To achieve multi-Gb/s data rates in 6G optical wireless access networks based on narrow infrared (IR) laser beams, a high-speed receiver with two key specifications is needed: a sufficiently large aperture to collect the required optical power and a wide field of view (FOV) to avoid strict alignment issues. This paper puts forward the systematic design and optimisation of multi-tier non-imaging angle diversity receivers (ADRs) composed of compound parabolic concentrators (CPCs) coupled with photodiode (PD) arrays for laser-based optical wireless communication (OWC) links. Design tradeoffs include the gain-FOV tradeoff for each receiver element and the area-bandwidth tradeoff for each PD array. The rate maximisation is formulated as a non-convex optimisation problem under the constraints on the minimum required FOV and the overall ADR dimensions to find optimum configuration of the receiver bandwidth and FOV, and a low-complexity optimal solution is proposed. The ADR performance is studied using computer simulations and insightful design guidelines are provided through various numerical examples. An efficient technique is also proposed to reduce the ADR dimensions based on CPC length truncation. It is shown that a compact ADR with a height of $\leq0.5$ cm and an effective area of $\leq0.5$ cm$^2$ reaches a data rate of $12$ Gb/s with a half-angle FOV of $30^\circ$ over a $3$ m link distance.
Wireless receiver design is critical to the overall system performance. In this work, we apply the techniques of mixed-integer programming to formulate a unified receiver in relay networks with only partial channel information. We also relax all the constraints into real field to save computations, but at the cost of bit error performance. Moreover, a receiver formulation with adaptive number of constraints is proposed using the cutting plane techniques. Last but not least, number of flops is investigated for different formulations.
Photon counting detectors such as single-photon avalanche diode (SPAD) arrays can be utilized to improve the sensitivity of optical wireless communication (OWC) systems. However, the achievable data rate of SPAD-based OWC systems is strongly limited by the nonlinearity induced by SPAD dead time. In this work, the performance of SPAD-based OWC system with orthogonal frequency division multiplexing (OFDM) is investigated and compared with that of on-off keying (OOK). We employ nonlinear equalization, peak-to-average power ratio optimization by adjusting the OFDM clipping level, and adaptive bit …
Rydberg Atomic Quantum Receivers for Classical Wireless Communications and Sensing: Their Models and Performance
Nanyang Technological University（南洋理工大学）；DSO National Laboratories（DSO国家实验室）；Khalifa University of Science and Technology（哈利法科学技术大学）；University of Southampton（南安普顿大学）
In this paper, we consider a multihop wireless sensor network (WSN) with multiple relay nodes for each hop where the amplify-and-forward (AF) scheme is employed. We present a strategy to jointly design the linear receiver and the power allocation parameters via an alternating optimization approach that maximizes the sum rate of the WSN. We derive constrained maximum sum-rate (MSR) expressions along with an algorithm to compute the linear receiver and the power allocation parameters with the optimal complex amplification coefficients for each relay node. Computer simulations show good performan…
Photon counting detectors such as single-photon avalanche diode (SPAD) arrays are commonly considered for reliable optical wireless communication at power limited regimes. However, SPAD-based receivers suffer from significant dead time induced intersymbol interference (ISI) especially when the incident photon rate is relatively high and the dead time is comparable or even larger than the symbol duration, i.e., sub-dead-time regime. In this work, we propose a novel time-gated SPAD receiver to mitigate such ISI effects and improve the communication performance. When operated in the gated mode, t…
In this paper, we design a novel high-throughput random access scheme for an indoor optical wireless communication (OWC) massive Internet of Things (IoT) scenario. Due to the large density of both IoT devices and OWC access points (APs), we base the proposed scheme on multi-receiver coded slotted ALOHA. In this scenario, collisions at APs are resolved by a centralized interference cancellation decoder that may exploit both spatial and temporal diversity. By applying adaptive control of each OWC AP field of view (FOV), the proposed system is able to dynamically adapt to different IoT device act…
In this paper, we propose to exploit the limited cache packets as side information to cancel incoming interference at the receiver side. We consider a stochastic network where the random locations of base stations and users are modeled using Poisson point processes. Caching schemes to reap both the local caching gain and the interference cancellation gain for the users are developed based on two factors: the density of different user subsets and the packets cached in the corresponding subsets. The packet loss rate (PLR) is analyzed, which depends on both the cached packets and the channel stat…
We consider the problem of oblivious transfer (OT) over OFDM and MIMO wireless communication systems where only the receiver knows the channel state information. The sender and receiver also have unlimited access to a noise-free real channel. Using a physical layer approach, based on the properties of the noisy fading channel, we propose a scheme that enables the transmitter to send obliviously one-of-two files, i.e., without knowing which one has been actually requested by the receiver, while also ensuring that the receiver does not get any information about the other file.
Simultaneous wireless information and power transfer (SWIPT) is an appealing research area because both information and energy can be delivered to wireless devices simultaneously. In this paper, we propose a diplexer-based receiver architecture that can utilizes both the doubling frequency and baseband signals after the mixer. The baseband signals are used for information decoding and the doubling frequency signals are converted to direct current for energy harvesting. We analyze the signal in the receiver and find that the power of the energy harvested is equal to that of information decoded.…
In this work, we propose a covert communication scheme where the transmitter attempts to hide its transmission to a full-duplex receiver, from a warden that is to detect this covert transmission using a radiometer. Specifically, we first derive the detection error rate at the warden, based on which the optimal detection threshold for its radiometer is analytically determined and its expected detection error rate over wireless fading channels is achieved in a closed-form expression. Our analysis indicates that the artificial noise deliberately produced by the receiver with a random transmit pow…
Simultaneous information and power transfer over the wireless channels potentially offers great convenience to mobile users. Yet practical receiver designs impose technical constraints on its hardware realization, as practical circuits for harvesting energy from radio signals are not yet able to decode the carried information directly. To make theoretical progress, we propose a general receiver operation, namely, dynamic power splitting (DPS), which splits the received signal with adjustable power ratio for energy harvesting and information decoding, separately. Three special cases of DPS, nam…
Magnetic induction (MI) based communication and power transfer systems have gained an increased attention in the recent years. Typical applications for these systems lie in the area of wireless charging, near-field communication, and wireless sensor networks. For an optimal system performance, the power efficiency needs to be maximized. Typically, this optimization refers to the impedance matching and tracking of the split-frequencies. However, an important role of magnitude and phase of the input signal has been mostly overlooked. Especially for the wireless power transfer systems with multip…
We consider performance enhancement of asymmetrically-clipped optical orthogonal frequency division multiplexing (ACO-OFDM) and related optical OFDM schemes, which are variations of OFDM in intensity-modulated optical wireless communications. Unlike most existing studies on specific designs of improved receivers, this paper investigates information theoretic limits of all possible receivers. For independent and identically distributed complex Gaussian inputs, we obtain an exact characterization of information rate of ACO-OFDM with improved receivers for all SNRs. It is proved that the high-SNR…
Wireless power transfer (WPT) is a promising new solution to provide convenient and perpetual energy supplies to wireless networks. In practice, WPT is implementable by various technologies such as inductive coupling, magnetic resonate coupling, and electromagnetic (EM) radiation, for short-/mid-/long-range applications, respectively. In this paper, we consider the EM or radio signal enabled WPT in particular. Since radio signals can carry energy as well as information at the same time, a unified study on simultaneous wireless information and power transfer (SWIPT) is pursued. Specifically, th…
The paper is devoted to the analysis of problems appearing in optimisation and improvement of the power-bandwidth efficiency of digital communication feedback systems (FCS). There is shown that unlike digital systems, adaptive FCS with the analogue forward transmission allow full optimisation and derivation of optimal transmission-reception algorithm approaching their efficiency to the Shannon boundary. Differences between the forward channel capacity and capacity of adaptive FCS as communication unit, as well as their influence of the power-bandwidth efficiency of transmission are considered.
This paper studies physical layer security in a wireless ad hoc network with numerous legitimate transmitter-receiver pairs and eavesdroppers. A hybrid full-/half-duplex receiver deployment strategy is proposed to secure legitimate transmissions, by letting a fraction of legitimate receivers work in the full-duplex (FD) mode sending jamming signals to confuse eavesdroppers upon their information receptions, and letting the other receivers work in the half-duplex mode just receiving their desired signals. The objective of this paper is to choose properly the fraction of FD receivers for achievi…
Simultaneous wireless information and power transfer (SWIPT) is anticipated to have abundant applications in future machine or sensor based wireless networks by providing wireless data and energy access at the same time. In this paper, we study a multiuser multiple-input single-output (MISO) broadcast SWIPT system, where a multi-antenna access point (AP) sends information and energy simultaneously via spatial multiplexing to multiple single-antenna receivers each of which implements information decoding (ID) or energy harvesting (EH). Since EH receivers in practice operate with considerably hi…
In this paper, we consider a multihop wireless sensor network with multiple relay nodes for each hop where the amplify-and-forward scheme is employed. We present algorithmic strategies to jointly design linear receivers and the power allocation parameters via an alternating optimization approach subject to different power constraints which include global, local and individual ones. Two design criteria are considered: the first one minimizes the mean-square error and the second one maximizes the sum-rate of the wireless sensor network. We derive constrained minimum mean-square error and constra…
This paper studies the performance of partial-Rake (PRake) receivers in impulse-radio ultrawideband wireless networks when an energy-efficient power control scheme is adopted. Due to the large bandwidth of the system, the multipath channel is assumed to be frequency-selective. By using noncooperative game-theoretic models and large system analysis, explicit expressions are derived in terms of network parameters to measure the effects of self- and multiple-access interference at a receiving access point. Performance of the PRake is compared in terms of achieved utilities and loss to that of the…
Classical beamforming techniques rely on highly linear transmitters and receivers to allow phase-coherent combining at the transmitter and receiver. The transmitter uses beamforming to steer signal power towards the receiver, and the receiver uses beamforming to gather and coherently combine the signals from multiple receiver antennas. When the transmitters and receivers are instead constrained for power and cost reasons to be non-linear one-bit devices, the potential advantages and performance metrics associated with beamforming are not as well understood. We define beamforming at the transmi…
This paper studies online power control policies for outage minimization in a fading wireless link with energy harvesting transmitter and receiver. The outage occurs when either the transmitter or the receiver does not have enough energy, or the channel is in outage, where the transmitter only has the channel distribution information. Under infinite battery capacity and without retransmission, we prove that threshold-based power control policies are optimal. We thus propose disjoint/joint threshold-based policies with and without battery state sharing between the transmitter and receiver, resp…
The end-to-end learning of Simultaneous Wireless Information and Power Transfer (SWIPT) over a noisy channel is studied. Adopting a nonlinear model for the energy harvester (EH) at the receiver, a joint optimization of the transmitter and the receiver is implemented using Deep Neural Network (DNN)-based autoencoders. Modulation constellations for different levels of "power" and "information rate" demand at the receiver are obtained. The numerically optimized signal constellations are inline with the previous theoretical results. In particular, it is observed that as the receiver energy demand …
We consider multi--hop wireless networks carrying unicast flows for multiple users. Each flow has a specified delay deadline, and the lossy wireless links are modelled as binary symmetric channels (BSCs). Since transmission time, also called airtime, on the links is shared amongst flows, increasing the airtime for one flow comes at the cost of reducing the airtime available to other flows sharing the same link. We derive the joint allocation of flow airtimes and coding rates that achieves the proportionally fair throughput allocation. This utility optimisation problem is non--convex, and one o…
In this paper, we study the benefits of full-duplex (FD) receiver jamming in enhancing the physical-layer security of a two-tier decentralized wireless network with each tier deployed with a large number of pairs of a single-antenna transmitter and a multi-antenna receiver. In the underlying tier, the transmitter sends unclassified information, and the receiver works in the halfduplex (HD) mode receiving the desired signal. In the overlaid tier, the transmitter deliveries confidential information in the presence of randomly located eavesdroppers, and the receiver works in the FD mode radiating…
In next generation wireless communication system, wireless transceivers should be able to handle wideband input signals compromising of multiple communication standards.Such multi-standard wireless communication receivers (MWCRs) need filter bank to extract the desired signal of interest from wideband input spectrum and bring it to the baseband for further signal processing tasks such as spectrum sensing, modulation classification,demodulation etc.In MWCRs,rather any wireless receivers, modulated filter banks, such as Discrete Fourier Transform Filter Banks (DFTFB), are preferred due to their …
An asymptotic technique is developed to find the Signal-to-Interference-plus-Noise-Ratio (SINR) and spectral efficiency of a link with N receiver antennas in wireless networks with non-homogeneous distributions of nodes. It is found that with appropriate normalization, the SINR and spectral efficiency converge with probability 1 to asymptotic limits as N increases. This technique is applied to networks with power-law node intensities, which includes homogeneous networks as a special case, to find a simple approximation for the spectral efficiency. It is found that for receivers in dense cluste…
Collisions with hidden terminals is a major cause of performance degradation in 802.11 and likewise wireless networks. Carrier sense multiple access with collision avoidance (CSMA/CA) is utilized to avoid collisions at the cost of spatial reuse. This report studies receiver design to mitigate interference from hidden terminals. A wireless channel model with correlated fading in time is assumed. A message-passing approach is proposed, in which a receiver can successfully receive and decode partially overlapping transmissions from two sources rather than treating undesired one as thermal noise. …
This paper develops a stochastic geometry-based approach for the modeling and analysis of single- and multi-cluster wireless networks. We first define finite homogeneous Poisson point processes to model the number and locations of the transmitters in a confined region as a single-cluster wireless network. We study the coverage probability for a reference receiver for two strategies; closest-selection, where the receiver is served by the closest transmitter among all transmitters, and uniform-selection, where the serving transmitter is selected randomly with uniform distribution. Second, using …
Energy harvesting is a promising solution to prolong the operation of energy-constrained wireless networks. In particular, scavenging energy from ambient radio signals, namely wireless energy harvesting (WEH), has recently drawn significant attention. In this paper, we consider a point-to-point wireless link over the narrowband flat-fading channel subject to time-varying co-channel interference. It is assumed that the receiver has no fixed power supplies and thus needs to replenish energy opportunistically via WEH from the unintended interference and/or the intended signal sent by the transmit…
Covert communications hide the transmission of a message from a watchful adversary while ensuring a certain decoding performance at the receiver. In this work, a wireless communication system under fading channels is considered where covertness is achieved by using a full-duplex (FD) receiver. More precisely, the receiver of covert information generates artificial noise with a varying power causing uncertainty at the adversary, Willie, regarding the statistics of the received signals. Given that Willie's optimal detector is a threshold test on the received power, we derive a closed-form expres…
The design of a compact high-speed and wide field of view (FOV) receiver is challenging due to the presence of two well-known trade-offs. The first one is the area-bandwidth trade-off of photodetectors (PDs) and the second one is the gain-FOV trade-off due to the use of optics. The combined effects of these two trade-offs imply that the achievable data rate of an imaging optical receiver is limited by its FOV, i.e., a rate-FOV trade-off. To control the area-bandwidth trade-off, an array of small PDs can be used instead of a single PD. Moreover, in practice, a large-area lens is required to ens…
In this paper we consider the uplink of a massive MIMO communication system using 5G New Radio-compliant multiple access, which is to co-exist with a radar system using the same frequency band. We propose a system model taking into account the reverberation (clutter) produced by the radar system at the massive MIMO receiver. Then, we propose several linear receivers for uplink data-detection, ranging by the simple channel-matched beamformer to the zero-forcing and linear minimum mean square error receivers for clutter disturbance rejection. Our results show that the clutter may have a strong e…
The issue of non-cooperative transceiver optimization in the uplink of a multiuser wireless code division multiple access data network with widely-linear detection at the receiver is considered. While previous work in this area has focused on a simple real signal model, in this paper a baseband complex representation of the data is used, so as to properly take into account the I and Q components of the received signal. For the case in which the received signal is improper, a widely-linear reception structure, processing separately the data and their complex conjugates, is considered. Several n…
Scavenging energy from ambient radio signals, namely wireless energy harvesting (WEH), has recently drawn significant attention. In this paper, we consider a point-to-point wireless link over the flat-fading channel, where the receiver replenishes energy via WEH from the signals sent by the transmitter. We consider a SISO (single-input single-output) system where the single-antenna receiver cannot decode information and harvest energy independently from the same signal received. Under this practical constraint, we propose a dynamic power splitting (DPS) scheme, where the received signal is spl…
In this work, we adopt channel inversion power control (CIPC) to achieve covert communications aided by a full-duplex receiver. Specifically, the transmitter varies the power and phase of transmitted signals as per the channel to the receiver, such that the receiver can decode these signals without knowing the channel state information. This eliminates the required feedback from the transmitter to the receiver, which aids hiding the transmitter from a warden. The truncated CIPC and conventional CIPC schemes are proposed and examined, where for truncated CIPC covert transmission ceases when the…
This paper considers max-min fairness for wireless energy transfer in a downlink multiuser communication system. Our resource allocation design maximizes the minimum harvested energy among multiple multiple-antenna energy harvesting receivers (potential eavesdroppers) while providing quality of service (QoS) for secure communication to multiple single-antenna information receivers. In particular, the algorithm design is formulated as a non-convex optimization problem which takes into account a minimum required signal-to-interference-plus-noise ratio (SINR) constraint at the information receive…
This paper focuses on the issue of energy efficiency in wireless data networks through a game theoretic approach. The case considered is that in which each user is allowed to vary its transmit power, spreading code, and uplink receiver in order to maximize its own utility, which is here defined as the ratio of data throughput to transmit power. In particular, the case in which linear multiuser detectors are employed at the receiver is treated first, and, then, the more challenging case in which non-linear decision feedback multiuser receivers are adopted is addressed. It is shown that, for bot…
This paper proposes a novel channel estimation method and a cluster-based opportunistic scheduling policy, for a wireless energy transfer (WET) system consisting of multiple low-complex energy receivers (ERs) with limited processing capabilities. Firstly, in the training stage, the energy transmitter (ET) obtains a set of Received Signal Strength Indicator (RSSI) feedback values from all ERs, and these values are used to estimate the channels between the ET and all ERs. Next, based on the channel estimates, the ERs are grouped into clusters, and the cluster that has its members closest to its …
In this work, the cross-layer design problem of joint multiuser detection and power control is studied using a game-theoretic approach. The uplink of a direct-sequence code division multiple access (DS-CDMA) data network is considered and a non-cooperative game is proposed in which users in the network are allowed to choose their uplink receivers as well as their transmit powers to maximize their own utilities. The utility function measures the number of reliable bits transmitted by the user per joule of energy consumed. Focusing on linear receivers, the Nash equilibrium for the proposed game …
We explore degrees of freedom (DoF) characterizations of partially connected wireless networks, especially cellular networks, with no channel state information at the transmitters. Specifically, we introduce three fundamental elements --- aligned frequency reuse, wireless index coding and interference diversity --- through a series of examples, focusing first on infinite regular arrays, then on finite clusters with arbitrary connectivity and message sets, and finally on heterogeneous settings with asymmetric multiple antenna configurations. Aligned frequency reuse refers to the optimality of o…
We consider broadcasting a block of packets to multiple wireless receivers under random packet erasures using instantly decodable network coding (IDNC). The sender first broadcasts each packet uncoded once, then generates coded packets according to receivers' feedback about their missing packets. We focus on strict IDNC (S-IDNC), where each coded packet includes at most one missing packet of every receiver. But we will also compare it with general IDNC (G-IDNC), where this condition is relaxed. We characterize two fundamental performance limits of S-IDNC: 1) the number of transmissions to comp…
Recently, joint wireless information and energy transfer (JWIET) methods have been proposed to relieve the battery limitation of wireless devices. However, the JWIET in a general K-user MIMO interference channel (IFC) has been unexplored so far. In this paper, we investigate for the first time the JWIET in K-user MIMO IFC, in which receivers either decode the incoming information data (information decoding, ID) or harvest the RF energy (energy harvesting, EH). In the K-user IFC, we consider three different scenarios according to the receiver mode -- i) multiple EH receivers and a single ID rec…
This paper develops a stochastic geometry-based approach for the modeling and analysis of finite millimeter wave (mmWave) wireless networks where a random number of transmitters and receivers are randomly located inside a finite region. We consider a selection strategy to serve a reference receiver by the transmitter providing the maximum average received power among all transmitters. Considering the unique features of mmWave communications such as directional transmit and receive beamforming and having different channels for line-of-sight (LOS) and non-line-of-sight (NLOS) links according to …
An asymptotic technique is presented for finding the spectral efficiency of multi-antenna links in wireless networks where transmitters have Channel-State-Information (CSI) corresponding to their target receiver. Transmitters are assumed to transmit independent data streams on a limited number of channel modes which limits the rank of transmit covariance matrices. This technique is applied to spatially distributed networks to derive an approximation for the asymptotic spectral efficiency in the interference-limited regime as a function of link-length, interferer density, number of antennas per…
We consider a wireless network where multiple energy harvesting transmitters communicate with the common receiver in a time sharing manner. In each slot, a transmitter can either harvest energy or send its data to the receiver. Given a time deadline, the goal is to maximize the sum-rate of transmitters under random energy arrivals with both perfect and imperfect channel state information (CSI) at the receiver. The original sumrate maximization (SRM) problem is a non-convex mixed integer non-linear program (MINLP). To obtain the optimal scheduling policy, we first reduce the original optimizati…
In this paper, we study a wireless packet broadcast system that uses linear network coding (LNC) to help receivers recover data packets that are missing due to packet erasures. We study two intertwined performance metrics, namely throughput and average packet decoding delay (APDD) and establish strong/weak approximation relations based on whether the approximation holds for the performance of every receiver (strong) or for the average performance across all receivers (weak). We prove an equivalence between strong throughput approximation and strong APDD approximation. We prove that throughput-…
We apply linear network coding (LNC) to broadcast a block of data packets from one sender to a set of receivers via lossy wireless channels, assuming each receiver already possesses a subset of these packets and wants the rest. We aim to characterize the average packet decoding delay (APDD), which reflects how soon each individual data packet can be decoded by each receiver on average, and to minimize it while achieving optimal throughput. To this end, we first derive closed-form lower bounds on the expected APDD of all LNC techniques under random packet erasures. We then prove that these boun…
Physical layer security (PLS) has been shown to hold promise as a new paradigm for securing wireless links. In contrast with the conventional cryptographic techniques, PLS methods exploit the random fading in wireless channels to provide link security. As the channel dynamics prevent a constant rate of secure communications between the legitimate terminals, the outage probability of the achievable secrecy rate is used as a measure of the secrecy performance. This work investigates the secrecy outage probability of a simultaneous wireless information and power transfer (SWIPT) system, which ope…
This paper considers orthogonal frequency division multiple access systems with simultaneous wireless information and power transfer. We study the resource allocation algorithm design for maximization of the energy efficiency of data transmission. In particular, we focus on power splitting hybrid receivers which are able to split the received signals into two power streams for concurrent information decoding and energy harvesting. Two scenarios are investigated considering different power splitting abilities of the receivers. In the first scenario, we assume receivers which can split the recei…
