arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2303.03557cs.CE
收藏

基于等几何分析的超材料热机械臂水平集拓扑优化

Level set topology optimization of metamaterial-based heat manipulators using isogeometric analysis

Chintan Jansari, Stéphane P. A. Bordas, Elena Atroshchenko

摘要:

我们利用水平集拓扑优化找到最佳的材料分布的超材料为基础的热操纵器。水平集函数,几何形状,和解决方案领域的参数化使用非均匀有理B样条(NURBS)基函数,以利用容易控制的光滑性和连续性。此外,NURBS近似可以精确地生成圆锥几何,并为高阶单元提供更高的效率。水平集函数在控制点处的值(称为展开系数)被用作设计变量。对于优化,我们使用先进的数学规划技术,序列二次规划(SQP)。考虑到大量的设计变量和少量的约束条件与我们的优化问题,伴随方法被用来计算所需的灵敏度相对于设计变量。通过求解三个数值算例,验证了该方法的有效性和鲁棒性.我们还表明,目前的方法可以处理不同的几何形状和类型的目标函数。此外,正则化技术,如吉洪诺夫正则化和体积正则化已被探索,以减少不必要的复杂性,并增加优化的拓扑结构的可制造性。

英文摘要:

We exploit level set topology optimization to find the optimal material distribution for metamaterial-based heat manipulators. The level set function, geometry, and solution field are parameterized using the non-uniform rational B-spline (NURBS) basis functions in order to take advantage of easy control of smoothness and continuity. In addition, NURBS approximations can produce conic geometries exactly and provide higher efficiency for higher-order elements. The values of the level set function at the control points (called expansion coefficients) are utilized as design variables. For optimization, we use an advanced mathematical programming technique, Sequential Quadratic Programming (SQP). Taking into account a large number of design variables and the small number of constraints associated with our optimization problem, the adjoint method is utilized to calculate the required sensitivities with respect to the design variables. The efficiency and robustness of the proposed method are demonstrated by solving three numerical examples. We have also shown that the current method can handle different geometries and types of objective functions. In addition, regularization techniques such as Tikhonov regularization and volume regularization have been explored to reduce unnecessary complexity and increase the manufacturability of optimized topologies.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑