arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2210.15522physics.flu-dyn
收藏

倒置液膜滴落转变的研究

On the transition to dripping of an inverted liquid film

M. G. Blyth, T. -S. Lin, D. Tseluiko

AI总结:

该研究在零雷诺数下探究倾斜平板下方倒置液膜的滴落转变,通过三类模型对比分析不同条件下的行波解失稳与分岔特性,明确薄膜模型对滴落起始的预测能力。

摘要:

本文在零雷诺数条件下,研究了倾斜平板下方重力驱动液膜流动中的滴落转变问题。我们在周期域上开展计算,针对一系列模型分别采用固定流体体积或固定流量的假设:两类润滑模型(分别采用线性化曲率的LCM和全曲率的FCM),以及完整的Stokes流动方程。研究重点关注当平板倾角增大时行波解的失稳现象。对于任意固定体积,LCM模型会达到水平状态,此时液膜呈现余弦形轮廓。当体积足够小时,FCM模型与Stokes方程的解会呈现弱的Young-Laplace平衡轮廓,我们通过推广Kalliadasis & Chang (1994)针对LCM的渐近分析,描述了趋近该平衡的过程。当体积较大时,FCM与Stokes模型的分岔曲线存在转折点,因此系统永远无法达到完全倒置的状态。在固定流量条件下,LCM模型会在一个临界倾角处发生爆破,该临界角可由渐近分析准确预测。FCM的分岔曲线要么存在转折点,要么达到表面轮廓出现无限斜率奇异性的点,这标志着多值性的开始;Stokes模型证实了这一点,其解可延拓得到翻转的表面轮廓。总体而言,薄膜模型要么能准确预测滴落的起始点,要么能给出临界倾角的上界。

英文摘要:

The transition to dripping in the gravity-driven flow of a liquid film under an inclined plate is investigated at zero Reynolds number. Computations are carried out on a periodic domain assuming either a fixed fluid volume or a fixed flow rate for a hierarchy of models: two lubrication models with either linearised curvature or full curvature (the LCM and FCM, respectively), and the full equations of Stokes flow. Of particular interest is the breakdown of travelling-wave solutions as the plate inclination angle is increased. For any fixed volume the LCM reaches the horizontal state where it attains a cosine-shaped profile. For sufficiently small volume, the FCM and Stokes solutions attain a weak Young-Laplace equilibrium profile, the approach to which is described by an asymptotic analysis generalising that of Kalliadasis & Chang (1994) for the LCM. For large volumes, the bifurcation curves for the FCM and Stokes model have a turning point so that the fully inverted state is never reached. For fixed flow rate the LCM blows up at a critical angle that is well predicted by asymptotic analysis. The bifurcation curve for the FCM either has a turning point or else reaches a point at which the surface profile has an infinite slope singularity, indicating the onset of multi-valuedness. The latter is confirmed by the Stokes model which can be continued to obtain overturning surface profiles. Overall the thin-film models either provide an accurate prediction for dripping onset or else supply an upper bound on the critical inclination angle.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑