含微气泡柔性压电驱动喷墨通道的共振特性
Resonance behavior of a compliant piezo-driven inkjet channel with an entrained microbubble
摘要:
压电驱动的按需滴墨(DOD)打印头中夹带的微气泡干扰微流体墨水通道的声学,从而干扰喷射行为。在这里,油墨通道的谐振行为作为微气泡的大小和气泡的数量的函数进行了研究,通过理论建模和实验。该系统被建模为一组两个耦合的谐振子:一个对应于顺应性油墨通道和一个微泡。预测和测量的本征频率是非常一致的。有人发现,谐振频率是独立的气泡的大小,只要遵守的气泡占主导地位的压电致动器。耦合系统的本征频率的准确描述需要包括由于约束的夹带微泡的增加的惯性。我们表明,可以准确地获得一个封闭的气泡的惯性,通过使用一个简单的势流方法。模型和测量的微泡共振曲线之间的良好协议进一步验证了该模型。因此,本工作提供了物理洞察力的耦合动力学的顺应性油墨通道夹带微泡。
英文摘要:
Microbubbles entrained in a piezo-driven drop-on-demand (DOD) printhead disturb the acoustics of the microfluidic ink channel and thereby the jetting behavior. Here, the resonance behavior of an ink channel as a function of the microbubble size and the number of bubbles is studied through theoretical modeling and experiments. The system is modeled as a set of two coupled harmonic oscillators: one corresponding to the compliant ink channel and one to the microbubble. The predicted and measured eigenfrequencies are in excellent agreement. It was found that the resonance frequency is independent of the bubble size as long as the compliance of the bubble dominates over that of the piezo actuator. An accurate description of the eigenfrequency of the coupled system requires the inclusion of the increased inertance of the entrained microbubble due to confinement. We show that the inertance of a confined bubble can be accurately obtained by using a simple potential flow approach. The model is further validated by the excellent agreement between the modeled and measured microbubble resonance curves. The present work therefore provides physical insight in the coupled dynamics of a compliant ink channel with an entrained microbubble.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。