arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2301.04902physics.ins-dethep-ex
收藏

表面处理后的丙烯酸中U/Th残余放射性的研究

Study on U/Th residual radioactivity in acrylic from surface treatment

Yuanxia Li, Xiaohui Qian, Xiaolan Luo, Jie Zhao, Gaofeng Zhang, Xiaoyan Ma, Yuekun Heng, Liangjian Wen, Monica Sisti, Frédéric Perrot, Hongqiang Tang

AI总结:

本文针对江门中微子实验丙烯酸球形容器的表面放射性污染问题,开发了亚ppt级U/Th测量方法,并通过系统测试给出了兼顾低放射性与高透光率的表面处理推荐流程。

摘要:

丙烯酸因其高透光率和低固有放射性而被广泛用作低本底实验中靶容器的材料。然而,其表面在生产过程中容易被污染,因此对表面进行仔细处理对于避免靶的直接污染至关重要。江门中微子实验将使用约600吨丙烯酸来建造直径为35.4米的球形容器,用于盛放2万吨液体闪烁体。由于丙烯酸会与液体闪烁体直接接触,其表面洁净度对液体闪烁体的放射性纯度非常重要。本研究开发了一种新方法,可将丙烯酸中$^{238}$U和$^{232}$Th的放射性测量至亚ppt($<10^{-12}$ g/g)水平,这对本研究中的丙烯酸放射性筛选至关重要。我们对不同的表面处理方法进行了大量本底测试,所推荐的丙烯酸处理流程可实现低放射性和高透光率,并可适用于其他低本底实验。

英文摘要:

Acrylic is widely used as material for the target container in low background experiments due to its high light transparency and low intrinsic radioactivity. However, its surface can be easily contaminated during production, so careful treatment of the surface is essential to avoid direct contamination of the target. The Jiangmen Underground Neutrino Observatory will use about 600~t of acrylic to build the spherical vessel of 35.4~m in diameter for a 20~kt liquid scintillator (LS). Since acrylic will contact the LS directly, the cleanliness of the its surface is quite important for the radiopurity of the LS. A new method for measuring the radioactivity of $^{238}$U and $^{232}$Th in acrylic to sub-ppt ($<10^{-12}$~g/g) was developed, and it is crucial for the acrylic radioactivity screening in this study. We performed many background tests on different surface treatments, and the recommended procedure for the treatment of acrylic to achieve low radioactivity and high light transparency could be applicable to other low background experiments.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑