arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2301.06525astro-ph.EPphysics.geo-ph
收藏

车里雅宾斯克:一个有许多不同(石质)面孔的岩石:红外研究

Chelyabinsk : a rock with many different (stony) faces: An infrared study

Andreas Morlok, Addi Bischoff, Markus Patzeck, Martin Sohn, Harald Hiesinger

摘要:

为了提供光谱地面实况数据的遥感应用,我们已经测量了中红外光谱(2至18微米)的三个典型的,定义明确的岩性从车里雅宾斯克陨石。这些岩性分为(a)中度冲击、轻度岩性,(b)冲击变暗岩性,和(c)冲击熔融岩性。对四种粒度级(0至25微米、25至63微米、63至125微米和125至250微米)的散装材料和其他薄切片进行分析。在中等震动的轻岩性的粉末状散装材料中,主要由橄榄石、辉石和长石玻璃组成的特征红外特征是8.5和8.8微米之间的Christiansen特征(CF);在约13微米的最细尺寸部分中的透明特征(TF),以及在约9.1微米、9.5微米、10.3微米,10.8微米、11.2至11.3微米、12微米和16至17微米。显微FTIR斑点的光谱特征的范围比在漫反射中获得的范围更宽,但通常是相似的。随着冲击冲击的影响从原始LL 5(或LL 6)材料(具有低或中等程度的冲击)的冲击变暗的岩性和冲击熔融岩性作为端元,我们观察到的光谱特征的衰落或消失。最突出的是在10.8和11.3微米之间的双峰特征的损失,其变成单峰。此外,在纯冲击熔体中,也损失了约9.6微米和约9.1微米的端元岩性特征。这些损失最有可能与随着冲击熔化程度的增加而减少的晶体结构量相关。

英文摘要:

In order to provide spectral ground truth data for remote sensing applications, we have measured midinfrared spectra (2 to 18 micron) of three typical, well defined lithologies from the Chelyabinsk meteorite. These lithologies are classified as (a) moderately shocked, light lithology, (b) shock darkened lithology, and (c) impact melt lithology. Analyses were made from bulk material in four size fractions (0 to 25 micron, 25 to 63 micron, 63 to 125 micron, and 125 to 250 micron), and from additional thin sections. Characteristic infrared features in the powdered bulk material of the moderately shocked, light lithology, dominated by olivine, pyroxene and feldspathic glass, are a Christiansen feature (CF) between 8.5 and 8.8 micron; a transparency feature (TF) in the finest size fraction at about 13 micron, and strong reststrahlen bands (RB) at about 9.1 micron, 9.5 micron, 10.3 micron, 10.8 micron, 11.2 to 11.3 micron, 12 micron, and between 16 and 17 micron. The ranges of spectral features for the micro FTIR spots show a wider range than those obtained in diffuse reflectance, but are generally similar. With increasing influence of impact shock from pristine LL5 (or LL6) material (which have a low or moderate degree of shock) to the shock-darkened lithology and the impact melt lithology as endmembers, we observe the fading or disappearing of spectral features. Most prominent is the loss of a twin peak feature between 10.8 and 11.3 micron, which turns into a single peak. In addition, in the pure impact melt endmember lithology features at about 9.6 micron and about 9.1 micron are also lost. These losses are most likely correlated with decreasing amounts of crystal structure as the degree of shock melting increases.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑