arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2302.01147cond-mat.mtrl-sci
收藏

名义上(001)取向Si衬底上生长的GaP1-xNx层的生长模式及耦合的形貌-成分调制

Growth modes and coupled morphological-compositional modulations in GaP1-xNx layers grown on nominally (001)-oriented Si substrates

K. Ben Saddik, S. Fernandez-Garrido, R. Volkov, J. Grandal, N. Borgardt, B. J. Garcia

AI总结:

本研究探究(001)取向Si衬底上GaP1-xNx的化学束外延生长,明确生长参数对生长模式及材料性能的影响,证实可制备高质量均匀薄膜及高氮含量无调制薄膜的可行性。

摘要:

我们研究了GaP1-xNx的化学束外延生长,以关联其在名义上(001)取向Si衬底上生长时的生长参数与性能,这是光电器件与标准Si技术晶格匹配集成所需要的。我们采用RHEED(反射式高能电子衍射)、XRD(X射线衍射)、RBS(卢瑟福背散射谱)、NRA(核反应分析)、EDX能谱、AFM(原子力显微镜)和TEM(透射电子显微镜),分析了不同生长温度和N前驱体通量下制备的样品的生长模式,以及化学、形貌和结构特性。我们的结果表明,在x不超过0.04的范围内,能够以二维(即逐层)生长方式合成出表面光滑、化学均匀且结构质量高的GaP1-xNx层。对于给定的N摩尔分数,降低生长温度同时减小N前驱体通量,更有利于逐层生长模式的形成。在固定温度下提高N前驱体通量以增加N掺入量时,一旦超过与温度相关的阈值,薄膜质量就会下降;超过该阈值后,生长中的薄膜在达到几纳米的临界厚度后,会发生从二维到三维的生长模式转变。发生该转变后,薄膜的形貌和化学成分会沿[110]方向发生调制,调制周期为几十纳米。此时表面形貌的特征是形成带有{113}晶面的线结构,而在相邻的(113)和(-1-13)晶面之间形成的凹槽处,N浓度会升高。我们得出结论:制备与Si晶格匹配(x=0.021)、甚至N含量高达x=0.04的均匀厚GaP1-xNx层是可行的。研究还证实,当薄膜厚度保持在二维-三维生长模式转变的临界值以下时,能够实现N摩尔分数超过0.04且不引发耦合的形貌-成分调制。

英文摘要:

We investigated the chemical beam epitaxy of GaP1-xNx to correlate the growth parameters with their properties when they are grown on nominally (001)-oriented Si substrates, as desired for the lattice-matched integration of optoelectronic devices with the standard Si technology. The growth mode as well as the chemical, morphological and structural properties of samples prepared using different growth temperatures and N precursor fluxes were analyzed by RHEED, XRD, RBS, NRA, EDX spectroscopy, AFM and TEM. Our results show that, up to x = 0.04, it is possible to synthesize smooth and chemically homogeneous GaP1-xNx layers with a high-structural quality in a 2D fashion, namely, layer-by-layer. For a given N mole fraction, the layer-by-layer growth mode is favored by lowering the growth temperature while decreasing the N precursor flux. As the flux of the N precursor is increased at a given temperature to enhance N incorporation, the quality of the layers degrades upon exceeding a temperature-dependent threshold; above this threshold, the growing layer experiences a growth mode transition from 2D to 3D after reaching a critical thickness of a few nm. Following that transition, the morphology and the chemical composition become modulated along the [110] direction with a period of several tens of nm. The surface morphology is then characterized by the formation of {113}-faceted wires, while the N concentration is enhanced at the troughs formed in between adjacent (113) and (-1-13) facets. We conclude on the feasibility of fabricating homogeneous thick GaP1-xNx layers lattice matched to Si (x = 0.021) or even with N content up to x=0.04. The possibility of exceeding a N mole fraction of 0.04 without inducing coupled morphological-compositional modulations has also been demonstrated when the layer thickness is kept below the critical value for the 2D-3D growth mode transition.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑