arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2303.15461physics.ins-detnucl-ex
收藏

超冷中子在波浪形表面上的漫散射模型

A diffuse scattering model of ultracold neutrons on wavy surfaces

S. Imajo, H. Akatsuka, K. Hatanaka, T. Higuchi, G. Ichikawa, S. Kawasaki, M. Kitaguchi, R. Mammei, R. Matsumiya, K. Mishima, R. Picker, W. Schreyer, H. M. Shimizu

AI总结:

针对粗糙度大于5纳米的UCN导向管,提出结合微面元BRDF和朗伯定律的散射模型,在J-PARC实验中验证,能准确评估约10纳米粗糙度管道的输运性能。

摘要:

镀镍磷的金属管因其易于制造而被用于许多使用超冷中子(UCN)的基础物理实验中。这些管子通常被抛光至平均粗糙度为25-150纳米。然而,目前没有散射模型能够准确描述在均方根粗糙度大于5纳米的粗糙导向表面上UCN的散射。因此,我们开发了一个UCN散射模型,其中尺寸大于UCN波长的随机表面波浪引起的散射由微面元双向反射分布函数模型(mf-BRDF模型)描述,而较小结构的散射由朗伯余弦定律(朗伯模型)描述。对于表面波浪,我们使用了原子力显微镜在导向管样品上测量的表面斜率统计分布作为模型输入。该模型用于描述在J-PARC脉冲UCN源进行的UCN透射实验。在这些实验中,一束发散角小于±6°的准直UCN束以斜角射入均方根粗糙度为6.4纳米至17纳米的导向管,并测量了改变入射角时的UCN输运性能及其飞行时间分布。结合朗伯模型(散射概率p_L = 0.039±0.003)的mf-BRDF模型很好地重现了实验结果。因此,我们建立了一套评估表面粗糙度约为10纳米的UCN导向管特性的程序。

英文摘要:

Metal tubes plated with nickel-phosphorus are used in many fundamental physics experiments using ultracold neutrons (UCN) because of their ease of fabrication. These tubes are usually polished to a average roughness of 25-150 nm. However, there is no scattering model that accurately describes UCN scattering on such a rough guide surface with a mean-square roughness larger than 5 nm. We therefore developed a scattering model for UCN in which scattering from random surface waviness with a size larger than the UCN wavelength is described by a microfacet Bidirectional Reflectance Distribution Function model (mf-BRDF model), and scattering from smaller structures by the Lambert's cosine law (Lambert model). For the surface waviness, we used the statistical distribution of surface slope measured by an atomic force microscope on a sample piece of guide tube as input of the model. This model was used to describe UCN transmission experiments conducted at the pulsed UCN source at J-PARC. In these experiments, a UCN beam collimated to a divergence angle smaller than $\pm 6^{\circ}$ was directed into a guide tube with a mean-square roughness of 6.4 nm to 17 nm at an oblique angle, and the UCN transport performance and its time-of-flight distribution were measured while changing the angle of incidence. The mf-BRDF model combined with the Lambert model with scattering probability $p_{L} = 0.039\pm0.003$ reproduced the experimental results well. We have thus established a procedure to evaluate the characteristics of UCN guide tubes with a surface roughness of approximately 10 nm.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑