Small object detection requires the detection head to scan a large number of positions on image feature maps, which is extremely hard for computation- and energy-efficient lightweight generic detectors. To accurately detect small objects with limited computation, we propose a two-stage lightweight detection framework with extremely low computation complexity, termed as TinyDet. It enables high-resolution feature maps for dense anchoring to better cover small objects, proposes a sparsely-connected convolution for computation reduction, enhances the early stage features in the backbone, and addresses the feature misalignment problem for accurate small object detection. On the COCO benchmark, our TinyDet-M achieves 30.3 AP and 13.5 AP^s with only 991 MFLOPs, which is the first detector that has an AP over 30 with less than 1 GFLOPs; besides, TinyDet-S and TinyDet-L achieve promising performance under different computation limitation.
National Central University（中央大学）；National Chiao Tung University（交通大学）
The development of lightweight object detectors is essential due to the limited computation resources. To reduce the computation cost, how to generate redundant features plays a significant role. This paper proposes a new lightweight Convolution method Cross-Stage Lightweight (CSL) Module, to generate redundant features from cheap operations. In the intermediate expansion stage, we replaced Pointwise Convolution with Depthwise Convolution to produce candidate features. The proposed CSL-Module can reduce the computation cost significantly. Experiments conducted at MS-COCO show that the proposed…
College of Electronics and Information Engineering, Sichuan University（四川大学电子信息工程学院）；School of Mechanical Engineering and Automation, Fuzhou University（福州大学机械工程与自动化学院）；Yunnan Key Laboratory of Software Engineering, Yunnan University（云南大学云南省软件工程重点实验室）
LTV-YOLO: A Lightweight Thermal Object Detector for Young Pedestrians in Adverse Conditions
Automotive and Surface Transportation National Research Council Canada（交通运输国家研究院加拿大）；Department of Civil and Environmental Engineering University of Western Ontario（土木与环境工程系温哥华大学）
National University of Defense Technology（国防科技大学）；Megvii Inc. (Face++)（旷视科技（Face++））
Real-time generic object detection on mobile platforms is a crucial but challenging computer vision task. However, previous CNN-based detectors suffer from enormous computational cost, which hinders them from real-time inference in computation-constrained scenarios. In this paper, we investigate the effectiveness of two-stage detectors in real-time generic detection and propose a lightweight two-stage detector named ThunderNet. In the backbone part, we analyze the drawbacks in previous lightweight backbones and present a lightweight backbone designed for object detection. In the detection part…
Tencent TEG AI（腾讯技术工程事业群人工智能）；The Hong Kong University of Science and Technology（香港科技大学）
Previous state-of-the-art real-time object detectors have been reported on GPUs which are extremely expensive for processing massive data and in resource-restricted scenarios. Therefore, high efficiency object detectors on CPU-only devices are urgently-needed in industry. The floating-point operations (FLOPs) of networks are not strictly proportional to the running speed on CPU devices, which inspires the design of an exactly "fast" and "accurate" object detector. After investigating the concern gaps between classification networks and detection backbones, and following the design principles o…
To achieve lightweight object detectors for deployment on the edge devices, an effective model compression pipeline is proposed in this paper. The compression pipeline consists of automatic channel pruning for the backbone, fixed channel deletion for the branch layers and knowledge distillation for the guidance learning. As results, the Resnet50-v1d is auto-pruned and fine-tuned on ImageNet to attain a compact base model as the backbone of object detector. Then, lightweight object detectors are implemented with proposed compression pipeline. For instance, the SSD-300 with model size=16.3MB, FL…
Nanjing University of Posts & Telecommunications（南京邮电大学）；Temple University（天普大学）
The recent advances of compressing high-accuracy convolution neural networks (CNNs) have witnessed remarkable progress for real-time object detection. To accelerate detection speed, lightweight detectors always have few convolution layers using single-path backbone. Single-path architecture, however, involves continuous pooling and downsampling operations, always resulting in coarse and inaccurate feature maps that are disadvantageous to locate objects. On the other hand, due to limited network capacity, recent lightweight networks are often weak in representing large scale visual data. To add…
College of Computing, Yonsei University（延世大学计算学院）；CLOVA ImageVision, NAVER（NAVER CLOVA图像视觉部门）
This work is for designing one-stage lightweight detectors which perform well in terms of mAP and latency. With baseline models each of which targets on GPU and CPU respectively, various operations are applied instead of the main operations in backbone networks of baseline models. In addition to experiments about backbone networks and operations, several feature pyramid network (FPN) architectures are investigated. Benchmarks and proposed detectors are analyzed in terms of the number of parameters, Gflops, GPU latency, CPU latency and mAP, on MS COCO dataset which is a benchmark dataset in obj…
Beijing Advanced Innovation Center for Big Data and Brain Computing（北京大数据与脑计算高精尖创新中心）；Beihang University（北京航空航天大学）
Current top-performing object detectors depend on deep CNN backbones, such as ResNet-101 and Inception, benefiting from their powerful feature representations but suffering from high computational costs. Conversely, some lightweight model based detectors fulfil real time processing, while their accuracies are often criticized. In this paper, we explore an alternative to build a fast and accurate detector by strengthening lightweight features using a hand-crafted mechanism. Inspired by the structure of Receptive Fields (RFs) in human visual systems, we propose a novel RF Block (RFB) module, whi…
The better accuracy and efficiency trade-off has been a challenging problem in object detection. In this work, we are dedicated to studying key optimizations and neural network architecture choices for object detection to improve accuracy and efficiency. We investigate the applicability of the anchor-free strategy on lightweight object detection models. We enhance the backbone structure and design the lightweight structure of the neck, which improves the feature extraction ability of the network. We improve label assignment strategy and loss function to make training more stable and efficient.…
ExDet: Open-Domain Open-Vocabulary Detection with Cross-modal Extrapolation and Rectification
College of Intelligence and Computing, Tianjin University（天津大学智能与计算学部）；Faculty of Computer Science and Artificial Intelligence, Shenzhen University of Advanced Technology（深圳理工大学计算机科学与人工智能学院）；School of Artificial Intelligence, Nanchang University（南昌大学人工智能学院）
We develop a probabilistic interpretation of two-stage object detection. We show that this probabilistic interpretation motivates a number of common empirical training practices. It also suggests changes to two-stage detection pipelines. Specifically, the first stage should infer proper object-vs-background likelihoods, which should then inform the overall score of the detector. A standard region proposal network (RPN) cannot infer this likelihood sufficiently well, but many one-stage detectors can. We show how to build a probabilistic two-stage detector from any state-of-the-art one-stage det…
Beijing Institute of Technology（北京理工大学）；University of Delaware（特拉华大学）；The Aviation Industry Corporation of China, Ltd.（中国航空工业集团有限公司）；Luoyang Institute of Electro-Optical Equipment（洛阳电光设备研究所）
A few lightweight convolutional neural network (CNN) models have been recently designed for remote sensing object detection (RSOD). However, most of them simply replace vanilla convolutions with stacked separable convolutions, which may not be efficient due to a lot of precision losses and may not be able to detect oriented bounding boxes (OBB). Also, the existing OBB detection methods are difficult to constrain the shape of objects predicted by CNNs accurately. In this paper, we propose an effective lightweight oriented object detector (LO-Det). Specifically, a channel separation-aggregation …
Object detection is the identification of an object in the image along with its localisation and classification. It has wide spread applications and is a critical component for vision based software systems. This paper seeks to perform a rigorous survey of modern object detection algorithms that use deep learning. As part of the survey, the topics explored include various algorithms, quality metrics, speed/size trade offs and training methodologies. This paper focuses on the two types of object detection algorithms- the SSD class of single step detectors and the Faster R-CNN class of two step …
Nanjing University of Science and Technology（南京理工大学）
This paper presents a modular lightweight network model for road objects detection, such as car, pedestrian and cyclist, especially when they are far away from the camera and their sizes are small. Great advances have been made for the deep networks, but small objects detection is still a challenging task. In order to solve this problem, majority of existing methods utilize complicated network or bigger image size, which generally leads to higher computation cost. The proposed network model is referred to as modular feature fusion detector (MFFD), using a fast and efficient network architectur…
Existing single-stage detectors for locating objects in point clouds often treat object localization and category classification as separate tasks, so the localization accuracy and classification confidence may not well align. To address this issue, we present a new single-stage detector named the Confident IoU-Aware Single-Stage object Detector (CIA-SSD). First, we design the lightweight Spatial-Semantic Feature Aggregation module to adaptively fuse high-level abstract semantic features and low-level spatial features for accurate predictions of bounding boxes and classification confidence. Al…
University of the Balearic Islands（巴利阿里群岛大学）；Health Research Institute of the Balearic Islands（巴利阿里群岛健康研究所）
Following the success of machine vision systems for on-line automated quality control and inspection processes, an object recognition solution is presented in this work for two different specific applications, i.e., the detection of quality control items in surgery toolboxes prepared for sterilizing in a hospital, as well as the detection of defects in vessel hulls to prevent potential structural failures. The solution has two stages. First, a feature pyramid architecture based on Single Shot MultiBox Detector (SSD) is used to improve the detection performance, and a statistical analysis based…
Technische Universität München（慕尼黑工业大学）；Tongji University（同济大学）；University of Science and Technology of China（中国科学技术大学）；Fortiss Research Institute（Fortiss研究院）
The method of deep learning has achieved excellent results in improving the performance of robotic grasping detection. However, the deep learning methods used in general object detection are not suitable for robotic grasping detection. Current modern object detectors are difficult to strike a balance between high accuracy and fast inference speed. In this paper, we present an efficient and robust fully convolutional neural network model to perform robotic grasping pose estimation from an n-channel input image of the real grasping scene. The proposed network is a lightweight generative architec…
Beihang University（北京航空航天大学）；SenseTime Research（商汤科技研究院）；ETH Zurich（苏黎世联邦理工学院）；Shandong University（山东大学）；University of Science and Technology of China（中国科学技术大学）
Conventional knowledge distillation (KD) methods for object detection mainly concentrate on homogeneous teacher-student detectors. However, the design of a lightweight detector for deployment is often significantly different from a high-capacity detector. Thus, we investigate KD among heterogeneous teacher-student pairs for a wide application. We observe that the core difficulty for heterogeneous KD (hetero-KD) is the significant semantic gap between the backbone features of heterogeneous detectors due to the different optimization manners. Conventional homogeneous KD (homo-KD) methods suffer …
Binghamton University, SUNY（纽约州立大学宾汉姆顿分校）；University of Missouri-Kansas City（密苏里大学堪萨斯城分校）；New York State University Police（纽约州立大学警察局）
Edge computing allows more computing tasks to take place on the decentralized nodes at the edge of networks. Today many delay sensitive, mission-critical applications can leverage these edge devices to reduce the time delay or even to enable real time, online decision making thanks to their onsite presence. Human objects detection, behavior recognition and prediction in smart surveillance fall into that category, where a transition of a huge volume of video streaming data can take valuable time and place heavy pressure on communication networks. It is widely recognized that video processing an…
The Chinese University of Hong Kong（香港中文大学）；The Hong Kong University of Science and Technology（香港科技大学）
Currently, there have been many kinds of voxel-based 3D single stage detectors, while point-based single stage methods are still underexplored. In this paper, we first present a lightweight and effective point-based 3D single stage object detector, named 3DSSD, achieving a good balance between accuracy and efficiency. In this paradigm, all upsampling layers and refinement stage, which are indispensable in all existing point-based methods, are abandoned to reduce the large computation cost. We novelly propose a fusion sampling strategy in downsampling process to make detection on less represent…
3D object detection based on point clouds has become more and more popular. Some methods propose localizing 3D objects directly from raw point clouds to avoid information loss. However, these methods come with complex structures and significant computational overhead, limiting its broader application in real-time scenarios. Some methods choose to transform the point cloud data into compact tensors first and leverage off-the-shelf 2D detectors to propose 3D objects, which is much faster and achieves state-of-the-art results. However, because of the inconsistency between 2D and 3D data, we argue…
Iris Recognition (IR) is one of the market's most reliable and accurate biometric systems. Today, it is challenging to build NIR-capturing devices under the premise of hardware price reduction. Commercial NIR sensors are protected from modification. The process of building a new device is not trivial because it is required to start from scratch with the process of capturing images with quality, calibrating operational distances, and building lightweight software such as eyes/iris detectors and segmentation sub-systems. In light of such challenges, this work aims to develop and implement iris r…
Hikvision Research Institute（海康威视研究院）；Shanghai Jiao Tong University（上海交通大学）
Knowledge distillation learns a lightweight student model that mimics a cumbersome teacher. Existing methods regard the knowledge as the feature of each instance or their relations, which is the instance-level knowledge only from the teacher model, i.e., the local knowledge. However, the empirical studies show that the local knowledge is much noisy in object detection tasks, especially on the blurred, occluded, or small instances. Thus, a more intrinsic approach is to measure the representations of instances w.r.t. a group of common basis vectors in the two feature spaces of the teacher and th…
Oxford Robotics Institute, Department of Engineering Science, University of Oxford（牛津大学工程科学系牛津机器人研究所）
This paper is about enabling robots to improve their perceptual performance through repeated use in their operating environment, creating local expert detectors fitted to the places through which a robot moves. We leverage the concept of 'experiences' in visual perception for robotics, accounting for bias in the data a robot sees by fitting object detector models to a particular place. The key question we seek to answer in this paper is simply: how do we define a place? We build bespoke pedestrian detector models for autonomous driving, highlighting the necessary trade off between generalisati…
University of Freiburg（弗莱堡大学）；Toyota Research Institute（丰田研究院）
Real-time object detection in videos using lightweight hardware is a crucial component of many robotic tasks. Detectors using different modalities and with varying computational complexities offer different trade-offs. One option is to have a very lightweight model that can predict from all modalities at once for each frame. However, in some situations (e.g., in static scenes) it might be better to have a more complex but more accurate model and to extrapolate from previous predictions for the frames coming in at processing time. We formulate this task as a sequential decision making problem a…
Object detection is a fundamental problem in computer vision, aiming at locating and classifying objects in image. Although current devices can easily take very high-resolution images, current approaches of object detection seldom consider detecting tiny object or the large scale variance problem in high resolution images. In this paper, we introduce a simple yet efficient approach that improves accuracy of object detection especially for small objects and large scale variance scene while reducing the computational cost in high resolution image. Inspired by observing that overall detection acc…
National Cheng Kung University（国立成功大学）；Academia Sinica & MOST Joint Research Center for AI Technology and All Vista Healthcare（中央研究院与科技部人工智能技术暨全幅健康照护联合研究中心）
It is hard to detect on-road objects under various lighting conditions. To improve the quality of the classifier, three techniques are used. We define subclasses to separate daytime and nighttime samples. Then we skip similar samples in the training set to prevent overfitting. With the help of the outside training samples, the detection accuracy is also improved. To detect objects in an edge device, Nvidia Jetson TX2 platform, we exert the lightweight model ResNet-18 FPN as the backbone feature extractor. The FPN (Feature Pyramid Network) generates good features for detecting objects over vari…
An autonomous system's perception engine must provide an accurate understanding of the environment for it to make decisions. Deep learning based object detection networks experience degradation in the performance and robustness for small and far away objects due to a reduction in object's feature map as we move to higher layers of the network. In this work, we propose a novel radar-guided spatial attention for RGB images to improve the perception quality of autonomous vehicles operating in a dynamic environment. In particular, our method improves the perception of small and long range objects,…
mRadNet: A Compact Radar Object Detector with MetaFormer
School of Electrical Engineering and Computer Science, University of Ottawa, Canada（渥太华大学电气与计算机工程学院，加拿大）；tsensor Cortek Inc., Canada（加拿大tsensor Cortek公司）
