arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2304.02887cs.RO
收藏

具备高敏捷性、极小占地空间和高负载能力的球机器人驱动系统设计与控制

Design and Control of a Ballbot Drivetrain with High Agility, Minimal Footprint, and High Payload

University of Illinois at Urbana-Champaign(伊利诺伊大学厄巴纳-香槟分校);University of Michigan(密歇根大学)

Chenzhang Xiao, Mahshid Mansouri, David Lam, Joao Ramos, Elizabeth T. Hsiao-Wecksler

AI总结:

本文提出球机器人驱动系统MiaPURE的设计与控制方法,通过开发全尺寸原型与降阶试验台,提出鲁棒的LQR-PI控制器克服高静摩擦力,实现了60 kg负载、2.3 m/s最大速度及全向移动,验证了其作为通用移动平台的可行性。

摘要:

本文提出了一种球机器人驱动系统的设计与控制方法,旨在实现高敏捷性、极小占地空间和高负载能力,同时保持动态稳定性。我们开发了两个硬件平台和解析模型来测试设计与控制方法。全尺寸球机器人原型(MiaPURE)采用现成组件构建,其敏捷性、占地空间和平衡能力设计得与步行人类相似。平面倒立摆试验台(PIPTB)被开发为降阶试验台,用于快速验证系统性能。随后,我们提出了一种简单而鲁棒的LQR-PI控制器,用于平衡和操控带有重负载的球机器人驱动系统。这一点至关重要,因为由于扭矩传动系统中的弹性体组件,该驱动系统常受到高静摩擦力的影响。该控制器首先在PIPTB中进行测试,与传统LQR和级联PI-PD控制器进行比较,随后在球机器人驱动系统中实现。MiaPURE驱动系统能够承载60 kg的负载,达到2.3 m/s的最大速度,并在选定的平移方向上于2秒内从1.4 m/s的速度完全停止。最后,我们展示了球机器人驱动系统在室内环境中的全向移动能力,既可作为载物机器人,也可作为载人移动设备。实验证明了利用所提出的设计与控制方法,将球机器人驱动系统作为具备敏捷移动、极小占地空间和高负载能力的通用移动平台的可行性。

英文摘要:

This paper presents the design and control of a ballbot drivetrain that aims to achieve high agility, minimal footprint, and high payload capacity while maintaining dynamic stability. Two hardware platforms and analytical models were developed to test design and control methodologies. The full-scale ballbot prototype (MiaPURE) was constructed using off-the-shelf components and designed to have agility, footprint, and balance similar to that of a walking human. The planar inverted pendulum testbed (PIPTB) was developed as a reduced-order testbed for quick validation of system performance. We then proposed a simple yet robust LQR-PI controller to balance and maneuver the ballbot drivetrain with a heavy payload. This is crucial because the drivetrain is often subject to high stiction due to elastomeric components in the torque transmission system. This controller was first tested in the PIPTB to compare with traditional LQR and cascaded PI-PD controllers, and then implemented in the ballbot drivetrain. The MiaPURE drivetrain was able to carry a payload of 60 kg, achieve a maximum speed of 2.3 m/s, and come to a stop from a speed of 1.4 m/s in 2 seconds in a selected translation direction. Finally, we demonstrated the omnidirectional movement of the ballbot drivetrain in an indoor environment as a payload-carrying robot and a human-riding mobility device. Our experiments demonstrated the feasibility of using the ballbot drivetrain as a universal mobility platform with agile movements, minimal footprint, and high payload capacity using our proposed design and control methodologies.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑