arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2303.12265cs.ROcs.AI
收藏

用于小鼠颅窗制备的自主机器人钻孔系统:基于鸡蛋模型的评估

Autonomous Robotic Drilling System for Mice Cranial Window Creation: An Evaluation with an Egg Model

the University of Tokyo(东京大学)

Enduo Zhao, Murilo M. Marinho, Kanako Harada

AI总结:

针对生命科学实验样本个体差异大、难以预编程机器人轨迹的问题,提出含轨迹规划与图像识别的自主钻孔方法,用鸡蛋模拟小鼠颅骨实验,20次试验成功率达80%。

摘要:

生命科学领域的实验操作机器人辅助技术有望实现对珍贵样本的精准操作,且不受科研人员操作技能水平的影响。生命科学中的实验样本存在个体差异且易发生形变,因此需要自主机器人控制。作为研究示例,我们正在开展小鼠颅窗植入手术的相关研究。该手术需要移除厚度约300微米的颅骨,将其切割成直径8毫米的圆形,但小鼠颅骨的形状会因品系、性别和周龄的不同而存在差异。颅骨厚度并不均匀,部分区域较薄,部分区域较厚。此外,也很难保证每次手术中小鼠颅骨都处于完全相同的位置。实际操作中不可能测量所有这些特征,并为每只小鼠预先编程机器人运动轨迹。因此,本文提出了一种自主机器人钻孔方法。该方法由钻孔轨迹规划和基于图像的任务完成度识别两部分组成。轨迹规划模块根据每个离散点的任务完成度调整钻头的z轴位置,并通过约束三次样条插值生成三维钻孔路径,同时避免超调。任务完成度识别模块采用受DSSD(反卷积单发多框检测器)启发的深度学习模型,估计每个离散点的任务完成度。由于鸡蛋在形状、厚度和力学特性方面与小鼠颅骨具有相似特征,研究选择在不破坏下方卵膜的前提下去除蛋壳作为模拟任务。研究使用搭载钻头的6自由度机械臂对所提方法进行了评估,在20次试验中成功率达到80%。

英文摘要:

Robotic assistance for experimental manipulation in the life sciences is expected to enable precise manipulation of valuable samples, regardless of the skill of the scientist. Experimental specimens in the life sciences are subject to individual variability and deformation, and therefore require autonomous robotic control. As an example, we are studying the installation of a cranial window in a mouse. This operation requires the removal of the skull, which is approximately 300 um thick, to cut it into a circular shape 8 mm in diameter, but the shape of the mouse skull varies depending on the strain of mouse, sex and week of age. The thickness of the skull is not uniform, with some areas being thin and others thicker. It is also difficult to ensure that the skulls of the mice are kept in the same position for each operation. It is not realistically possible to measure all these features and pre-program a robotic trajectory for individual mice. The paper therefore proposes an autonomous robotic drilling method. The proposed method consists of drilling trajectory planning and image-based task completion level recognition. The trajectory planning adjusts the z-position of the drill according to the task completion level at each discrete point, and forms the 3D drilling path via constrained cubic spline interpolation while avoiding overshoot. The task completion level recognition uses a DSSD-inspired deep learning model to estimate the task completion level of each discrete point. Since an egg has similar characteristics to a mouse skull in terms of shape, thickness and mechanical properties, removing the egg shell without damaging the membrane underneath was chosen as the simulation task. The proposed method was evaluated using a 6-DOF robotic arm holding a drill and achieved a success rate of 80% out of 20 trials.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑