arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2303.07089eess.SP
收藏

基于光谱特性的高光谱激光雷达距离分辨率增强方法

Range Resolution Enhanced Method with Spectral Properties for Hyperspectral Lidar

Yuhao Xia, Shilong Xu, Hui Shao, Ahui Hou, Jiajie Fang, Fei Han, Youlong Chen, Jiaqi Wen, Yuwei Chen, Yihua Hu

AI总结:

针对高光谱LiDAR中近距多目标形成的伪单脉冲波形难以分解的问题,提出基于偏斜正态分布混合模型的分解方法,将4ns脉宽激光的距离分辨率最高从60cm提升至5cm,达到该领域最优水平。

摘要:

在从高光谱全波形LiDAR回波中提取各类几何与光谱信息的过程中,波形分解是首要步骤。我们提出了一种新方法,用于处理多目标距离极近时波形交叠形成的“伪单脉冲”波形。我们首先采用单一偏斜正态分布(SND)模型拟合所有光谱通道的波形,统计回波的几何中心位置分布,以判断其中是否包含多目标。“伪单脉冲”的几何中心位置分布随波长变化呈现聚集性与不对称性,而单目标回波中不存在这种不对称现象,理论与实验数据均验证了这一点。基于该观测结果,我们进一步提出了一种利用SND混合模型的高光谱波形分解方法,步骤包括:1)根据回波与拟合SND波形在几何中心位置、脉冲宽度、偏斜系数三个特征上的差异,初始化新的波形分量参数及其取值范围;2)对所有通道执行单通道波形分解;3)基于所有单通道分解结果的统计参数(几何中心位置的标准差与均值)设置阈值,识别离群通道;4)对这些离群通道重新执行单通道波形分解。对于脉宽4ns的激光脉冲,所提方法将距离分辨率从60cm最高提升至5cm,代表了“伪单脉冲”波形分解领域的当前最优水平。

英文摘要:

Waveform decomposition is needed as a first step in the extraction of various types of geometric and spectral information from hyperspectral full-waveform LiDAR echoes. We present a new approach to deal with the "Pseudo-monopulse" waveform formed by the overlapped waveforms from multi-targets when they are very close. We use one single skew-normal distribution (SND) model to fit waveforms of all spectral channels first and count the geometric center position distribution of the echoes to decide whether it contains multi-targets. The geometric center position distribution of the "Pseudo-monopulse" presents aggregation and asymmetry with the change of wavelength, while such an asymmetric phenomenon cannot be found from the echoes of the single target. Both theoretical and experimental data verify the point. Based on such observation, we further propose a hyperspectral waveform decomposition method utilizing the SND mixture model with: 1) initializing new waveform component parameters and their ranges based on the distinction of the three characteristics (geometric center position, pulse width, and skew-coefficient) between the echo and fitted SND waveform and 2) conducting single-channel waveform decomposition for all channels and 3) setting thresholds to find outlier channels based on statistical parameters of all single-channel decomposition results (the standard deviation and the means of geometric center position) and 4) re-conducting single-channel waveform decomposition for these outlier channels. The proposed method significantly improves the range resolution from 60cm to 5cm at most for a 4ns width laser pulse and represents the state-of-the-art in "Pseudo-monopulse" waveform decomposition.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑