实验室条件下基于传播的X射线相位衬度测量中用于定量相位恢复的学习方法鲁棒性研究
Investigating the robustness of a learning-based method for quantitative phase retrieval from propagation-based x-ray phase contrast measurements under laboratory conditions
AI总结:
本文研究端到端学习方法在实验室条件下基于传播的X射线相位衬度成像定量相位恢复中的鲁棒性与泛化性,首次证明模拟数据训练的LBM可适用于含多色性、部分相干性和高噪声的实验测量。
摘要:
在实验室条件下,由于部分空间相干性和多色性,对异质且结构复杂的物体进行基于传播的X射线相位衬度成像中的定量相位恢复(QPR)具有挑战性。基于学习的方法(LBM)为这一问题提供了一种非线性途径,同时不受关于物体特性和光束相干性的限制性假设约束。在本工作中,通过评估LBM在典型实验变化下的鲁棒性和泛化性,评估了其在实际场景中的适用性。为此,采用端到端LBM在实验室条件下进行QPR,并研究了其在各种系统和物体条件下的鲁棒性。通过改变传播距离测试了该方法的鲁棒性,并测试了其对物体结构和实验数据的泛化性。尽管LBM在所研究的变化下保持稳定,但发现其成功部署受到数据预处理、网络训练考虑和系统建模相关选择的影响。据我们所知,我们首次证明了在模拟数据上训练的端到端基于学习的定量相位恢复方法对实验室条件下获取的实验性基于传播的X射线相位衬度测量的潜在适用性。我们考虑了实验室条件下典型的多色性、部分空间相干性和高噪声水平条件。本工作进一步探索了该方法对传播距离和物体结构实际变化的鲁棒性,目的是评估其用于实验的潜力。在任何LBM(无论其网络架构如何)实际部署之前进行此类探索,有助于理解其在实验设置下的潜在行为。
英文摘要:
Quantitative phase retrieval (QPR) in propagation-based x-ray phase contrast imaging of heterogeneous and structurally complicated objects is challenging under laboratory conditions due to partial spatial coherence and polychromaticity. A learning-based method (LBM) provides a non-linear approach to this problem while not being constrained by restrictive assumptions about object properties and beam coherence. In this work, a LBM was assessed for its applicability under practical scenarios by evaluating its robustness and generalizability under typical experimental variations. Towards this end, an end-to-end LBM was employed for QPR under laboratory conditions and its robustness was investigated across various system and object conditions. The robustness of the method was tested via varying propagation distances and its generalizability with respect to object structure and experimental data was also tested. Although the LBM was stable under the studied variations, its successful deployment was found to be affected by choices pertaining to data pre-processing, network training considerations and system modeling. To our knowledge, we demonstrated for the first time, the potential applicability of an end-to-end learning-based quantitative phase retrieval method, trained on simulated data, to experimental propagation-based x-ray phase contrast measurements acquired under laboratory conditions. We considered conditions of polychromaticity, partial spatial coherence, and high noise levels, typical to laboratory conditions. This work further explored the robustness of this method to practical variations in propagation distances and object structure with the goal of assessing its potential for experimental use. Such an exploration of any LBM (irrespective of its network architecture) before practical deployment provides an understanding of its potential behavior under experimental settings.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。