On-chip DNN inference and training at the Extreme-Edge (TinyML) impose strict latency, throughput, accuracy and flexibility requirements. Heterogeneous clusters are promising solutions to meet the challenge, combining the flexibility of DSP-enhanced cores with the performance and energy boost of dedicated accelerators. We present DARKSIDE, a System-on-Chip with a heterogeneous cluster of 8 RISC-V cores enhanced with 2-b to 32-b mixed-precision integer arithmetic. To boost performance and efficiency on key compute-intensive Deep Neural Network (DNN) kernels, the cluster is enriched with three digital accelerators: a specialized engine for low-data-reuse depthwise convolution kernels (up to 30 MAC/cycle); a minimal overhead datamover to marshal 1-b to 32-b data on-the-fly; a 16-b floating point Tensor Product Engine (TPE) for tiled matrix-multiplication acceleration. DARKSIDE is implemented in 65nm CMOS technology. The cluster achieves a peak integer performance of 65 GOPS and a peak efficiency of 835 GOPS/W when working on 2-b integer DNN kernels. When targeting floating-point tensor operations, the TPE provides up to 18.2 GFLOPS of performance or 300 GFLOPS/W of efficiency - enough to enable on-chip floating-point training at competitive speed coupled with ultra-low power quantized inference.
We present a DNN accelerator that allows inference at arbitrary precision with dedicated processing elements that are configurable at the bit level. Our DNN accelerator has 8 Processing Elements controlled by a RISC-V controller with a combined 8.2 TMACs of computational power when implemented with the recent Alveo U250 FPGA platform. We develop a code generator tool that ingests CNN models in ONNX format and generates an executable command stream for the RISC-V controller. We demonstrate the scalable throughput of our accelerator by running different DNN kernels and models when different quan…
In this paper, we present Quark, an integer RISC-V vector processor specifically tailored for sub-byte DNN inference. Quark is implemented in GlobalFoundries' 22FDX FD-SOI technology. It is designed on top of Ara, an open-source 64-bit RISC-V vector processor. To accommodate sub-byte DNN inference, Quark extends Ara by adding specialized vector instructions to perform sub-byte quantized operations. We also remove the floating-point unit from Quarks' lanes and use the CVA6 RISC-V scalar core for the re-scaling operations that are required in quantized neural network inference. This makes each l…
Low bit-width Quantized Neural Networks (QNNs) enable deployment of complex machine learning models on constrained devices such as microcontrollers (MCUs) by reducing their memory footprint. Fine-grained asymmetric quantization (i.e., different bit-widths assigned to weights and activations on a tensor-by-tensor basis) is a particularly interesting scheme to maximize accuracy under a tight memory constraint. However, the lack of sub-byte instruction set architecture (ISA) support in SoA microprocessors makes it hard to fully exploit this extreme quantization paradigm in embedded MCUs. Support …
Optimizing Tensor Train Decomposition in DNNs for RISC-V Architectures Using Design Space Exploration and Compiler Optimizations
School of Informatics, Aristotle University of Thessaloniki（阿尔基托斯大学信息学院）；School of Engineering, Computing and Mathematics, University of Plymouth（普利茅斯大学工程、计算与数学学院）；School of Informatics, Reutlingen University（鲁特林根大学信息学院）
This work introduces lightweight extensions to the RISC-V ISA to boost the efficiency of heavily Quantized Neural Network (QNN) inference on microcontroller-class cores. By extending the ISA with nibble (4-bit) and crumb (2-bit) SIMD instructions, we are able to show near-linear speedup with respect to higher precision integer computation on the key kernels for QNN computation. Also, we propose a custom execution paradigm for SIMD sum-of-dot-product operations, which consists of fusing a dot product with a load operation, with an up to 1.64x peak MAC/cycle improvement compared to a standard ex…
Hardware-Software Co-Design for Float16 On-Device Training on RISC-V Single-Core
CEA-Leti, Mines Saint-Etienne, Equipe Commune SAS（CEA-莱蒂、圣艾蒂安 Mines、共同团队 SAS）；Univ. Grenoble Alpes, CEA-Leti（格勒诺布尔阿尔卑斯大学、CEA-莱蒂）；Mines Saint-Etienne, CEA-Leti, Centre CMP, Equipe commune SAS（圣艾蒂安 Mines、CEA-莱蒂、CMP 中心、共同团队 SAS）
KU Leuven（鲁汶大学）；INESC-ID；Instituto Superior Técnico（高等技术学院）；Universidade de Lisboa（里斯本大学）
Deep neural networks (DNNs) face significant challenges when deployed on resource-constrained extreme edge devices due to their computational and data-intensive nature. While standalone accelerators tailored for specific application scenarios suffer from inflexible control and limited programmability, generic hardware acceleration platforms coupled with RISC-V CPUs can enable high reusability and flexibility, yet typically at the expense of system level efficiency and low utilization. To fill this gap, we propose OpenGeMM, an open-source acceleration platform, jointly demonstrating high effici…
University of Bologna（博洛尼亚大学）；ETH Zurich（苏黎世联邦理工学院）；GreenWaves Technologies
The Internet-of-Things requires end-nodes with ultra-low-power always-on capability for a long battery lifetime, as well as high performance, energy efficiency, and extreme flexibility to deal with complex and fast-evolving near-sensor analytics algorithms (NSAAs). We present Vega, an IoT end-node SoC capable of scaling from a 1.7 $\mathrmμ$W fully retentive cognitive sleep mode up to 32.2 GOPS (@ 49.4 mW) peak performance on NSAAs, including mobile DNN inference, exploiting 1.6 MB of state-retentive SRAM, and 4 MB of non-volatile MRAM. To meet the performance and flexibility requirements of N…
In-Memory Acceleration (IMA) promises major efficiency improvements in deep neural network (DNN) inference, but challenges remain in the integration of IMA within a digital system. We propose a heterogeneous architecture coupling 8 RISC-V cores with an IMA in a shared-memory cluster, analyzing the benefits and trade-offs of in-memory computing on the realistic use case of a MobileNetV2 bottleneck layer. We explore several IMA integration strategies, analyzing performance, area, and energy efficiency. We show that while pointwise layers achieve significant speed-ups over software implementation…
Computationally intensive algorithms such as Deep Neural Networks (DNNs) are becoming killer applications for edge devices. Porting heavily data-parallel algorithms on resource-constrained and battery-powered devices poses several challenges related to memory footprint, computational throughput, and energy efficiency. Low-bitwidth and mixed-precision arithmetic have been proven to be valid strategies for tackling these problems. We present Dustin, a fully programmable compute cluster integrating 16 RISC-V cores capable of 2- to 32-bit arithmetic and all possible mixed-precision permutations. I…
University of Bologna（博洛尼亚大学）；IBM Research Europe（IBM欧洲研究院）；ETH Zurich（苏黎世联邦理工学院）
Deployment of modern TinyML tasks on small battery-constrained IoT devices requires high computational energy efficiency. Analog In-Memory Computing (IMC) using non-volatile memory (NVM) promises major efficiency improvements in deep neural network (DNN) inference and serves as on-chip memory storage for DNN weights. However, IMC's functional flexibility limitations and their impact on performance, energy, and area efficiency are not yet fully understood at the system level. To target practical end-to-end IoT applications, IMC arrays must be enclosed in heterogeneous programmable systems, intr…
