DTT NBI气体注入与真空系统的概念设计
Conceptual design of the Gas Injection and Vacuum System for DTT NBI
AI总结:
本文介绍了DTT NBI气体注入与真空系统的概念设计,该系统由接地和高压两部分并行组成,旨在通过优化配置前级与高真空泵及氘气注入来满足运行要求并提升整体NBI效率。
摘要:
偏滤器托卡马克测试装置(DTT)是一个正在意大利罗马弗拉斯卡蒂开始建设的新实验设施;其主要目标是增进对等离子体与壁相互作用的理解,并支持ITER和DEMO的开发。DTT将配备一个基于负氘离子的中性束注入器(NBI),设计向托卡马克注入10 MW的功率。DTT NBI良好运行的一个基本系统将是其气体注入与真空系统(GVS)。事实上,整个NBI的效率强烈依赖于其GVS的良好性能。DTT NBI的GVS将由两个并行工作的系统组成:一个连接到主真空室的接地部分,以及一个连接到离子源室并在-510 kV电压下工作的高压部分。接地部分将配备前级真空系统(由螺杆泵和罗茨泵提供)加上基于位于真空室侧壁的涡轮分子泵和位于真空室内部上下表面的非蒸发吸气剂(NEG)泵的高真空系统。另一方面,高压部分将配备前级真空系统(由安装在离子源室外部的两个紧凑型螺杆泵提供)加上同样位于离子源室侧壁的涡轮分子泵的高真空系统。一个专门的氘气注入系统将为离子源和中性化器提供工艺气体。本文描述了DTT NBI的GVS的概念设计,以及在考虑DTT NBI的运行要求和其他约束条件下优化该系统所遵循的程序。
英文摘要:
The Divertor Tokamak Test (DTT) is a new experimental facility whose construction is starting in Frascati, Rome, Italy; its main goals are improving the understanding of plasma-wall interactions and supporting the development of ITER and DEMO. DTT will be equipped with a Neutral Beam Injector (NBI) based on negative deuterium ions, designed to inject 10 MW of power to the tokamak. A fundamental system for the good operations of the DTT NBI will be its Gas injection and Vacuum System (GVS). Indeed, the efficiency of the entire NBI strongly depends on the good performance of its GVS. The GVS for DTT NBI will be composed of two systems working in parallel: a grounded section connected to the main vacuum vessel, and a high voltage part connected to the ion source vessel and working at -510 kV voltage. The grounded part will feature a fore vacuum system (given by screw and roots pumps) plus a high vacuum system based on turbo-molecular pumps located on the side walls of the vessel and Non-Evaporable Getter (NEG) pumps located inside the vessel on the upper and lower surfaces. On the other hand, the high voltage part will feature a fore vacuum system (given by two compact screw pumps mounted on the external surface for the ion source vessel) plus a high vacuum system based on turbo-molecular pumps also located on the sidewalls of the ion source vessel. A dedicated deuterium gas injection will feed the process gas to the ion source and the neutralizer. This paper gives a description of the conceptual design of the GVS for DTT NBI, and of the procedure followed to optimize this system considering the operational requirements and the other constraints of the DTT NBI.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。