arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2302.12240physics.app-phphysics.flu-dyn
收藏

四氢呋喃多相悬浮液滴相变过程中的界面效应

Interfacial Effects during Phase Change in Multiple Levitated Tetrahydrofuran Hydrate Droplets

Adam McElligott, André Guerra, Alexia Denoncourt, Alejandro D. Rey, Phillip Servio

摘要:

在这项研究中,使用直接数字和红外成像技术,冻结多达三个同时THF水合物液滴进行了研究。成核起始于水溶液-空气界面。两种伪异质机制产生了额外的成核界面:一种来自夹带微泡的空化效应,另一种来自影响液滴表面的亚可见冰颗粒,也称为水合物成核颗粒(HNP)。对于在第二位置和第三位置都包含液滴的系统,所有液滴之间的成核在统计上是同时的。这种效应可能是由成核时产生的高液-固界面压力引起的,导致液滴周围的初始水合物壳中出现一些裂纹,并将额外的HNP(现在是水合物)释放到空气中。在结晶过程中,THF水合物液滴形成完全白色的不透明,称为光学透明度损失或OCL。有人建议,在液滴内的高水合物生长速率导致在固相内的微小气泡的捕获。反过来,光通过许多更小的气泡折射导致了OCL。这些气泡产生结构不均匀性,这可以解释完全固化后液滴的体积膨胀如何为23.6%,而在纯的固定THF水合物系统中为7.4%。最后,在熔化期间在液滴的顶部和底部之间形成的热梯度导致沿空气-液体界面的表面张力梯度。反过来,对流细胞在液滴内发展,使其围绕水平轴快速旋转。

英文摘要:

In this study, using direct digital and infrared imaging techniques, the freezing of up to three simultaneous THF hydrate droplets was investigated for the first time. Nucleation was initiated at the aqueous solution-air interface. Two pseudo-heterogeneous mechanisms created additional nucleation interfaces: one from cavitation effects entraining microbubbles and another from subvisible ice particles, also called hydrate nucleating particles (HNPs), impacting the droplet surface. For systems containing droplets in both the second and third positions, nucleation was statistically simultaneous between all droplets. This effect may have been caused by the high liquid-solid interfacial pressures that developed at nucleation, causing some cracking in the initial hydrate shell around the droplet and releasing additional HNPs (now of hydrate) into the air. During crystallization, the THF hydrate droplets developed a completely white opacity, termed optical clarity loss or OCL. It was suggested that high hydrate growth rates within the droplet resulted in the capture of tiny air bubbles within the solid phase. In turn, light refraction through many smaller bubbles resulted in the OCL. These bubbles created structural inhomogeneities, which may explain how the volumetric expansion of the droplets upon complete solidification was 23.6% compared with 7.4% in pure, stationary THF hydrate systems. Finally, the thermal gradient that developed between the top and bottom of the droplet during melting resulted in a surface tension gradient along the air-liquid interface. In turn, convective cells developed within the droplet, causing it to spin rapidly about the horizontal axis.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑