Effective planning of long-horizon deformable object manipulation requires suitable abstractions at both the spatial and temporal levels. Previous methods typically either focus on short-horizon tasks or make strong assumptions that full-state information is available, which prevents their use on deformable objects. In this paper, we propose PlAnning with Spatial-Temporal Abstraction (PASTA), which incorporates both spatial abstraction (reasoning about objects and their relations to each other) and temporal abstraction (reasoning over skills instead of low-level actions). Our framework maps high-dimension 3D observations such as point clouds into a set of latent vectors and plans over skill sequences on top of the latent set representation. We show that our method can effectively perform challenging sequential deformable object manipulation tasks in the real world, which require combining multiple tool-use skills such as cutting with a knife, pushing with a pusher, and spreading the dough with a roller.
With the field of rigid-body robotics having matured in the last fifty years, routing, planning, and manipulation of deformable objects have recently emerged as a more untouched research area in many fields ranging from surgical robotics to industrial assembly and construction. Routing approaches for deformable objects which rely on learned implicit spatial representations (e.g., Learning-from-Demonstration methods) make them vulnerable to changes in the environment and the specific setup. On the other hand, algorithms that entirely separate the spatial representation of the deformable object …
We present a novel approach to deformable object manipulation that does not rely on highly-accurate modeling. The key contribution of this paper is to formulate the task as a Multi-Armed Bandit problem, with each arm representing a model of the deformable object. To "pull" an arm and evaluate its utility, we use the arm's model to generate a velocity command for the gripper(s) holding the object and execute it. As the task proceeds and the object deforms, the utility of each model can change. Our framework estimates these changes and balances exploration of the model set with exploitation of h…
In this paper, we propose a novel approach to 3D deformable object manipulation leveraging a deep neural network called DeformerNet. Controlling the shape of a 3D object requires an effective state representation that can capture the full 3D geometry of the object. Current methods work around this problem by defining a set of feature points on the object or only deforming the object in 2D image space, which does not truly address the 3D shape control problem. Instead, we explicitly use 3D point clouds as the state representation and apply Convolutional Neural Network on point clouds to learn t…
Existing shape estimation methods for deformable object manipulation suffer from the drawbacks of being off-line, model dependent, noise-sensitive or occlusion-sensitive, and thus are not appropriate for manipulation tasks requiring high precision. In this paper, we present a real-time shape estimation approach for autonomous robotic manipulation of 3D deformable objects. Our method fulfills all the requirements necessary for the high-quality deformable object manipulation in terms of being real-time, model-free and robust to noise and occlusion. These advantages are accomplished using a joint…
University of California, Los Angeles (UCLA)（加州大学洛杉矶分校（UCLA））
In this paper, we present a synergic learning algorithm to address the task of indirect manipulation of an unknown deformable tissue. Tissue manipulation is a common yet challenging task in various surgical interventions, which makes it a good candidate for robotic automation. We propose using a linear approximate Q-learning method in which human knowledge contributes to selecting useful yet simple features of tissue manipulation while the algorithm learns to take optimal actions and accomplish the task. The algorithm is implemented and evaluated on a simulation using the OpenCV and CHAI3D lib…
LIRMM - Université de Montpellier CNRS（法国国家科学研究中心蒙彼利埃大学信息、机器人、微电子学实验室）；Delft University of Technology（代尔夫特理工大学）；Honda Research Institute, Europe（本田欧洲研究所）；The Hong Kong Polytechnic University（香港理工大学）
This paper proposes a unified vision-based manipulation framework using image contours of deformable/rigid objects. Instead of using human-defined cues, the robot automatically learns the features from processed vision data. Our method simultaneously generates -- from the same data -- both, visual features and the interaction matrix that relates them to the robot control inputs. Extraction of the feature vector and control commands is done online and adaptively, with little data for initialization. The method allows the robot to manipulate an object without knowing whether it is rigid or defor…
Columbia University（哥伦比亚大学）；Toyota Research Institute（丰田研究院）
This paper introduces DextAIRity, an approach to manipulate deformable objects using active airflow. In contrast to conventional contact-based quasi-static manipulations, DextAIRity allows the system to apply dense forces on out-of-contact surfaces, expands the system's reach range, and provides safe high-speed interactions. These properties are particularly advantageous when manipulating under-actuated deformable objects with large surface areas or volumes. We demonstrate the effectiveness of DextAIRity through two challenging deformable object manipulation tasks: cloth unfolding and bag open…
Carnegie Mellon University（卡内基梅隆大学）；UC San Diego（加州大学圣地亚哥分校）；MIT（麻省理工学院）；MIT-IBM Watson AI Lab（麻省理工学院-IBM沃森人工智能实验室）
We consider the problem of sequential robotic manipulation of deformable objects using tools. Previous works have shown that differentiable physics simulators provide gradients to the environment state and help trajectory optimization to converge orders of magnitude faster than model-free reinforcement learning algorithms for deformable object manipulation. However, such gradient-based trajectory optimization typically requires access to the full simulator states and can only solve short-horizon, single-skill tasks due to local optima. In this work, we propose a novel framework, named DiffSkil…
We have seen much recent progress in rigid object manipulation, but interaction with deformable objects has notably lagged behind. Due to the large configuration space of deformable objects, solutions using traditional modelling approaches require significant engineering work. Perhaps then, bypassing the need for explicit modelling and instead learning the control in an end-to-end manner serves as a better approach? Despite the growing interest in the use of end-to-end robot learning approaches, only a small amount of work has focused on their applicability to deformable object manipulation. M…
University of Hong Kong（香港大学）；Centre for Garment Production Limited（制衣生产中心有限公司）
Dynamic state representation learning is an important task in robot learning. Latent space that can capture dynamics related information has wide application in areas such as accelerating model free reinforcement learning, closing the simulation to reality gap, as well as reducing the motion planning complexity. However, current dynamic state representation learning methods scale poorly on complex dynamic systems such as deformable objects, and cannot directly embed well defined simulation function into the training pipeline. We propose DiffSRL, a dynamic state representation learning pipeline…
We present a novel Learning from Demonstration (LfD) method, Deformable Manipulation from Demonstrations (DMfD), to solve deformable manipulation tasks using states or images as inputs, given expert demonstrations. Our method uses demonstrations in three different ways, and balances the trade-off between exploring the environment online and using guidance from experts to explore high dimensional spaces effectively. We test DMfD on a set of representative manipulation tasks for a 1-dimensional rope and a 2-dimensional cloth from the SoftGym suite of tasks, each with state and image observations…
In this paper, we present a general approach to automatically visual-servo control the position and shape of a deformable object whose deformation parameters are unknown. The servo-control is achieved by online learning a model mapping between the robotic end-effector's movement and the object's deformation measurement. The model is learned using the Gaussian Process Regression (GPR) to deal with its highly nonlinear property, and once learned, the model is used for predicting the required control at each time step. To overcome GPR's high computational cost while dealing with long manipulation…
SoftVTBench: A Safety-Aware Visuo-Tactile Benchmark for Physically Constrained Robotic Manipulation of Deformable Objects (Early Version)
Tuojing Intelligence（拓景智能）；Tsinghua University（清华大学）；King’s College London（伦敦国王学院）；Southeast University（东南大学）；Stevens Institute of Technology（史蒂文斯理工学院）；The Hong Kong University of Science and Technology (Guangzhou)（香港科技大学（广州））；University of Manchester（曼彻斯特大学）；Simple AI（简单人工智能公司）；Imperial College London（伦敦帝国学院）；Carnegie Mellon University（卡内基梅隆大学）；Zhejiang University（浙江大学）；Beihang University（北京航空航天大学）；The University of Hong Kong（香港大学）
Cognitive Robotics, TU Delft（代尔夫特理工大学认知机器人）；Honda Research Institute, Europe（本田研究院欧洲）；LIRMM - Université de Montpellier CNRS（蒙彼利埃大学 CNRS LIRMM）；COSMER laboratory EA 7398, Universié de Toulon（土伦大学 COSMER 实验室 EA 7398）；The Hong Kong Polytechnic University（香港理工大学）；University of Texas at Austin（德克萨斯大学奥斯汀分校）；University of Michigan（密歇根大学）；Università degli Studi di Napoli Federico II（那不勒斯费德里科二世大学）；Osaka University（大阪大学）；National Institute of AIST（产业技术综合研究所）；Tsinghua University（清华大学）；The University of Hong Kong（香港大学）；Robotics Institute, Carnegie Mellon University（卡内基梅隆大学机器人研究所）
Deformable object manipulation (DOM) is an emerging research problem in robotics. The ability to manipulate deformable objects endows robots with higher autonomy and promises new applications in the industrial, services, and healthcare sectors. However, compared to rigid object manipulation, the manipulation of deformable objects is considerably more complex, and is still an open research problem. Addressing DOM challenges demand breakthroughs in almost all aspects of robotics, namely hardware design, sensing, (deformation) modeling, planning, and control. In this article, we review recent adv…
DeformGen: Dynamics-Based Topology Augmentation for Deformable Manipulation Policy Learning
Shanghai Jiao Tong University（上海交通大学）；Eastern Institute of Technology, Ningbo（宁波东方理工大学）；Tsinghua University（清华大学）；The Hong Kong Polytechnic University（香港理工大学）；University of Science and Technology of China（中国科学技术大学）；Zhongguancun Academy（中关村学院）；Microsoft Research（微软研究院）
Stanford University（斯坦福大学）；The University of Texas at Austin（德克萨斯大学奥斯汀分校）；NVIDIA（英伟达）；Caltech（加州理工学院）
Manipulating volumetric deformable objects in the real world, like plush toys and pizza dough, bring substantial challenges due to infinite shape variations, non-rigid motions, and partial observability. We introduce ACID, an action-conditional visual dynamics model for volumetric deformable objects based on structured implicit neural representations. ACID integrates two new techniques: implicit representations for action-conditional dynamics and geodesics-based contrastive learning. To represent deformable dynamics from partial RGB-D observations, we learn implicit representations of occupanc…
The University of North Carolina（北卡罗来纳大学）；City University of Hong Kong（香港城市大学）
In this paper, we present a general learning-based framework to automatically visual-servo control the position and shape of a deformable object with unknown deformation parameters. The servo-control is accomplished by learning a feedback controller that determines the robotic end-effector's movement according to the deformable object's current status. This status encodes the object's deformation behavior by using a set of observed visual features, which are either manually designed or automatically extracted from the robot's sensor stream. A feedback control policy is then optimized to push t…
Dexterous Manipulation of Deformable Objects via Pneumatic Gripping: Lifting by One End
Osaka University（大阪大学）；National Institute of Advanced Industrial Science and Technology (AIST)（日本国立先进工业科学技术研究所（AIST））；The University of Texas at Austin（得克萨斯大学奥斯汀分校）；Ternopil Ivan Puluj National Technical University（捷尔诺波尔伊万·普卢伊国立技术大学）；UT Southwestern Medical Center（德克萨斯大学西南医学中心）
Collocated tactile sensing is a fundamental enabling technology for dexterous manipulation. However, deformable sensors introduce complex dynamics between the robot, grasped object, and environment that must be considered for fine manipulation. Here, we propose a method to learn soft tactile sensor membrane dynamics that accounts for sensor deformations caused by the physical interaction between the grasped object and environment. Our method combines the perceived 3D geometry of the membrane with proprioceptive reaction wrenches to predict future deformations conditioned on robot action. Grasp…
University of North Carolina at Chapel Hill（北卡罗来纳大学教堂山分校）；City University of Hong Kong（香港城市大学）
The complex physical properties of highly deformable materials such as clothes pose significant challenges fanipulation systems. We present a novel visual feedback dictionary-based method for manipulating defoor autonomous robotic mrmable objects towards a desired configuration. Our approach is based on visual servoing and we use an efficient technique to extract key features from the RGB sensor stream in the form of a histogram of deformable model features. These histogram features serve as high-level representations of the state of the deformable material. Next, we collect manipulation data …
Tsinghua University（清华大学）；The Chinese University of Hong Kong（香港中文大学）
The deformable linear objects (DLOs) are common in both industrial and domestic applications, such as wires, cables, ropes. Because of its highly deformable nature, it is difficult for the robot to reproduce human's dexterous skills on DLOs. In this paper, the unknown deformation model is estimated in both the offline and online manners. The offline learning aims to provide a good approximation prior to the manipulation task, while the online learning aims to compensate the errors due to insufficient training (e.g. limited datasets) in the offline phase. The offline module works by constructin…
Soft Contact Simulation and Manipulation Learning of Deformable Objects with Vision-based Tactile Sensor
School of Mechanical Engineering, Anhui University of Technology（安徽工业大学机械工程学院）；School of Engineering and Technology, China University of Geosciences (Beijing)（中国地质大学（北京）工程技术学院）
Carnegie Mellon University（卡内基梅隆大学）；Stanford University（斯坦福大学）；NVIDIA（英伟达）；University of Washington（华盛顿大学）；The University of Sydney（悉尼大学）
Deformable object manipulation remains a challenging task in robotics research. Conventional techniques for parameter inference and state estimation typically rely on a precise definition of the state space and its dynamics. While this is appropriate for rigid objects and robot states, it is challenging to define the state space of a deformable object and how it evolves in time. In this work, we pose the problem of inferring physical parameters of deformable objects as a probabilistic inference task defined with a simulator. We propose a novel methodology for extracting state information from …
Coordinated Manipulation of Hybrid Deformable-Rigid Objects in Constrained Environments
Department of Mechanical and Nuclear Engineering, Khalifa University（卡利法大学机械与核工程系）；Khalifa University Center for Autonomous Robotic Systems (KUCARS)（卡利法大学自主机器人系统中心）；Department of Computer Science, Khalifa University（卡利法大学计算机科学系）
Manipulating deformable objects, such as ropes and clothing, is a long-standing challenge in robotics, because of their large degrees of freedom, complex non-linear dynamics, and self-occlusion in visual perception. The key difficulty is a suitable representation, rich enough to capture the object shape, dynamics for manipulation and yet simple enough to be estimated reliably from visual observations. This work aims to learn latent Graph dynamics for DefOrmable Object Manipulation (G-DOOM). G-DOOM approximates a deformable object as a sparse set of interacting keypoints, which are extracted au…
Technical University of Munich（慕尼黑工业大学）；University of Innsbruck（因斯布鲁克大学）；German Aerospace Center (DLR)（德国航空航天中心（DLR））
The definition of symbolic descriptions that consistently represent relevant geometrical aspects in manipulation tasks is a challenging problem that has received little attention in the robotic community. This definition is usually done from an observer perspective of a finite set of object relations and orientations that only satisfy geometrical constraints to execute experiments in laboratory conditions. This restricts the possible changes with manipulation actions in the object configuration space to those compatible with that particular external reference definitions, which greatly limits …
Robotic manipulation of deformable objects is a difficult problem especially because of the complexity of the many different ways an object can deform. Searching such a high dimensional state space makes it difficult to recognize, track, and manipulate deformable objects. In this paper, we introduce a predictive, model-driven approach to address this challenge, using a pre-computed, simulated database of deformable object models. Mesh models of common deformable garments are simulated with the garments picked up in multiple different poses under gravity, and stored in a database for fast and e…
University of California, Berkeley（加州大学伯克利分校）；Mitsubishi Electric Research Laboratories（三菱电机研究实验室）
This paper presents a novel trajectory optimization formulation to solve the robotic assembly of the belt drive unit. Robotic manipulations involving contacts and deformable objects are challenging in both dynamic modeling and trajectory planning. For modeling, variations in the belt tension and contact forces between the belt and the pulley could dramatically change the system dynamics. For trajectory planning, it is computationally expensive to plan trajectories for such hybrid dynamical systems as it usually requires planning for discrete modes separately. In this work, we formulate the bel…
