set-point of the residual fault followed by designing the fault-tolerant control with sensor fault on sensitivity. The scenarios are to give the lack of reading in sensor with $70\%$ and $85\%$ sensitivity and those are contrasted to the system without FTC (only PI controller). The yields portray that the system with FTC could deal with those sensor fault scenarios while its counterpart cannot drawing the faulty performance instead of tracking the set-point. The next project associated with this paper is also mentioned in the last section.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。