高温亚音速流中沙粒在固体基底上的沉积
Deposition of sand particles on a solid substrate in a high-temperature subsonic flow
摘要:
已经观察到沙粒吸入燃气轮机发动机会导致发动机部件损坏,并且在某些情况下会导致灾难性故障。导致发动机故障的一种这样的机制是通过熔融颗粒在发动机的热部分中的涡轮叶片上的沉积而发生的。沉积的材料发生化学反应并穿透涡轮叶片上的热障涂层(TBC),最终损坏涡轮叶片。在这项工作中,我们调查的沉积砂颗粒上的固体基板使用双向耦合欧拉-拉格朗日模拟。在这些模拟中,1700 K的热气体从马赫数为0.3的圆形进气道中喷出。同时,以1克/分钟的恒定质量流率注入模拟氧化钙-氧化镁-铝硅酸盐(CMAS)的球形单分散砂粒。研究了这些颗粒在沿轴向距离入口20 cm处的固体基底上的沉积。对三种不同的合成砂颗粒CMAS、AFRL 02和AFRL 03进行了模拟。研究了Stokes数对颗粒沉积数、回弹速度和恢复系数等颗粒特性的影响。
英文摘要:
Ingestion of sand particles into gas turbine engines has been observed to cause damage to engine components and in some cases leads to catastrophic failure. One such mechanism responsible for engine failure occurs through the deposition of molten particles on the turbine blades in the hot-section of the engine. The deposited material reacts chemically and penetrates the thermal barrier coating (TBC) on the turbines blades eventually damaging them. In this work, we investigate the deposition of sand particles on a solid substrate using two-way coupled Euler-Lagrange simulations. In these simulations, hot gas at 1700 K is issued from a circular inlet at Mach 0.3. Simultaneously, spherical mono-dispersed sand particles, modeled after the Calcia-Magnesia-Alumino-Silicates(CMAS), are injected at a constant mass flow rate of 1 gram per minute. The deposition of these particles on a solid substrate, placed 20 cm away from the inlet along the axial direction, is investigated. Simulations are carried out for three different synthetic sand particles CMAS, AFRL 02 and AFRL 03. The effect of Stokes number on particle properties such as number of particle depositions, rebound velocity and coefficient of restitution are investigated.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。