Buckling induced by viscous flow changes the shape of sheet-like nanomaterial particles suspended in liquids. This instability at the particle scale affects collective behavior of suspension flows and has many technological and biological implications. Here, we investigated the effect of viscous hydrodynamic interactions on the morphology of flexible sheets. By analyzing a model experiment using thin sheets suspended in a shear cell, we found that a pair of sheets can bend for a shear rate ten times lower than the buckling threshold defined for a single sheet. This effect is caused by a lateral hydrodynamic force that arises from the disturbance flow field induced by the neighboring sheet. The lateral hydrodynamic force removes the buckling instability but massively enhances the bending deformation. For small separations between sheets, lubrication forces prevail and prevent deformation. Those two opposing effects result in a non-monotonic relation between distances and shear rate for bending. Our study suggests that the morphology of sheet-like particles in suspensions is not purely a material property, but also depends on particle concentration and microstructure.
As 2D materials such as graphene, transition metal dichalcogenides, and 2D polymers become more prevalent, solution processing and colloidal-state properties are being exploited to create advanced and functional materials. However, our understanding of the fundamental behavior of 2D sheets and membranes in fluid flow is still lacking. In this work, we perform numerical simulations of athermal semiflexible sheets with hydrodynamic interactions in shear flow. For sheets initially oriented in the flow-gradient plane, we find buckling instabilities of different mode numbers that vary with bending …
In this video, Ray-tracing data visualization technique was used to obtain realistic and detailed flow motions during droplet collision. The differences of collision outcome between Newtonian and non-Newtonian were compared. Various types of droplet collision were presented, including bouncing, coalescence, and stretching separation. Because of the reducing of equivalent viscosity caused by shear stress, the gas film between shear-thinning droplet is thinner than Newtonian liquid. Since thinner gas film promotes coalescence, shear thinning liquid has smaller area of bouncing regime in the diag…
Small flexible fibers in a turbulent flow are found to be most of the time as straight as stiff rods. This is due to the cooperative action of flexural rigidity and fluid stretching. However, fibers might bend and buckle when they tumble and experience a strong-enough local compressive shear. Such events are similar to an activation process, where the role of temperature is played by the inverse of Young's modulus. Numerical simulations show that buckling occurs very intermittently in time. This results from unexpected long-range Lagrangian correlations of the turbulent shear.
In this fluid dynamics video, we study a two-phase flow in an elastic Hele-Shaw cell that involves two distinct fluid- and solid-based instabilities: viscous fingering and sheet buckling. We show that the relative importance of the two instabilities is controlled by a single non-dimensional parameter, which provides a measure of the elasticity of the flexible wall. We employ numerical simulations to show that for relatively stiff [soft] walls, the system's behaviour is dominated by viscous fingering [sheet buckling]. Strong interactions between the two instabilities arise in an intermediate re…
As a stiff polymer tumbles in shear flow, it experiences compressive viscous forces that can cause it to buckle and undergo a sequence of morphological transitions with increasing flow strength. We use numerical simulations to uncover the effects of these transitions on the steady shear rheology of a dilute suspension of stiff polymers. Our results agree with classic scalings for Brownian rods in relatively weak flows but depart from them above the buckling threshold. Signatures of elastoviscous buckling include enhanced shear thinning and an increase in the magnitude of normal stress differen…
We analyse the buckling stability of a thin, viscous sheet when subject to simple shear, providing conditions for the onset of the dominant out-of-plane modes using two models: (i) an asymptotic theory for the dynamics of a viscous plate and (ii) the full Stokes equations. In either case, the plate is stabilised by a combination of viscous resistance, surface tension and buoyancy relative to an underlying denser fluid. In the limit of vanishing thickness, plates buckle at a shear rate $γ/(μd)$ independent of buoyancy, where 2d is the plate thickness, $γ$ is the average surface tension between …
In this work, we extend the analyses devoted to Newtonian viscous fluids previously reported by Ribe [Physical Review E 68, 036305 (2003)], by investigating shear thickening (dilatant) and shear thinning (pseudoplastic) effects on the development of folding instabilities in non-Newtonian viscous sheets of which viscosity is given by a power-law constitutive equation. Such instabilities are trigged by compression stresses acting on viscous sheets that leave a channel at a very small initial velocity, fall, and then hit a solid surface or a fluid substrate. Our study is conducted through a mixed…
When a drop of fluid hits a small solid target of comparable size, it expands radially until reaching a maximum diameter and subsequently recedes. In this work, we show that the expansion process of liquid sheets is controlled by a combination of shear (on the target) and biaxial extensional (in the air) deformations. We propose an approach toward a rational description of the phenomenon for Newtonian and viscoelastic fluids by evaluating the viscous dissipation due to shear and extensional deformations, yielding a prediction of the maximum expansion factor of the sheet as a function of the re…
We report on a flow sensing approach based on deflection monitoring of micro beams buckled by the compressive thermal stress due to electrothermal Joules heating. The air stream convectively cooling the device affects both the critical buckling values of the electric current and the postbuckling deflections of the structure. After calibration, the flow velocity was obtained from the deflections measurements. The quasi-static responses of 2000 microns long, 10 microns wide and 30 microns high single crystal silicon beam transduced using image processing were consistent with the prediction of th…
The fluid-structure interactions between flexible fibers and viscous flows play an essential role in various biological phenomena, medical problems, and industrial processes. Of particular interest is the case of particles freely transported in time-dependent flows. This work elucidates the dynamics and morphologies of actin filaments under oscillatory shear flows by combining microfluidic experiments, numerical simulations, and theoretical modeling. Our work reveals that, in contrast to steady shear flows, in which small orientational fluctuations from a flow-aligned state initiate tumbling a…
Fluid dynamics videos of unstable thin annular liquid sheets are presented in this short paper. These videos are to be presented in the Gallery of Fluid Motion for the American Physical Society 65th Annual Meeting of the Division of Fluid Dynamics in San Diego, CA, 18-20 November 2012. An annular sheet of thickness h=1mm and mean radius R=18.9mm is subjected to aerodynamic axial shear from co-flowing air at various shear rates on both the inner and outer surface at a liquid sheet Reynolds Number of Re=500.
The impact of droplets on liquid pools is ubiquitous in nature and many industrial applications. Most previous studies of droplet impact focus on Newtonian fluids, while less attention has been paid to the impact dynamics of non-Newtonian droplets, even though non-Newtonian fluids are widely used in many applications. In this study, the splashing dynamics of shear-thinning droplets with yield stress are studied by combined experiments and simulations. The formation and the propagation of the ejecta sheet produced during the splashing process are considered, and the velocity, the radius, and th…
We investigate the transient, fluid structure interaction (FSI) of a non-Newtonian fluid peeling two linearly elastic sheets at low Reynolds numbers. Two different non-Newtonian fluids are considered; a simplified sPTT model, and an inelastic fluid with shear thinning viscosity (generalized Newtonian fluid). In the limit of small gap between the sheets, we invoke a lubrication approximation and numerically solve for the gap height between the two sheets during the start-up of a pressure-controlled flow. What we observe is that for an impulse pressure applied to the sheet inlet, the peeling fro…
In this study, we perform a numerical analysis of the instability of a ligament in shear flow and investigate the effects of air-liquid shear on the growth rate of the ligament interface, breakup time, and droplet diameter formed by the breakup. The ligament is stretched in the flow direction by the shearing of airflow. Furthermore, as the influence of the shear flow increases, the ligament becomes deformed into a liquid sheet, and a perforation forms at the center of the liquid sheet. The liquid sheet breaks up due to the growth of the perforation and contracts under the influence of surface …
We perform Brownian dynamics simulations of semiflexible colloidal sheets with hydrodynamic interactions and thermal fluctuations in shear flow. As a function of the ratio of bending rigidity to shear energy (a dimensionless quantity we denote $S$) and the ratio of bending rigidity to thermal energy, we observe a dynamical transition from stochastic flipping to crumpling and continuous tumbling. This dynamical transition is broadened by thermal fluctuations, and the value of $S$ at which it occurs is consistent with the onset of chaotic dynamics found for athermal sheets. The effects of differ…
The current study is a pioneering work in presenting the boundary layer equations for the two-dimensional flow and heat transfer of the Cross fluid over a linearly stretching sheet. The system of partial differential equations is turned down into highly non-linear ordinary differential equations by applying suitable similarity transformations. The stretching sheet solutions are presented via. a numerical technique namely the shooting method and graphs are constructed for the shear-thinning as well as shear-thickening regime. The impact of the emerging parameters namely the power-law index , th…
In this work we study the fingering double diffusive convection, namely the buoyancy-driven convection flow within a fluid layer experiencing an unstable salinity gradient and a stable thermal gradient. Especially, we investigate the influences from a background shear with uniform strength. Linear stability analysis indicates that the unstable modes shift from a circular shape to a sheet-like shape as the shear becomes stronger. Three dimensional direction numerical simulations are conducted for five groups of cases, each of which has the same combination of thermal and salinity gradients (mea…
Buckling plays a critical role in the transport and dynamics of elastic microfilaments in Stokesian fluids. However, previous work has only considered filaments with homogeneous structural properties. Filament backbone stiffness can be non-uniform in many biological systems like microtubules, where the association and disassociation of proteins can lead to spatial and temporal changes into structure. The consequences of such non-uniformities in the configurational stability and transport of these fibers are yet unknown. Here, we use slender-body theory and Euler-Bernoulli elasticity coupled wi…
Cilia and flagella are hair-like appendages that protrude from the surface of a variety of eukaryotic cells and deform in a wavelike fashion to transport fluids and propel cells. Motivated by the ubiquity of non-Newtonian fluids in biology, we address mathematically the role of shear-dependent viscosities on both the waving flagellar locomotion and ciliary transport by metachronal waves. Using a two-dimensional waving sheet as model for the kinematics of a flagellum or an array of cilia, and allowing for both normal and tangential deformation of the sheet, we calculate the flow field induced b…
The full MHD problem of the flow and heat transfer due to a linearly stretching sheet in the presence of a transverse magnetic field is put in a self-similar form. Traditionally ignored physical processes such as induced magnetic field, viscous dissipation, Joule heating, and work shear are included and their importance is established. Cases of prescribed surface temperature, prescribed heat flux, surface feed (injection or suction), velocity slip, and thermal slip are also considered. The problem is shown to admit self similarity. Sample numerical solutions are obtained for chosen combination…
In this paper, we investigate the magnetohydrodynamic viscous flow with second order slip flow model over a permeable shrinking surface. We have obtained the closed form of exact solution of Navier-Stokes equations by using similarity variable technique. The effects of slip, suction and magnetic parameter have been investigated in detail. The results show that there are two solution branches, namely lower and upper solution branch. The behavior of velocity and shear stress profiles for different values of slip, suction and magnetic parameters has been discussed through graphs.
Concentrated suspensions may shear-thin when the suspended particles form planar sheets that slide over one another with less friction than if the particles are randomly distributed. In a naïve model the suspension is described by a mean effective viscosity, and particles that collide with each other redistribute the mean density in the shearing direction. This leads to a diffusion equation for the particle density. If the viscosity in the unthinned state is a steeply increasing function of particle density the effective diffusion coefficient is negative and the diffusion equation, meaningful …
