arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2302.13141cs.RO
收藏

3D打印的具有梯度孔隙率的本体感觉软体流体驱动器

3D Printed Proprioceptive Soft Fluidic Actuators with Graded Porosity

University of Twente(特文特大学);Department of Biomechanical Engineering(生物医学工程系)

Nick Willemstein, Herman van der Kooij, Ali Sadeghi

AI总结:

本研究提出一种3D打印梯度多孔软体流体驱动器的集成制造方法,实现驱动与压阻传感一体化,并利用Wiener-Hammerstein模型补偿迟滞,实现高精度应变估计。

摘要:

将驱动和本体感觉集成到机器人本体中,可以在一个集成系统中同时提供驱动和传感功能。在本工作中,研究了一种制造此类驱动器的方法,该方法依赖于3D打印来制造具有压阻传感功能的软梯度多孔驱动器,并利用辨识模型进行应变估计。通过3D打印,利用导电热塑性弹性体制成的梯度多孔结构,同时实现了用于驱动的机械编程和压阻传感。而辨识的Wiener-Hammerstein(WH)模型通过补偿传感驱动器的非线性迟滞来估计应变。研究了三种类型的驱动器,即:弯曲驱动器、收缩器和三自由度弯曲段(3DoF)。结果表明,收缩器的孔隙率能够实现行程和电阻变化的定制。此外,WH模型能够为所有三种驱动器提供平均高拟合度(83%)和低均方根误差(6%)的应变估计,显著优于线性模型(拟合度/均方根误差为76.2%/9.4%)。这些结果表明,将3D打印梯度多孔结构与系统辨识相结合的集成制造方法,能够实现可通过孔隙率定制驱动和传感行为、同时补偿非线性迟滞的传感驱动器。

英文摘要:

Integration of both actuation and proprioception into the robot body would provide actuation and sensing in a single integrated system. Within this work, a manufacturing approach for such actuators is investigated that relies on 3D printing for fabricating soft-graded porous actuators with piezoresistive sensing and identified models for strain estimation. By 3D printing, a graded porous structure consisting of a conductive thermoplastic elastomer both mechanical programming for actuation and piezoresistive sensing were realized. Whereas identified Wiener-Hammerstein (WH) models estimate the strain by compensating the nonlinear hysteresis of the sensorized actuator. Three actuator types were investigated, namely: a bending actuator, a contractor, and a three DoF bending segment (3DoF). The porosity of the contractors was shown to enable the tailoring of both the stroke and resistance change. Furthermore, the WH models could provide strain estimation with on average high fits (83%) and low RMS errors (6%) for all three actuators, which outperformed linear models significantly (76.2/9.4% fit/RMS error). These results indicate that an integrated manufacturing approach with both 3D printed graded porous structures and system identification can realize sensorized actuators that can be tailored through porosity for both actuation and sensing behavior but also compensate for the nonlinear hysteresis.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑