改善铸造Ti $_2$ AlNb合金流动性的成分优化方法及其机理研究
Study on the composition optimization method for improving the fluidity of cast Ti$_2$AlNb alloy and its mechanism
摘要:
研究了Ti-22 Al-25 Nb合金中Al、Nb主元素、Fe、Mo、W、Co、B、Si及其含量对合金流动性的影响。通过热力学软件计算影响Ti $_2$ AlNb合金流动性的热物性参数,对其流动性进行数值模拟试验,并对优化后的合金进行流动性验证试验,筛选出有利于改善合金流动性的成分。最后,对合金流动性改善的机理进行了探讨。结果表明,适量的Nb元素还原比Al元素还原更有利于改善流动性。微量Fe、B、Si元素的加入有利于流动性的改善,其中B元素的改善效果最好,而微量Mo、W、Co的加入不利于流动性的改善。Ti $_2$ AlNb合金的晶化终止机制是具有较宽晶化温度范围的合金的晶化终止机制。Ti-22 Al-24 Nb-0.1B的成分对改善流动性最有利。合金流动性改善的主要原因有两个方面:一方面,降低1at%Nb和添加0.1at%B不仅增加了合金的结晶和析晶潜热,而且降低了熔体粘度和导热系数,从而改善了合金的流动性;另一方面,TiB相细化了晶粒,阻止枝晶长大形成发达的枝晶网络,抑制了凝固区宽度增加对流动性的不利影响,降低了金属液的流动阻力,进一步提高了合金的流动性。
英文摘要:
In this paper, the effects of Al, Nb main elements, Fe, Mo, W, Co, B, Si and their contents on the fluidity of Ti-22Al-25Nb alloy were investigated. The composition that was beneficial to improve the fluidity was screened through the thermodynamic software calculating thermophysical parameters affecting the fluidity of Ti$_2$AlNb alloy, the numerical simulation test of its fluidity and the verification test of the fluidity of optimized alloys. Finally, the improvement mechanism of the alloy fluidity was discussed. Results showed that the appropriate reduction of Nb element was better than Al element for the improvement of fluidity. The addition of trace Fe, B and Si elements were beneficial to the improvement of fluidity, the improvement effect of B element was best, while the addition of trace Mo, W, Co were not conducive to the improvement of fluidity. The cessation mechanism of Ti$_2$AlNb alloy is the cessation mechanism of the alloy with a wide crystallization temperature range. The composition which was most beneficial to improve the fluidity was Ti-22Al-24Nb-0.1B. The main reasons for the improvement of the fluidity had two sides: on the one hand, the reduction of 1at% Nb and the addition of 0.1at% B not only increased the superheat and crystallization latent heat of the alloy, but also reduced the melt viscosity and thermal conductivity, thus improving the fluidity. On the other hand, the TiB phase refined the grains, the fine grains prevented the dendrite from growing into developed dendrite networks, inhibited the adverse effect of the increase in the width of the solidification zone on the fluidity, reduced the flow resistance of the molten metal, and further improved the fluidity of the alloy.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。