arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2302.11240physics.app-ph
收藏

物理老化对3D打印热塑性塑料弯曲蠕变的影响

Effect of physical aging on the flexural creep in 3D printed thermoplastic

Marcel Fischbach, Kerstin Weinberg

AI总结:

本文通过3D打印PLA试样的弯曲蠕变实验,验证物理老化导致蠕变曲线在对数时间轴上平移,并指出远低于玻璃化转变温度时仍存在不可忽视的长期蠕变。

摘要:

基于挤出的3D打印已成为最常见的增材制造方法之一,并在工程中得到广泛应用。本文介绍了对3D打印PLA试样进行弯曲蠕变实验的结果,重点关注物理老化引起的蠕变行为变化。实验表明,在老化试样上获得的蠕变曲线在对数时间尺度上彼此平移,其方式可由物理老化理论解释。3D打印热塑性塑料发生物理老化的原因,被认为是聚合物在挤出过程中经历的特殊热处理。此外,本文还展示了一项长期弯曲蠕变实验的结果,证明即使在远低于玻璃化转变温度的条件下,也能观察到长期内不可忽略的蠕变。在设计由3D打印热塑性塑料制成的构件时,应考虑此类蠕变效应。

英文摘要:

Extrusion-based 3D printing has become one of the most common additive manufacturing methods and is widely used in engineering. This contribution presents the results of flexural creep experiments on 3D printed PLA specimens, focusing on changes in creep behavior due to physical aging. It is shown experimentally that the creep curves obtained on aged specimens are shifted to each other on the logarithmic time scale in a way that the theory of physical aging can explain. The reason for the physical aging of 3D printed thermoplastics is assumed to be the special heat treatment that the polymer undergoes during extrusion. Additionally, results of a long-term flexural creep experiment are shown, demonstrating that non-negligible creep over long periods can be observed even at temperatures well below the glass transition temperature. Such creep effects should be considered for designing components made of 3D printed thermoplastics.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑