面向深部神经外科手术的流程优化可转向微导管研究
Towards a Procedure Optimised Steerable Microcatheter for Deep Seated Neurosurgery
AI总结:
本文提出采用热拉伸技术制造可编程斜尖针头(PBN)微导管,以解决深部神经外科手术中针头微型化难题,实验验证了1.3毫米原型在微型化上的优势,但转向行为受材料限制。
摘要:
近年来,可转向针头在微创手术(MIS)中引起了广泛关注。其中,柔性可编程斜尖针头(PBN)概念已成功在体内演示,以评估在绵羊模型中通过2.5毫米PBN原型进行化疗药物对流增强递送(CED)的可行性。然而,对于涉及深部组织结构的其他诊断和治疗程序,进一步缩小尺寸是必要的。由于PBN具有复杂的横截面几何形状,标准生产方法(如挤压)在进一步减小外径时会失效。本文展示了我们首次尝试采用热拉伸技术为PBN演示一种新的制造方法。我们对2.5毫米PBN和本文描述的新型1.3毫米热拉伸(TD)PBN原型进行了实验表征测试。结果表明,热拉伸在微型化复杂针头结构方面具有显著优势。然而,由于首次尝试中材料的选择,转向行为受到影响,这一局限性将在未来的工作中解决。
英文摘要:
In recent years, the steerable needles have attracted significant interest in Minimally Invasive Surgery (MIS). Amongst these, the flexible Programmable-bevel tip needle (PBN) concept has successfully achieved an in-vivo demonstration to evaluate the feasibility of Convection Enhanced Delivery (CED) of chemotherapeutics within the ovine model, with a 2.5 mm PBN prototype. However, further size reduction is necessary for other diagnostic and therapeutic procedures involving deep-seated tissue structures. Since PBNs have a complex cross-section geometry, standard production methods, such as extrusion, fails as the outer diameter is reduced further. This paper presents our first attempt to demonstrate a new manufacturing method for the PBN that employs thermal drawing technology. Experimental characterisation tests were performed for the 2.5 mm PBN and a new 1.3 mm Thermally Drawn (TD) PBN prototype described here. The results show that thermal drawing presents a significant advantage in miniaturising complex needle structures. However, the steering behaviour is affected due to the choice of material in this first attempt, a limitation which will be addressed in future work.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。